Injection molding machine

Arburg 820S 4000-2100 Nr 195746

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Technical Data: Maximum clamping force: 3500 kN Maximum locking force: 3850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping plate (h x v): 1168 x 1144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Cedpfey Hmfysx Apaori Maximum mould weight: 6600 kg Maximum weight on moving clamping plate: 3800 kg Maximum weight on fixed clamping plate: 5100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Ejector maximum speed: 270 mm Screw diameter: 60 mm Injection pressure: 2426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle travel: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed barrel heating: 23.1 kW Material hopper capacity: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year: 2023 Stroke: 2000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1800 mm Robot console on fixed clamping plate Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: Special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle, without mixing element and without check valve; • Interface (communication, emergency stop interface); • Software with function overview pages for MuCell control; • Adapted nozzle space guard; • High-speed servo-controlled screw (analog ZE388) Conveyor: Width: 870 mm Usable width: 800 mm Length: 3500 mm Height: 880–1220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Tunnel clearance height: 500 mm This injection moulding machine is fully equipped! Condition: As new, only 5,290 operating hours.

Būklė: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 95 239 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 173937, spaudimo jėga: 2 000 kN, varžto skersmuo: 55 mm, tarpas tarp stulpų: 520 mm, formos aukštis (min.): 250 mm, bendras ilgis: 5 100 mm, bendras plotis: 1 800 mm, bendras aukštis: 2 200 mm, bendras svoris: 6 630 kg, Įranga: dokumentacija / vadovas, The machine was operating flawlessly up until the day before the arrival of the new machine. Therefore, it is in good used condition. The machine is being sold due to lack of space in the injection molding area and is no longer powered. The pump, injection unit, and clamping unit are all leak-free. The machine manual is available, and videos of the machine are available on request. Pump operating hours: 95,239 Automatic operating hours: 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating Crjdjv D Nxlepfx Apaji - 12/2022: Ejector sealed. Injection unit sealed, including new piston

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Loading, unloading, drive-in, mobile ramp 25T Ramp, 2.5M Wide TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: Manufacturer: TM-GROUP Maximum load capacity: 25 tons Internal ramp width: 2500 mm Ramp railings on both sides Ramp wheels for easy movement Central ramp handle for shifting with a forklift Adjustable inclination angle and flap height Lubricated moving parts Equipped with a winch Custom ramp sizes available for an additional charge Crsdperp Ekfofx Apaoi Height adjustment with motor (optional) ! ATTENTION: CHOOSE THE WIDTH OF THE HOPPER BASED ON THE MINIMUM EFFECTIVE WIDTH REQUIRED! ✅ Ramp grating – galvanized grating with anti-slip grooves: Safe and stable surface. Provides optimal grip and support for forklift and pedestrian traffic. The grating is galvanized and can be disassembled. ✅ Forklift handle – mountable on both sides: Convenient and fast attachment for forklift transport allows you to move the ramp in every direction. The specially designed handle enables maneuvering even in confined spaces. ✅ Chain for connection to a truck, wagon, or fixed warehouse ramp: Robust steel chain provides additional security, preventing the ramp from shifting during loading and unloading operations. ✅ Sturdy side railings: Protective railings with the option for removal and installation of a frame/roof (roof is optional). ✅ Electric height control of the ramp: Smooth electro-hydraulic drive utilizes a high-performance pump. The pump requires 230V and can therefore be powered from a standard outlet. ✅ Double-sided hand pump: Hydraulic pump for height adjustment in case there is no access to electro-hydraulic power supply—double lifting feature. This is an excellent solution for working in all conditions. ⭐️ We offer the following variants: ⭐️ - Drive-on widths of 1900 – 2000 mm, 2150 mm, and 2500 mm PREMIUM. - Mobile ramps in load capacities of 10 tons, 15 tons, 20 tons, and 25 tons PREMIUM. - Track thickness 3 – 5 cm. - Colors: red, blue, and black. - Mobile ramp with tarpaulin cover.

