Atlanta Synthesi pirkti naudotą (59)

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23SynthesiLow04, Demonstration machine, as new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope formation at the pallet, mounted to the frame, for reinforcement of the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, independent adjustment for up and down movement Acoustic signal at start of wrapping and end of cycle Emergency stop switch according to CE regulations Turntable always stops at the same start position Anti-fall protection for the film carriage Push buttons for machine power, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F00 – Display lock for program modification F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photoelectric sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / upward & downward individually adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01–1 – Cross wrapping (up/down) F01–2 – Single wrapping (only up or only down) F01–3 – Push button for manual functions F10–F11 – Wrapping cycle with specified start and stop height F12 – Wrapping to a preset height (with photoelectric height sensor deactivated) Njdoykucmopfx Ahcswl F22 / F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for attaching edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Reinforcement cycle activated by push button FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film lay-on tension electronically controlled via control unit Film specifications: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm Standard connection data: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Sprocket for OPRS pre-stretch ratio 150% / 250% / 300% possible Additional systems available from Ludwigsburg stock.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long TECHNICAL DETAILS: LOW PROFILE turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · Ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at the start of wrapping and at the end of the cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Pushbutton for machine power-on as well as start & stop function & reset in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Infinitely variable turntable speed 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage speed up from 1.3 to 5.4 m/min F04 - Carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photo sensor delay for wrap height F13 - F16 - Film tension for base & top wrapping / ascent & descent, independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAP PROGRAMS AT THE CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrap (upwards/downwards) F01 - 2 - Simple wrap (upwards only or downwards only) F01 - 3 - Pushbutton for manual functions F10 - F11 - Wrapping cycle with pre-set start and stop height F12 - Wrapping to a stored height (disabling light sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for applying edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V - 1PH+N+PE - 50/60 Hz Total power: 1.2 kW / 8A Optional: Gears for OPRS pre-stretch ratio of 150% / 250% / 300% available Nwedpfx Aheykuiaecjl Further machines available from stock in Ludwigsburg.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at wrapping start and at cycle end Emergency stop switch according to CE regulations Turntable always stops at the same starting position Anti-fall device for the film carriage Push button for machine power-on, start & stop function, and reset per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display/program lock F02 - Continuously variable turntable speed 5-12 rpm Carriage travel speed upwards and downwards adjustable independently F03 - Carriage travel speed upwards from 1.3 to 5.4 m/min F04 - Carriage travel speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) Nwsdpfjykub Aox Ahcsl F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photoelectric cell delay for wrapping height F13 - F16 - Film application tension for bottom & top wraps / ascent & descent adjustable independently F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 programmable wrapping cycles F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Single wrapping (upwards only or downwards only) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (disables height detection photoeye) F22 / F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for corner protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Optional: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Mounting frame Photoelectric sensor for dark products Film cutting device etc. Further systems available ex-stock Ludwigsburg. Images may contain optional extras subject to surcharge. Image similar

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: S23Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photo sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops at the same home position Fall protection for the film carriage Pushbuttons for machine ON, start & stop function, and reset per CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA OPERATOR PANEL All function parameters adjustable via display F00 - Locking of display to prevent program changes F02 - Steplessly adjustable turntable speed 5-12 rpm Carriage speed for upward and downward movement adjustable independently F03 - Carriage upward speed from 1.3 up to 5.4 m/min F04 - Carriage downward speed from 1.3 up to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Delay for photocell wrapping height F13 - F16 - Film tension for bottom & top wraps / ascent & descent adjustable independently F62 - Ergonomic height for film exchange Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA OPERATOR PANEL 6 wrappable programs can be stored F01 - 1 - Cross wrapping (up/down) F01 - 2 - Simple wrapping (only up or only down) F01 - 3 - Pushbutton for manual functions F10 - F11 - Wrapping cycle with pre-set start and stop height Nwsdpfsykuddex Ahcsl F12 - Wrapping to a stored height (with height sensor deactivated) F22 / F23 - Wrapping cycle for top cover foil F29 - Soft start cycle for application of corner protection F30 - F31 - Wrapping cycles with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet corners Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle by pushbutton FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on film carriage Film spec: max. outer diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A Optional: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200 % Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Film cutting device etc. Further machines available from Ludwigsburg stock. Images may include options subject to additional charge.

