Horizontalios juostinės pjovimo staklės

HUVEMA - BEKA MAK BMSY 560 C

Sąlyga: naujas, Gamybos metai: 2023, Highly efficient series production Clamping – Enter cutting size – Start. Automatic saws with loading systems are a standard for efficient series processing of bar and bundle material. Maximum cutting range up to 290 x 320 mm. Features - Automatic hydraulic sawing machine with NC control - For cuts from 0° to 60° right, compliant with all CE safety standards - The machine features 9 programs, each consisting of up to 99 individual steps, totaling approximately 890 cutting positions, with a corresponding piece counter - Functions: Material feed, closing of the fixed vice, blade rotation, distribution of emulsifiable coolant, bow descent until the end of the cut, return of the feed carriage to the set position, bow reset, and blade rotation stop via coolant distribution, cycle repetition Hsdpfx Agjfww Sqsiji - Hydraulic feed, cut by cut, with no longitudinal dimension limit - Numerical control of quantity and cut length - Hydraulic control panel with adjustable cutting pressure - Blade tension is monitored electromechanically via microswitch - Device with brush for band cleaning - Bimetallic band 3200 x 27 x 0.9 mm - Cutting thickness 1.2 mm - Material feed stroke: 600 mm - Hydraulic power unit motor: 0.75 kW - Electric pump: 0.09 kW for blade cooling You are welcome to inspect the system at any time in our production/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH

Sąlyga: naudotas, Gamybos metai: 2016, Operating hours (machine): 5,320 h Max. feed width: 300 mm Processable sheet thickness: 1–15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Feed speed, stepless: 0–2 m/min Length: 2,600 mm Width: 2,300 mm Height: 1,300 mm Machine weight: 1,900 kg Standard equipment Hjdpfxjv N I Hls Agioi - Equipped with a vacuum table for processing steel, stainless steel, and aluminium for part sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming flipping and reworking of parts is eliminated - By folding away the innovative turning station, parts with an edge length of more than 200 mm can also be processed on one side - High degree of automation enables economical and reliable processing even for large quantities of parts - High and consistent processing quality - Dry processing (no chemical additives necessary as with vibratory finishing) - Small parts are discharged on the infeed side into a collection box - No additional walking distances for the operator - Energy efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and easy tool changes - Simple and intuitive machine operation - Modern, compact machine design Additional equipment Extraction unit: Lissmac DDE 1500

Sąlyga: naudotas, Gamybos metai: 2013, Technical details: Turning diameter: 38 mm Item: CNC lathe Manufacturer: Hanwha Model: STL38H Year of manufacture: 2013 Control: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increment; Z1 travel 320 mm; synchronized guide bushing unit; guide bushing type JBS or SL38; collet type 173E / F48 Sub spindle: Hsdpfx Aetv Sdfogiji Max. pickup diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increment; Z2 travel 320 mm; collet type 171E / F42 Tool turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Please contact us for further information and pictures via email (at) or

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: Hodjf Sqckspfx Agiji - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Sąlyga: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off Hedpsd Iipmofx Agiei 5. Raise frame just above the material 6. Vice opens

Sąlyga: naudotas, Combined Section Steel Shear and Punch GEKA Type HYD 80 / Hydracrop 80/A Machine No. 9566 Year of manufacture approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Hsdpsrz Tutjfx Agioi Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Stop with electric stroke release, 500 mm - Worktable with stop at punching station: 550 x 380 mm - Working height at punching station: 1100 mm - Worktable with stop at rectangular notcher: 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 assorted punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2006, Technical Data Brand: KENT Model: VK 1600MC Year: 2006 Serial Number: 2200139 CNC Controller: FANUC 18 iMD Location: Tabaza (Asturias, Spain) Table Dimensions Table Surface: 1700 x 810 mm T-slots: 22 x 5 x 160 mm Maximum Table Load: 2,000 kg Travel Longitudinal Travel X: 1600 mm Cross Travel Y: 815 mm Vertical Travel Z: 815 mm Spindle Nose to Table Distance: 220 ~ 1035 mm Spindle Nose to Column Distance: 865 mm Spindle Taper: BT50 Spindle Speed: 30 – 6,000 rpm ZF Gear Change (2 speeds): Yes Maximum Tool Weight: 15 kg Maximum Tool Size (Diameter x Length): 125 x 300 mm Hedpfoqwyzfsx Agiei ATC (Automatic Tool Changer) Maximum Tool Size: Ø125 x L250 Maximum Tool Weight: 15 kg Number of Tools: 32 Feed Rates Working Feedrate: 1 – 10,000 mm/min Rapid Traverse Rates (X / Y / Z): 18 / 18 / 18 mm/min Motor Main Spindle Motor (30 max. power): 15 / 18.5 kW Axis Drive (X, Y, Z): X: 5.5 | Y: 5.5 | Z: 5.5 Coolant Pump CTS: One air & two coolant pumps – 4 bar + 6 bar / 20 bar Weight and Dimensions Machine Weight: 16,150 kg Machine Dimensions: 4,488 x 3,448 x 3,250 mm Footprint: 5,000 x 3,500 mm.

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) Hsdpfxjd N H A Ns Agiei - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Hedpfscubatjx Agiji Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Gamybos metai: 1993, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Hedpfx Aecc D Ddjgiji Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.