Arburg 375V 500-100 besisukantis stalas (2019)

Arburg 375V 500-100 Drehtisch

Būklė: naudotas, Gamybos metai: 1989, veikimo valandos: 74 900 h, spaudimo jėga: 850 kN, varžto skersmuo: 40 mm, bendras svoris: 3 700 kg, Machine No. 145464 Cedpfxjr Hrqre Aahjpw Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Host computer, handling, air blast, sorting gate, hydraulic core pull 1, mold temperature control 3 zones. The following accessories etc. are included with the machine: Complete 50 mm thermoplastic injection unit, sorting gate, hydraulic infeed conveyor (height-adjustable in 3 steps, integrated into the control), external disk drive (Arburg original), documentation and machine service reports from Arburg, machine setup course documentation (folder), electrical schematic, documents also available in digital form, oil filling (must be pumped into a container prior to transport—pump is included), electronic water manifold.

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), air-cooled process chiller: refrigerant R32 Codpef H A Eyofx Aahjpw Cooling capacity 72 kW at 7/12°C, integrated P3 pump, built-in 410 l tank, winter package for outdoor installation down to -25°C ambient temperature, including speed-controlled fans large Dixell display with protective cover,

Gamybos metai: 1987, būklė: paruoštas naudoti (naudotas), Uždarymo jėga: 220 kN, min. įrankio aukštis: 200 mm, maks. atidarymo eiga: 200 mm, maks. plokščių atstumas: 400 mm, išstūmėjo eiga: 80 mm, staklių matmenys (I/P/A): apie 2600 mm/800 mm/1600 mm, svoris: apie 760 kg. Apžiūra vietoje galima. Cjdpfjw R Dg Uox Aahepw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 53 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 206432, spaudimo jėga: 2 000 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 570 mm, darbinio tūrio: 392 cm³, įpurškimo slėgis: 2 000 juosta, išstūmimo eiga: 225 mm, bendras svoris: 7 450 kg, Įranga: dokumentacija / vadovas, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines built from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current information – Tax notice and advantage for used machinery: From 01.07.2025, used machines can also benefit from a special depreciation of 30% per year for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (LxWxH): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well maintained – German origin Extras: - Complete 50 mm highly wear-resistant thermoplastic cylinder - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with two variable delivery pumps - GOLDEN EDITION anniversary model - Thermoplastic processing - 50 mm open nozzle - Extended 50 mm nozzle tip - Heating band for open nozzle - Heating band for extended nozzle tip - 570 central clamping plate configuration, ⌀ 125 mm - Two air-blast units with pressure regulator - Connection for air-blast unit 1 - Connection for separating unit - Core pull 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Interface for robot system (EUROMAP 67), 50-pin - Interface for ARBURG host computer - Socket distributor: 1 CEE, 1 Schuko additional - Serial printer interface USB - CompactFlash interface for data storage - Operator authorisation via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for colouring unit - Manual adjustment for free cooling circuits - Machine-specific cooling circuits controlled - Equipment package: advanced monitoring - Equipment package: extended movement - Equipment package: production control - Equipment package: optimisation / operator assistance - Equipment package: quality assurance - Equipment package: documentation Complete documentation available Injection unit: Screw diameter: 50 mm Injection weight: 359 g/PS Injection pressure: 2000 bar Injection volume: 392 cm³ Clamping unit: Cjdjw Tt R Ispfx Aahjpw Clamping force: 200 t / 2000 kN Tie-bar clearance: 570 x 570 mm Mounting plates: 795 x 795 mm Tool installation height: 300 mm Max. plate distance: 950 mm Opening stroke: 650 mm Ejector stroke/force: 225 mm / 66 kN Clamping system: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany, and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Free loaded onto the buyer’s truck, or free house delivery for transport reimbursement, available ex stock Hannover, Germany A summary of our machines and company: - We only sell machines we have purchased from ongoing production, available from our warehouse in Hannover - All machines are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers trading with third-party property - All machines come from successful companies that have given them proper maintenance and care - All machines offered can be viewed at our warehouse