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SFERA21Kommission1, Stretch Wrapper ATLANTA SFERA Easy 6 individually programmable wrapping cycles Wrapping height: 2200 mm Mast height: 2050 mm (fits through almost any doorway) FE electromagnetic film brake Film tensioning electronically controlled via control unit Film specifications: Max. outer diameter Ø300 mm – Height = 500 mm – Core Ø76 mm GMK (Compass): Start and end of wrapping always identical Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series 160 pallets per charge – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, pallet included): 2,150 mm Height detection by photoelectric sensor or manual height input via display Protective bar for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light on machine start-up Fall protection for film carriage Push button for start & stop Machine operation according to CE standard Ø 22 mm ADJUSTABLE PARAMETERS AT CONTROL PANEL: All function parameters adjustable via display F00 – Display lock for program change F02 – Adjustable machine speed around the pallet up to 80 m/min Carriage speed up and down can be set independently F03 – Upward carriage speed from 1.3 to 5.4 m/min F04 – Downward carriage speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Setting pallet wrapping height Nodjz Dvi Rjpfx Ahcowl F13–F16 – Film tension setting for foot & top wrapping / up & down independently adjustable F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01-1 – Cross wrapping (upwards/downwards) F01-2 – Single wrapping (only upwards or only downwards) F10, F11 – Wrapping cycle with predetermined start and stop height F12 – Wrapping to a stored height (deactivates photoelectric height sensor) F21 – Wrapping cycle for pallets with large dimensions F22/F23 – Cycle for applying top sheet film F29 – Soft start cycle for applying edge protection F30, F31 – Cycle with reinforcement and adjustable wrap count Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Optional photocell for dark packaged goods *Leasing: 48 months term // 0 down payment The machine was in use for 3 months as a replacement unit at a customer site. Has some scratches – also on the housing – see pictures. Machine is in excellent condition. More pictures available upon request. The machine can be inspected in Ludwigsburg by appointment. Immediately available. Price ex works Ludwigsburg.

Būklė: naudotas, Gamybos metai: 2015, Apžvalga Šis „Atlanta Giotto“ yra vieno eismo juostos kartoninė įvyniojamoji pakavimo mašina, skirta PET butelių galutiniam pakavimui į kartonines dėžes, kurios gali būti pakuojamos daugiau nei 20 dėžių per minutę. Mašina suformuoja įvyniojamąją kartoninę dėžę iš plokščios iškirptos detalės, kuri laikoma pakreiptame žurnale, aplenkia butelių grupę ir užsandarina karšto klijų įtaisu. Mašina gali apdoroti tiek neutralias, tiek atspausdintas dėžes. Nedpfxozxtyre Ahcowl Mašina buvo pagaminta 2015 m. ir iki 2025 m. pradžios naudota mineralinio vandens butelių gamykloje, kurioje buvo pakuojamos 1,5 l PET buteliai po 4 x 3 dėžėse ir 1,0 l PET buteliai po 5 x 3 dėžėse. Mašina buvo eksploatuojama pakaitomis su termoplevelės įvyniojimo būdu, todėl jos veikimo valandos yra nedidelės. Mašina valdoma „Siemens S7“ PLC su jutikliniu HMI skydeliu. Į tiekimo ir išėjimo konvejerius, pavaras ir CE valdymo skydelį įeina patys mašinos komponentai. Techniniai duomenys - Gamintojas: „Atlanta“ - Modelis: „Giotto“ - Pagaminimo metai: 2015 - Mašinos tipas: vieno eismo juostos įvyniojamoji kartoninė pakavimo mašina - Talpa: daugiau nei 20 dėžių per minutę - Tiekimas: vieno eismo juostos, pakreiptas kartoninis žurnalas - Kartoninės dėžės matmenys: 80 x H262 mm (1,5 l PET buteliams), 87,5 x H322 mm (1,0 l PET buteliams) - Pakavimo schema: 4 x 3 buteliai po 1,5 l PET, 5 x 3 buteliai po 1,0 l PET - Kartoninė dėžė: neutrali arba atspausdinta - Kartoninės dėžės uždarymas: karšto klijų įtaisas - Valdymas: „Siemens S7“ PLC su jutikliniu HMI skydeliu - Ilgis: apytiksliai 7 175 mm (mašinos korpusas), plius 1 300 mm (tiekimo konvejeris) - Plotis: apytiksliai 2 345 mm - Aukštis: apytiksliai 2 336 mm - Tiekimo aukštis: min. 1 050 mm - Svoris: apytiksliai 800 kg (žurnalo dalis), apytiksliai 2 250 kg (pakavimo mašinos korpusas) - Maitinimas: 25 kW - Suspaustas oras: apytiksliai 400 Nl/min esant 6 bar slėgiui - Tiekimo juosta: acetalinis polimeras, 685 mm pločio Įranga - Tiekimo ir išėjimo konvejeriai - Reguliuojamas kartoninis žurnalas - Karšto klijų įtaisas - Pavara ir CE standartų atitinkantis valdymo skydelis - „Siemens S7“ valdiklis su jutikliniu valdymo skydeliu - Elektros ir mechaninės schemos - Aptarnavimo ir priežiūros vadovai - Atsarginių dalių katalogai Būklė Naudota, labai geroje būklėje, su mažu veikimo valandų skaičiumi. Mašina buvo eksploatuojama iki 2025 m. pradžios, o vėliau buvo išmontuota ir sandėliuota. Išmontuotoje būklėje ji gali būti apžiūrėta sandėlyje, susitarus. Prieinamumas Pasiekiama nedelsiant. Vieta: Italija. Kėlimo, krano, pakrovimo ir transportavimo paslaugos teikiamos pagal atskirą užklausą ir nėra įtrauktos į kainą.