Būklė: naujas, Gamybos metai: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85° Lower tools: 50, 35, 22, 16 Frame gap (B): 2550 mm Approach speed: 130 mm/s Working speed: 8 mm/s Return speed: 120 mm/s Crowning: Manual (CNC motorised version available at extra cost) X-axis travel: 750 mm X-axis speed: 250 mm/s Back gauge fingers: 2 pcs Front support arms: 2 pcs Hydraulic tank capacity: 180 litres Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Throat depth (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X), optionally expandable with R+Z axes Eurostamp 2067 lower tools (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85° Narrow table All-steel welded construction Promecam quick-release clamping system CNC-controlled motorised back gauge (X: 750 mm) Cjdegu N Alopfx Apaori Adjustable back gauge fingers Metric and inch system selectable Ground and chrome-plated cylinders Swivelling control panel Foot pedal operation with anti-panic stop & emergency shutdown Side guards (secured with limit switches) Light curtain at the rear of the machine (900 mm) DSP laser finger protection system at the front (CE-compliant) BOSCH/REXROTH or HOERBIGER/HAWE hydraulics, BOSCH/REXROTH or ECKERLE hydraulic pump Sliding front support arms (2 pcs) Electrical components by: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Paint finish: RAL 7035, RAL 5015 Optional accessories available at extra cost: - CNC-controlled R-axis (250 mm) - CNC-motorised crowning - Servo drive motors for back gauge system for X+R axis (Mitsubishi) - Custom paint finish on request Documentation in German or English CE conformity

Gamybos metai: 1998, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12254 B521 860, bridge crane ±10,500 mm x 12,500 kg Crodpjv Ip Egjfx Apaei

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2007, Funkcionalumas: neveikiantis, For sale is an injection molding machine by Netstal, model Synergy 1000-230. Due to a transport accident, the control cabinet is completely defective. For this reason, the machine is offered as a source of spare parts or for repair. The machine was fully operational and in good condition prior to the incident. Technical data: - Operating pressure: 210 bar - Injection force: 182 kN - Clamping force: 1000 kN - Opening stroke: 0–400 mm - Mold installation height: 450–750 mm - Total weight: 7,200 kg - Operating hours: approx. 53,000 Available from March 2024 Initial hydraulic oil fillings can be ordered from us. On request and for an additional fee, loading and transport (throughout Europe) can be organized. Prices plus VAT. Cedsrfbnmopfx Apaeri Inspection possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sale BUYING/SELLING PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for high-quality yet affordable metalworking machinery for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Gamybos metai: 2007, būklė: geras (naudotas), Naudotas 4,4 kW Bystronic Byspeed CNC lazeris pardavimui Naudoti Bystronic 4,4 kW lazeriai pardavimui VIDEO ŽEMIAU: Byspeed 3015 4,4 kW Pagaminimo metai: 2007 Gamintojas: Bystronic Modelis: Byspeed 3015 Lakšto dydis: 3 metrai x 1,5 metro / 3000 mm x 1500 mm Lazerio galia: 4,4 kW / 4400 W Valdymas: ByVision CNC02 Automatika: netaikoma Metai: 2007 Būklė: gera, dirba tvarkingai, prižiūrėtas nuo naujo Byspeed 3015 4400 W 2010 m. kovas Csdpfxsgwa Swe Apaori Darbo valandos: 44 189 val. Pjovimo valandos: 20 490 val. Geros būklės įrenginys, nuo naujo aptarnautas Bystronic UK paslaugų sutartimi. Komplekte: - Bypos automatinis fokusavimas - CutControl - 2 pjovimo galvos - Įrankiai ir priedai - Torit dulkių surinktuvu Pristatymas, montavimas ir apmokymai galimi už papildomą mokestį.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2006, veikimo valandos: 33 107 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Aukščiausios klasės įranga, pagaminta švariose patalpose (farmacinė pramonė) Supratę, galime parodyti įrenginį veikiantį. Techniniai duomenys: Gamintojas: Engel Tipas: V 330H/80V/130 Combi, 2 spalvų, su besisukančiu padėklu Serijos numeris: 162036 Pagaminimo metai: 2006 Veikimo valandos: 33 107 val. Valdiklis: CC 200 Papildoma įranga: - su besisukančiu padėklu, 820 mm skersmuo - su GEKU robotu SR 500 ST, x=600, y=1400, z=2500 mm - tik 33 107 veikimo valandos - apsauginis korpusas / apsauginė narvo konstrukcija - horizontalus konvejeris - minimalūs dažų pažeidimai / beveik kaip naujas - visiškai veikianti Matmenys (ilgis/plotis/aukštis): žiūrėkite brėžinį Svoris: 10 600 kg Veikimo būklė: puiki Būklė: puiki Užspaudimo blokas Užspaudimo tipas: hidraulinis Užspaudimo jėga: 1300 kN / 130 tonų Atstumas tarp kolonų: be kolonų Atidarymo eiga: 606 mm Įrankių montavimo aukštis: 250 mm Centravimas: 125 mm Maksimalus plokštelės atstumas: 850 mm Plokštelės dydis: 750 mm / 850 mm (plotis x aukštis) Injekcinis blokas, 2 komponentai Sraigtas, skersmuo: 25 / 22 mm Injekcijos svoris: 72 / 35 g Injekcijos slėgis: 2391 / 2066 bar Injekcijos tūris: 79 / 38 cm³ Išstumimo eiga / jėga: 61 kN / 100 mm GEKU roboto detalės SR 500 ST Valdiklis: Simotion Credpfjub Umqex Apaoi X ašis: 600 mm Y ašis: 1400 mm (vertikali) Z ašis: 2500 mm (horizontali) A ašis (sulenkimo): SWM 45 C ašis: servo Griebtuvas: SWS16 B ašis: nėra Įranga yra mūsų sandėlyje Hanoverio mieste, Vokietijoje, ir gali būti nedelsiant pristatyta. Ji buvo išbandyta. Garantija: Garantija galioja iki pirmojo paleidimo. Pakavimas / siuntimas: Nemokamas pakavimas į pirkėjo sunkvežimį arba nemokamas pristatymas į namus, atlyginant transporto išlaidas / pristatymas į bet kurį pasaulio kampelį yra įmanomas iš mūsų sandėlio Hanoverio mieste, Vokietijoje. Finansavimas: pagal užklausą – įmanoma nuomos-pirkimo schema. Kaina: pagal užklausą.

