Savaime išsivalantis maišinis filtras, 50 000 m³/h

AIRMACHINERY AF-50X

Gamybos metai: 2024, Sąlyga: naujas, LITech jaw crushers are ideally suited for the pre-crushing of extremely hard, medium-hard, tough, and brittle materials such as construction debris, bentonite, soils, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous metals, slag, and many more! Knjdpog Ay Aysfx Afpjd

Sąlyga: naudotas, Gamybos metai: 1972, Swing diameter over bed: 400 mm Swing diameter over cross slide: 220 mm Turning length: 1000 mm Spindle speeds: 12.5 - 2000 rpm Spindle mount: Bayonet 55022 Spindle bore: 47 mm Feeds – longitudinal: 0.07 - 4.16 mm/rev Feeds – cross: 0.035 - 2.08 mm/rev Thread cutting – metric pitch: mm Thread cutting – inch: 2 - 24 TPI Rapid traverse – longitudinal/cross: 3.4 / 1.7 m/min Spindle motor: 11 kW Drive power: 13 kW Machine weight approx.: 2.8 t Space requirement approx.: 2.8 x 1.2 x 1.5 m Knedpfevzhhysx Afpsd 3-jaw chuck Ø 250 mm 4-jaw chuck Ø 200 mm Two-axis digital readout ANILAM WIZARD LATHE – retrofitted in 1992

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, 6-axis industrial robot ABB IRB6640-205/2.75 Year of manufacture: 2012 Includes connection cables, teach pendant, IRC5 control cabinet, and robot arm. We have many other industrial robots in stock. Knodpfx Afsixqn Toped

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, 6-axis industrial robot ABB IRB6640-235/2.55 Year of manufacture: 2011 Comes with teach pendant, IRC5 controller, connection cables, robot arm Knodpfx Afjixqhuoped We have additional robots in stock, mainly from KUKA and ABB.

Sąlyga: naudotas, Plant: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on the medium Design: Robust, high-performance construction Material: Stainless steel (VA) on container frame, 30' container, scraper plates: made of PP Kjdpfxeppyhtj Afpjnd Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Operating Principle: The wastewater is fed to the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates inside the clarifier, the water is redirected below the lamellas and then flows upwards through the plates. As a result, solids settle onto the lamellas and the clarified water is directed to the outlet. The solids gradually slide down along the lamella plates, where the sludge funnel is located. Rake Mechanism: Optionally, we offer the inclined clarifier equipped with a rake mechanism, which keeps the sludge in a flowable condition. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. By pre-thickening thin sludge, the filter press can be designed with a smaller filter area. The plant is in good condition and is available for rental or purchase. An inspection at our facility can be arranged by appointment. We also offer new inclined clarifiers with a lead time of approx. 8 to 10 weeks!

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 26 920 h, IRB 6640-235/2.55 Year of manufacture: 2011 Kodpfx Aoim Si Aofpsnd We are also pleased to offer this robot fully reconditioned upon request! For further information, please do not hesitate to contact us!

Gamybos metai: 1986, Sąlyga: visiškai atnaujintas (naudotas), Chamber filter press, completely overhauled with stainless steel lining, 82 polypropylene (food-grade) filter plates, 30 mm cake thickness, press volume approx. 1,100 liters, filtration area 96 m², fitted with new filter cloths, maximum feed pressure up to 15 bar possible, closed discharge via 2 diagonal corner bores, automatic plate shifting and filter cloth washing system in stainless steel, high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with elevated base frame (stainless steel), control cabinet. Knedpfx Asn Dw Nkefpod

Gamybos metai: 2024, Sąlyga: naujas, LITech jaw crushers are ideally suited for the pre-crushing of extremely hard, medium-hard, tough, and brittle materials such as construction debris, bentonite, soils, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous metals, slag, and many more! Kedpfx Ajga Nfcofpjnd

Sąlyga: naudotas, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle arrangement: - Bottom 5.5 kW - Right + Left 11 kW - Top 7.5 kW - Universal 5.5 kW Each spindle with individual motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller in the table Kedpfomiik Tsx Afpjnd Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via cardan shafts Table lubrication pump Pressure: 6 atm Electric body lifting Power supply: 400 V Overall dimensions: Length: 4240 mm Width: 1550 mm Height: 1560 mm

Sąlyga: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles Knsdpfx Asgwbbqjfpjd No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)