Būklė: naudotas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: LC591, Technical Specifications & Performance Data This complete used bottling line is designed for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utility and process installations. The line integrates components from renowned manufacturers to ensure consistent quality and availability in industrial packaging environments. Production speed: up to 8,000 bottles per hour Nwsdpfx Ahsyhbibjcel Compatible bottle formats: 0.33 L, 0.5 L, 0.75 L, 1.0 L, 1.5 L, 2.0 L Containers: PET and glass bottles Main filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping heads Stretch blow molding machine: Easy Blow 4L (4,200 bph nominal) Labeling machines: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bph Packaging & handle application: SMI LSK 30 T Ergon shrink wrapper, SMI Pack HA-25 SX handle applicator Pallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; additional manual wrapper Process & utility systems: GEA pasteurization unit HTF 3000PIN/19; GEA CIP system; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G booster) Inspection & coding: FT System for fill volume/cap/label control; Hitachi UX printer Advanced Automation & Control Systems The line is equipped with modern automation and quality assurance systems for stable operation and reproducible product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while in-line inspection and coding ensure regulatory compliance and traceability. PLC/HMI: PLC installed for central control and recipe management Inspection: FT System for fill level, cap presence/position, and label verification Electrical: 400 V, 50 Hz, 16 A reference (component level) Coding: Hitachi UX inkjet printer for date/batch marking Format changes: Designed for multiple bottle formats for PET and glass Safety: Standard protective enclosures and emergency stop switches at all stations Line Integration Capability Purpose-built for flexible beverage production, the line integrates upstream preform handling and stretch blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyor systems ensure gentle bottle transport and buffering. Upstream: Preform feeder and hopper, Easy Blow 4L stretch blow molding machine Conveyors: Vetromeccanica Eolo air and line conveyor systems Format flexibility: 0.33 L to 2.0 L for PET and glass End-of-line: Shrink wrapping, handle application, palletiz...

Būklė: naudotas, Gamybos metai: 2015, Overview The tray packer was built in 2015 by the Italian manufacturer Atlanta. The machine is in good condition, has already been professionally dismantled, and is now in storage. Technical Details Capacity: 15 trays per minute Specifications: - Currently configured for single-lane infeed - A complete set of new parts for dual-lane infeed is included in the delivery - For carton thickness: 2 to 5 mm - Flap closes from below Nwjdpfxorkgzke Ahcsl Current configuration: - For PET bottles 0.25L & 0.50L - 4 packs/tray in 3x4 configuration for 0.25L bottles - 4 packs/tray in 2x3 configuration for 0.50L bottles - In neutral or printed cartons Machine control: - Siemens S7 touchscreen - Machine equipped with infeed and outfeed conveyors

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25Lybra04, Exhibition unit – like new. LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet size: 1,200 x 1,200 mm Rotating arm with high-resistance ball bearings Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage lift speed, independent adjustment for upward/downward movement Acoustic signal at wrap start and cycle end Emergency stop button compliant with CE regulations Positioning aid for correctly placing the pallet included in delivery Safety bumper for collision protection Push buttons for power on and start/stop functions according to CE standards (Ø 22 mm) ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 – Infinitely variable turntable speed 5–12 rpm Carriage lift speed upwards and downwards can be set independently F03 – Carriage lift speed upwards from 1.3 to 5.4 m/min F04 – Carriage lift speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrap height detection F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 3 programmable wrapping programs F01 – 1 – Cross wrapping (upward/downward) F01 – 2 – Single wrapping (upward or downward only) F01 – 3 – Push button for manual functions F12 – Wrapping to a preset height (with deactivation of height photo sensor) F22 / F23 – Wrapping cycle for top sheet film F29 – Soft start cycle for application of edge protection Nodoykubispfx Ahcewl Soft start cycle to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE Via electromagnetically braked roller Film specification: Max. outer diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard power supply: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A – 1.75 kW / 8.5 A (with PRS / PS) Optionally also available with manual rope-forming device. Additional units immediately available from stock in Ludwigsburg.

