Padėklų vyniotuvas Sukamasis stalas

ATLANTA - 25mm flacher Drehteller SYNTHESI - 200% Vorreckung

Demonstration machine, as new.

SYNTHESI with a flat turntable
Turntable height: 25 mm
Short ramp: 500 mm long

Manual rope formation at the pallet, mounted to the frame, for reinforcement of the wrapping

TECHNICAL DETAILS:
Turntable LOW PROFILE
· Height: 25 mm
· Max. pallet dimensions: 1000 x 1200 mm
· Max. load capacity: 1200 kg
· One ramp included
Godpfez Ipnhjx Apyjuh

Wrapping height (including pallet): 2,200 mm
Height sensing via photoelectric sensor
Frequency-controlled turntable drive (soft start - start/stop)
Frequency-controlled carriage speed, independent adjustment for up and down movement
Acoustic signal at start of wrapping and end of cycle
Emergency stop switch according to CE regulations
Turntable always stops at the same start position
Anti-fall protection for the film carriage
Push buttons for machine power, start & stop function, and reset according to CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON CONTROL PANEL
All functional parameters adjustable via display
F00 – Display lock for program modification
F02 – Infinitely variable turntable speed 5–12 rpm
Carriage speed upward and downward independently adjustable
F03 – Carriage speed upward: 1.3 to 5.4 m/min
F04 – Carriage speed downward: 1.3 to 5.4 m/min
F05 – Number of wraps at pallet foot (1–10 wraps)
F06 – Number of wraps at pallet top (1–10 wraps)
F09 – Photoelectric sensor delay for wrapping height
F13–F16 – Film tension for foot & head wrapping / upward & downward individually adjustable
F62 – Ergonomic height for film change
Film consumption display (optional)

ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL
6 storable wrapping programs
F01–1 – Cross wrapping (up/down)
F01–2 – Single wrapping (only up or only down)
F01–3 – Push button for manual functions
F10–F11 – Wrapping cycle with specified start and stop height
F12 – Wrapping to a preset height (with photoelectric height sensor deactivated)
F22 / F23 – Wrapping cycle for top sheet application
F29 – Soft start cycle for attaching edge protection
F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps
Soft start to reduce film tearing on sharp pallet edges
Wrapping cycle with manual or motor-driven rope formation (optional)
Reinforcement cycle activated by push button

FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH”
Film pre-stretch ratio set to 200%
Film lay-on tension electronically controlled via control unit
Film specifications: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm
Standard connection data: 230 V – 1PH+N+PE – 50/60 Hz
Total power: 1.2 kW / 8A
Optional: Sprocket for OPRS pre-stretch ratio 150% / 250% / 300% possible

Additional systems available from Ludwigsburg stock.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.