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 113 kW (153,64 AG), aušinimo tipas: vanduo, bendras svoris: 943 kg, bendras plotis: 2 100 mm, bendras ilgis: 2 270 mm, bendras aukštis: 1 330 mm, šildymo galia: 117 kW (159,08 AG), Įranga: kompresorius, Naudotas Carrier 30 RQS 120 oro aušinamas šilumos siurblys / aušintuvas su R410A šaltnešiu. Komplektuojamas su 3 Copeland ZP182KQE-TFD-604 slenkamųjų kompresorių, sustiprintu šilumokaičiu, Carrier PM 100-110mm ventiliatoriumi - 50 Hz - 0,53/0,18 kW - 720/500 aps/min, Mecasem OOPSG001171100C imtuvu, kurio talpa 23,5 litro, ir elektronine valdymo spinta su Carrier Pro-Dialog+ ekranu. Specifikacijos Markė: Carrier Tipas: 30 RQS 120 Produktas: Vandens aušintuvas / Šilumos siurblys Šaltnešis: R410A Svoris: 943 kg Matmenys: 2270x2100x1330 mm (I x P x A) Kompresoriai: 3 Copeland ZP182KQE-TFD-604 Ekranas: Carrier Pro-Dialog+ Ventiliatorių skaičius: 2 Ventiliatorių specifikacija: 50 Hz - 0,53/0,18 kW - 720/500 aps/min Pagaminimo metai: 2013 Kiekis sandėlyje: 1 Crodpfx Aporlk E Njaji

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, veikimo valandos: 6 200 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 200 kN, varžto skersmuo: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons of clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras: 8 hot runner zones. 2 cores on the fixed platen, 2 cores on the moving platen. 1 pneumatic valve on the moving platen. The injection molding machine is delivered RE-Conditioned by the UK Transitus expert technical team. Commissioning at the customer's site can be offered, ensuring proper operation upon installation completion. Technical Details Cjdpswq D Efofx Apaeri SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ INJECTION WEIGHT: 1126 g MAX. DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm DISTANCE BETWEEN TIE BARS: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282