Gamybos metai: 2024, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23NEOS04, Demo unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through nearly any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film tension electronically controlled via control unit Quick insertion system IEF for easy film roll change Film specifications: Max. outer diameter Ø300 mm – Height = 500 mm – Core Ø76 mm Automatic film cutting unit Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – Charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (Pallet Included): 2,150 mm Height detection via photoelectric sensor or by input on display Protective bar for emergency stop of drive unit Emergency stop switch as per CE regulations Acoustic warning signal and warning light on machine start-up Fall protection for the film carriage Push button for Start & Stop Machine safety complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL: All functional parameters adjustable via display - Display lock for program changes Nwodpsv Iqrbofx Ahcjl - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed up and down independently adjustable - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10) - Number of wraps at pallet top (1–10) - Setting for pallet wrapping height - Film application tension for base/top wrap and ascent/descent independently adjustable - Film pre-stretch for base/top wrap and ascent/descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrap (upward/downward) - Simple wrap (upward or downward only) - Wrapping cycle with predefined start and stop height - Wrapping to a preset height (with light sensor deactivated) - Wrapping cycle for pallets with large dimensions - Wrapping cycle for top sheet - Soft start cycle for application of edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears at sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Additional units available immediately from stock Ludwigsburg

Gamybos metai: 2024, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: S23EVA01, Stretch Wrapper EVA *Leasing – 48 months term, no down payment TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power-on as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All operating parameters adjustable via display F02 – Infinitely variable turntable speed: 5–12 rpm Nwsdou Tk Etepfx Ahcel Carriage speed up and down adjustable independently F03 – Upward carriage speed: 1.3 to 5.4 m/min F04 – Downward carriage speed: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Pallet wrapping height adjustment F62 – Ergonomic height for film replacement ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (upwards only or downwards only) F01-3 – Manual wrapping F12 – Wrapping up to a stored height (disabling photoelectric sensor) F29 – Soft-start cycle for edge protection application Soft-start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard power supply: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Options: Turntable 1,650 mm Ramp Installation frame Photoelectric sensor for black products Additional units available from stock in Ludwigsburg.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S22EVA_07, Demonstration machine - like new. EVA Base frame raised by 150mm - 200mm, for loading with electric pallet truck or forklift - height adjustable Turntable diameter: 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, adjustable up/down Acoustic signal at wrapping start and stop at end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops at the same home position Anti-drop protection for film carriage Push buttons for machine power-on as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F02 - Continuously adjustable turntable speed 5-12 rpm Carriage speed for up and down travel adjustable independently F03 - Upward carriage speed from 1.3 to 5.4 m/min F04 - Downward carriage speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Setting for pallet wrapping height F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - Cross-wrapping (upward/downward) F01 - 2 - Simple wrapping (up or down only) F01 - 3 - Manual wrapping F12 - Wrapping to a predefined height (disables photoelectric sensor) F29 - Soft-start cycle for application of edge protectors Nsdpfx Asykuhcjhcowl Soft-start function reduces film breakage on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Max. external diameter Ø 250 mm - Core Ø 76mm - Height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Additional units available from stock for immediate delivery.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23NEOS04, Demo unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through nearly any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film tension electronically controlled via control unit Quick insertion system IEF for easy film roll change Film specifications: Max. outer diameter Ø300 mm – Height = 500 mm – Core Ø76 mm Automatic film cutting unit Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – Charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (Pallet Included): 2,150 mm Height detection via photoelectric sensor or by input on display Protective bar for emergency stop of drive unit Emergency stop switch as per CE regulations Acoustic warning signal and warning light on machine start-up Fall protection for the film carriage Push button for Start & Stop Machine safety complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL: All functional parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed up and down independently adjustable - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10) - Number of wraps at pallet top (1–10) - Setting for pallet wrapping height - Film application tension for base/top wrap and ascent/descent independently adjustable - Film pre-stretch for base/top wrap and ascent/descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrap (upward/downward) - Simple wrap (upward or downward only) - Wrapping cycle with predefined start and stop height - Wrapping to a preset height (with light sensor deactivated) - Wrapping cycle for pallets with large dimensions - Wrapping cycle for top sheet Nedpoykug Sefx Ahcswl - Soft start cycle for application of edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears at sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Additional units available immediately from stock Ludwigsburg