Būklė: geras (naudotas), Gamybos metai: 2003, veikimo valandos: 106 864 h, spaudimo jėga: 1 300 kN, varžto skersmuo: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on time. Good condition, fully operational Still in use until calendar week 11 Additional service reports and documentation available Technical specifications: Year of manufacture: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve at the injection unit for especially high dynamics and reproducibility of the injection process, back pressure is regulated, nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic power optimization and corresponding energy savings through stepless adjustment of the pump drive speed to meet the required power demand of the injection cycle Codpforp Dyrjx Aahepw - VE 460/00 ED electromechanical dosing drive via a speed-controlled three-phase asynchronous motor for increased productivity through simultaneous movement, gentler material preparation, and corresponding energy savings compared to hydraulic dosing Upon request and at an additional cost, loading and transport (Europe-wide) can be organized. Prices plus VAT Inspection by appointment possible. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Arburg 1200 T 2000-800 (vertikali mašina su 1200 mm besisukančiu stalu) Uždarymo vienetas 2000T Stalo skersmuo: 1200 mm Kampinis pasukimas: 180 laipsnių Cpjdpowugczsfx Aahsw Uždarymo jėga: 200 tonų Atidarymo jėga maks.: 115/500 kN/mm Įpurškimo vienetas Sraigto skersmuo: 45 mm Įpurškimo tūris: 318 cm³ Įpurškimo svoris: 291 g Įpurškimo slėgis: 2470 bar 1. Modelis: T-modelis 2. Mašinos tipas: 1200 T 2000 - 800 3. Plastifikavimo vienetas: aukštai atsparus dėvėjimuisi termoplastinis cilindras, 45 mm 4. Sraigtas: sustiprinta sraigto jungtis su pleišto formos jungties geometrija 5. Valdymas: SELOGICA 'direct' valdymas 6. Technologijos lygis: 2 lygio servovarikliu valdomas su 2 reguliuojamomis siurbliais 7. Besisukantis stalas: specialios ergonomiškos konstrukcijos, dviejų pakopų, 180° pirmyn/atgal kintamasis 8. Purkštukai: atvira 45 mm purkštukas su purkštuko antgaliu 9. Formoje montuojami adatiniai purkštukai: elektra valdomi &

Būklė: geras (naudotas), Gamybos metai: 2006, spaudimo jėga: 800 kN, Totale aansluitwaarde 21,7 kW Cpodpfx Aasvu Dncehow Pompmotor 18,50 kW Gewicht 7.400 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Boy 30 T2 Schließkraft: 30 Tonnen Baujahr: 1992 Schnecke: 32 mm Cpedpouh U Izjfx Aahsw Einspritzgewicht: 123 g

Būklė: naujas, 1 brand new semi-automatic high-performance horizontal bandsaw with double-column guide and 2° cutting inclination to the table support surface Make: HUVEMA - BEKA MAK Model: BMSY 560 C Technical Data: Cutting capacity 90° rectangular: 560 x 750 mm Cutting capacity 90° round: 560 mm Cutting capacity 90° square: 560 mm Cutting capacity 45° rectangular: 410 x 560 mm Cutting capacity 45° round: 560 mm Cutting capacity 45° square: 560 mm Blade dimensions: 6000 x 41 x 1.3 mm Infinitely variable blade speed: 20-100 m/min Motor power: 4 kW Machine dimensions (L x W x H): 3400 x 1000 x 2050 mm Machine weight: 2045 kg Equipment / Special Features: • Semi-automatic double-column bandsaw • Linear guides • 2° cutting angle to the table support surface • Infinitely variable cutting speed via potentiometer on the control panel Cjdpfx Asbw H T Doahjpw • Hydraulic vice • Hydraulic-mechanical saw blade tensioning • Powerful drive motor • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant device • Infeed roller conveyor, 1200 mm • Chip brush • 1 pc. bi-metal bandsaw blade • Control panel • CE compliant Delivery time: approx. 8 weeks after receipt of order Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, spaudimo jėga: 500 kN, įpurškimo slėgis: 2,2 juosta, For sale is an injection moulding machine from Arburg, model 320 S 500-150. The machine is fully functional. Technical data: - Clamping force: 500 kN - Distance between tie bars: 320 mm x 320 mm - Mould height: 225-350 mm - Size of mounting platen: 445 mm x 445 mm - Maximum opening stroke of platen: 550 mm - Screw diameter: 30 mm - Injection pressure: 2,200 bar - Weight: 2,250 kg Upon request and for an additional charge, we can organise disassembly, loading, and transport throughout Europe for you. Cpsdpfxeqmn Egs Aahjw All prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange welcome! Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.