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23NEOS06, Demonstration unit: ATLANTA NEOS stretch wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Includes 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any doorway) Film power stretch 120-400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically controlled via control unit Quick-change system (IEF) for easy film roll replacement Film specifications: Max. external diameter Ø300 mm – height = 500 mm – core Ø76mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height “machine with mast” (pallet included) 2,150 mm Height detection by photoelectric sensor or by entering dimensions on display Protective bar for emergency stop Emergency stop switch according to CE regulations Acoustic warning signal and warning light during machine start-up Anti-drop safety device for film carriage Push-buttons for start & stop Machine operation according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program change - Adjustable machine rotation speed around the pallet up to 80 m/min - Carriage ascent and descent speed independently adjustable • Carriage ascent speed: 1.3 to 5.4 m/min Nsdpfx Ajyktv Sjhcewl • Carriage descent speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Setting the pallet wrapping height - Film tension for bottom/top wraps and carriage ascent/descent independently adjustable - Film pre-stretch for bottom/top wraps and carriage ascent/descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrap (upward/downward) - Simple wrap (upward or downward only) - Wrapping cycles with predefined start and stop heights - Wrapping to a preset height (ignoring the photoelectric sensor) - Wrapping cycle for large pallet dimensions - Wrapping cycle for top sheet application - Soft-start cycle for edge protection installation - Wrapping cycle with reinforcement and adjustable number of wraps Soft-start to prevent film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Additional units are immediately available from our Ludwigsburg stock. #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25EVA01, Stretch Wrapper EVA *Leasing – 48 months term, no down payment TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Nodpfjykucysx Ahcowl Fall protection for film carriage Push button for machine power-on as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All operating parameters adjustable via display F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed up and down adjustable independently F03 – Upward carriage speed: 1.3 to 5.4 m/min F04 – Downward carriage speed: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Pallet wrapping height adjustment F62 – Ergonomic height for film replacement ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (upwards only or downwards only) F01-3 – Manual wrapping F12 – Wrapping up to a stored height (disabling photoelectric sensor) F29 – Soft-start cycle for edge protection application Soft-start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard power supply: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Options: Turntable 1,650 mm Ramp Installation frame Photoelectric sensor for black products Additional units available from stock in Ludwigsburg.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25Lybra02, LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter: Ø 1,700 mm Height: 2,200 mm Max. pallet dimensions: 1,200 x 1,200 mm Rotating arm with high-resistance ball bearings Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at wrapping start and stop at cycle end Emergency stop switch according to CE regulations Positioning aid for correct pallet placement included Safety bumper for collision protection Push-buttons for machine on/off and start/stop functions in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F02 - Continuously adjustable turntable speed from 5-12 rpm Carriage speed upward and downward can be set independently F03 - Carriage upward speed from 1.3 to 5.4 m/min F04 - Carriage downward speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photo cell delay for wrapping height F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 3 storable wrapping programs F01 - 1 - Cross wrapping (upward/downward) Nwedpfxeykudke Ahcol F01 - 2 - Simple wrapping (upward only or downward only) F01 - 3 - Pushbutton for manual functions F12 - Wrapping to a preset height (with height sensor deactivated) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for application of edge protection Soft start cycle reduces film tearing at sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on the film carriage Film specifications: Max. outer diameter Ø 250 mm - Core Ø76 mm - Height = 500 mm Standard connection data: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Optional: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE Via electromagnetically braked roller Film specifications: Max. outer diameter Ø 250 mm - Core Ø76 mm - Height = 500 mm Standard connection data: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A – 1.75 kW / 8.5A (with PRS / PS) Manual rope formation also available as an option. Additional systems available immediately from stock in Ludwigsburg.

Gamybos metai: 2026, veikimo valandos: 2 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S22EVA_03, Demonstration machine – like new. EVA Raised turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Base frame raised by 150mm - 200mm, adjustable for loading with electric pallet truck Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at the start of wrapping and at the end of the cycle Emergency stop switch according to CE regulations Turntable always stops in the same starting position Fall protection for the film carriage Pushbuttons for machine power on as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 - Infinitely adjustable turntable speed 5-12 rpm Carriage speed independently adjustable for upward and downward movement F03 - Carriage speed upwards from 1.3 up to 5.4 m/min F04 - Carriage speed downwards from 1.3 up to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Setting of pallet wrap height F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (only up or only down) Nwedpfx Ahsykud Docol F01 - 3 - Manual wrapping F12 - Wrapping to a preset height (color sensor deactivated) F29 - Soft start cycle for application of edge protection Soft start to reduce film breakage at sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on the film carriage Film specification: max. outer diameter Ø 250 mm - core Ø76 mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Further systems available from stock for immediate delivery.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25MythoSarya05, Exhibition unit Mytho S Nsdpfx Ahsykuh Njcewl with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: S23SFERA05, Mobile Stretch Wrapper ATLANTA SFERA Easy TECHNICAL DETAILS: - Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series - 160 pallets per charge – charging time: 8–10 hours - High-frequency battery charger with LED indicator - Wrapping height “machine with mast (pallet included): 2,150 mm - Height detection via photoelectric sensor or manual entry on the display - Safety bar for emergency stop of the drive unit - Emergency stop switch in accordance with CE regulations - Acoustic warning signal and warning light at machine startup - Fall protection for the film carriage - Push buttons for Start & Stop - Machine operation compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: - All functional parameters adjustable via display - F00 – Display lock for program modification - F02 – Adjustable machine speed around the pallet up to 80 m/min - Carriage speed upward and downward can be set independently - F03 – Carriage speed upwards from 1.3 to 5.4 m/min - F04 – Carriage speed downwards from 1.3 to 5.4 m/min - F05 – Number of wraps at pallet base (1–10 wraps) - F06 – Number of wraps at pallet top (1–10 wraps) - F09 – Pallet wrap height setting - F13–F16 – Film tension at base & top wrapping / ascent & descent independently adjustable - F17–F20 – Film pre-stretch at base & top wrapping / ascent & descent independently adjustable - F62 – Ergonomic height for film roll change - Film consumption indicator (option for PRS–PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01-1 – Cross wrapping (upwards/downwards) - F01-2 – Simple wrapping (upwards only or downwards only) - F10–F11 – Wrapping cycle with predefined start and stop heights - F12 – Wrapping to a preset height (disabling the photoelectric sensor for height) - F21 – Wrapping cycle for large-size pallets - F22/F23 – Wrapping cycle for top sheet application - F29 – Soft-start cycle for application of edge protection - F30–F31 – Wrapping cycles with reinforcement and adjustable number of wraps - Soft-start to reduce film tearing on sharp pallet corners - Wrapping cycle with manual or motorized roping (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE: - Brake tension manually adjustable from carriage by tension roller - Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm - Optional: stretch film with core Ø 50 mm or coreless - Standard connection: 230 V – 1L+N+PE – 50 Hz Options available: - Wrapping height up to 3500 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” 200% - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120–400% - Automatic roping system for reinforced wrapping - Automatic system for cutting film into 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to –5°C - LITHIUM RELION BATTERIES 2 x 12V Nwsdpfxjykty Ds Ahcjl Additional systems available from stock in Ludwigsburg. Image for reference only.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25SFERA06, Mobile Stretch Wrapper ATLANTA SFERA Easy *Leasing available // from €180.51/month for 48 months with €0 down payment TECHNICAL DETAILS: - Two maintenance-free AGM batteries 12 V – 100 Ah connected in series - 160 pallets per charge – Charging time: 8–10 hours - High-frequency battery charger with LED indicator - Wrapping height “Machine with mast (pallet included) 2,000 mm; optionally up to 2,400 mm - Height detection via photoelectric sensor or input via display - Safety bar for emergency stop of the drive - Emergency stop switch in accordance with CE regulations - Audible warning signal and warning light at machine startup - Fall protection system for the film carriage - Pushbutton for start & stop - Machine functions according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL: - All function parameters can be set via display - F00 - Display/programming lock - F02 - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed for ascent and descent can be set independently - F03 - Carriage ascent speed from 1.3 to 5.4 m/min - F04 - Carriage descent speed from 1.3 to 5.4 m/min - F05 - Number of wraps at pallet base (1 - 10 wraps) - F06 - Number of wraps at pallet top (1 - 10 wraps) - F09 - Setting of pallet wrapping height - F13 - F16 - Film tension at base and top wrap / ascent and descent adjustable independently - F17 - F20 - Film pre-stretch at base and top wrap / ascent and descent independently adjustable - F62 - Ergonomic height for film change - Film usage display (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01 - 1 - Cross wrap (up/down) - F01 - 2 - Simple wrap (upwards or downwards only) - F10 - F11 - Wrapping cycle with specified start and stop height - F12 - Wrapping to a preset height (with deactivation of height sensor) - F21 - Wrapping cycle for large pallets - F22 / F23 - Wrapping cycle for top cover film - F29 - Soft-start cycle for application of edge protection - F30 - F31 - Wrapping cycle with reinforcement and adjustable wrap count - Soft-start function to reduce film tears on sharp pallet edges Nwjdpfx Ahsykua Sjcel - Wrapping cycle with manual or motorized rope formation (optional) FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE - Brake manually adjustable via tension roller on carriage - Film specification: max. outer diameter Ø 250 mm - core Ø 76 mm - height = 500 mm - Option: Stretch film with core Ø 50 mm or coreless stretch film - Standard power requirements: 230 V - 1L+N+PE - 50 Hz Options available: - Wrapping height up to 2,400 mm - FILM CARRIAGE TYPE "FE" (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" 200% - FILM CARRIAGE TYPE "PRS" (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE "PS" (POWER STRETCH) 120-400% - Automatic rope formation for reinforced wrapping - Automatic system for cutting film into 3 strips for “BANDEROLL WRAPS” - Machine configuration for temperatures down to -5° C - BATTERIES LITHIUM RELION 2 x 12V - Automatic cutting unit (FE, PRS & PS) Additional machines available from stock Ludwigsburg. Image for reference only.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25MARATHON01, Semi-automatic manual film wrapper MARATHON TECHNICAL DETAILS The world’s only "PATENTED" mobile stretch wrapper that operates without electric drive, capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight, and size Recommended for use with pre-stretched film rolls, maximum roll diameter Ø 230 mm Minimum load dimensions: 650 x 400 mm Minimum load weight: 50 kg Wrapping height (including pallet): 2000 mm Easy operation without reliance on a motor Manual movement by the operator The film carriage is manually raised and lowered The machine features simplified operation Replaces manual wrapping by hand MANUAL WRAPPING OPTIONS The operator is the drive—upwards and downwards wraps are freely selectable FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE with manually adjustable brake roller on the film carriage Nwodpsykuf Iofx Ahcjl Film specifications: Max. outer diameter Ø 230 mm – core Ø 76 mm – height = 500 mm Optional: Stretch film with core Ø50 mm or coreless Additional equipment available from stock in Ludwigsburg.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 200 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 5 700 mm, bendras plotis: 1 710 mm, bendras aukštis: 2 780 mm, darbinė temperatūra: 95 °C, Įranga: aušinimo blokas, Zu verkaufen: Kontinuierlicher Synthesereaktor für organische Verbindungen auf Mikrowellenbasis, gebaut gemäß ATEX-Klasse II – gebraucht, aber in ausgezeichnetem, voll funktionsfähigem Zustand. Ausstattung: Nedpfx Ahevy T Ivecjwl - 3 Rohstofftanks à 100 L - 2 Rührwerke von oben - 1 CIP-Tank - 2 Fertigprodukt-Tanks à 50 L - 3 Pumpen - 1 Mikrowelleneinheit mit 2 Generatoren (2450 MHz), 12 kW Leistung, vollständig EU-sicherheitskonform - Alle medienberührten Werkstoffe: hochwertiger Stahl 1.4404, PTFE, Duran-Glas oder gleichwertig - Hochwertige Komponenten (Tanks, Pumpen etc.), Sensorik und Messtechnik, gefertigt in der EU – vollständige Stückliste verfügbar - PLC-Steuerung (24 V DC) mit spezieller Anwendungssoftware - Dokumentation vorhanden Die Anlage wurde professionell außer Betrieb genommen, auf Paletten gelagert und ist abholbereit. Einzelverkauf von Komponenten (z.B. Tanks oder Pumpen) ebenfalls möglich.

Būklė: naudotas, Gamybos metai: 2018, Apžvalga Ši kompaktiška, automatizuota skardinių užpildymo linija sukomplektuota naudojant pagrindinius komponentus iš KHS, Ferrum, Ska Fabricating ir Atlanta. Linija skirta gėrimų skardinėms gaminti ir apima depaletizavimą, skardinių konvejerių sistemą, plovimą jonizuotu oru, užpildymą, uždarymą bei tolesnį vyniojimą į plėvelę arba susitraukiančią plėvelę. Linijos pagrindą sudaro KHS Innofill Can C užpildymo sistema kartu su Ferrum FC03 skardinių uždarymo mašina. Sistema sujungta pakabinamais ir ant grindų montuojamais skardinių konvejeriais, išdėstyta kompaktiškai gamybos patalpose. Techniniai duomenys - Gamintojas / pagrindinės dalys: KHS / Ferrum / Ska Fabricating / Atlanta - Įrenginio tipas: automatinė skardinių užpildymo linija - Našumas: 15 000 vnt./val. - Užpildymo vožtuvų skaičius: 21 - Uždarymo galvų skaičius: 3 - Tara: 330 ml, 440 ml, 500 ml standartinės skardinės - Pakuotės tipas: atskiros skardinės 12 ir 24 vnt. padėkluose bei WA dėžės - Pagaminimo metai: 2018 - Darbo valandos: 3 446 h - Išdėstymas: kompaktiška užpildymo linija su pakabinamais ir grindiniais transporteriais Nwodpfxsy Tt H Ds Ahcsl Komplektacija - Skardinių depaletizatorius | Ska Fabricating Co. | – | Uždara depaletizavimo sistema su apsauginėmis tvoromis | 2018 - Skardinių transporteris | KHS / AE | – | Pakabinamų ir ant grindų montuojamų konvejerių tinklas tuščioms skardinėms ir perėjimui tarp linijų | 2018 - Jonizuoto oro plovimo įrenginys | Ska Fabricating Co. | AV-C500 | Plovimo/valymo modulis tuščioms skardinėms prieš užpildant | 2018 - Skardinių užpildymo įrenginys | KHS | Innofill Can C | Automatinė skardinių užpildymo sistema | 2018 - Užpildymo lygio tikrinimo įrenginys | Heuft | - - Skardinių uždarymo įrenginys | Ferrum | FC03 | Rotacinė skardinių uždarymo mašina | 2018 - Skardinių džiovintuvas | Air Control Industries | 2018 - Etiketavimo mašina | Pack Leader Advanced Dynamics | Pro-516 | Etiketavimo mašina su ritininio padavimo funkcija | 2018 - Kartoninių pakuočių formavimo įrenginys | Atlanta | Rafaello 726 | Pakavimo sistema | 2018 - Kartoninių pakuočių spausdintuvas | SATO | S86-EX | 2018

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks Nwedpfoyktrtsx Ahcel MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Būklė: naudotas, bendras ilgis: 3 700 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 700 mm, Spalva: Pilka Svoris: 4.500 kg Nedpfx Aoymbhzohcjwl - Dokumentacija prieinama: Taip - CE sertifikatas: Ne - Valdymas: Konvencinis - Pavaros tipas: Hidraulinis - Galia [kW]: 7,5 - Maks. lakšto storis [mm]: 6 - Maks. darbinis plotis [mm]: 3050 - Atstūmimo tipas: Elektrinis - Atstūmimo gylis [mm]: 750 - Lakšto atraminė sistema: Nėra - Pirštų apsauga: Fiksuota - Kampo reguliavimas: Varikliu valdomas - Pjovimo tarpo reguliavimas: Rankinis - Stalo tipas: Standartinis stalas - Transportavimo matmenys: 3700 mm x 1600 mm x 1700 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 4500 kg - Transporto pakuočių kiekis [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/sandorio apmokestinimas: PVM gali būti atskaitomas verslui Pristatymas ir keitimas galimi bet kuriuo metu visoms pramonės sritims Lukas van Rossum