Suvirinimo dūmų ištraukimo įrenginiai pirkti naudotą (153)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 3 934 h, siurbimo galia: 18 000 m³/val, neigiamas slėgis: 2 000 Pa, Filter Ventilation Tower IVAT Air Tower 18000K Industrial hall filter ventilation for welding facilities—numerous technological processes in manufacturing plants, primarily in metalworking. Top-side air intake and draft-free bottom-side air discharge—directly to workstations. Layered filter ventilation principle, device does not require ductwork installation. Cartridge filter elements—self-cleaning by compressed air pulse during operation. Filter cleaning via differential pressure—no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from above, filtered, then discharged at floor level as clean, breathable air without generating drafts, at speeds below 1.2 m/s. Precisely where workers breathe. And across a wide 270-degree range. The tower operates according to the layered ventilation principle, recommended by trade associations and considered the best type of air circulation. Year of manufacture: 2018 Operating hours: 3,934 Parameters: - Fan power: 11 kW with frequency inverter - Airflow rate: 18,000 m³/h - Filtration surface area: 150 m² - 6 cartridge filter elements - Very quiet operation - Filtration efficiency: >99.9% Equipment: - IVAT Power Package 11-18.5 (Siemens frequency inverter) - IVAT device control in-room (fully automatic) - IVAT Temperature Control (monitoring and control) - IVAT Spark fire protection (spark and fire sensors in the tower) - IVAT Industrie-Energie4.0 (Siemens PLC + remote maintenance via Ethernet + full graphic display + connection to control center, fire alarm + energy management) Dimensions: - Width: 1,900 mm - Depth: 1,530 mm - Height: 3,600 mm Hpedpotrwzwefx Ad Dsa

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 190100219, Techniniai duomenys: - Stacionarūs kasetiniai filtrai su filtro stebėjimu - Valymo būdas – pneumatiniai sukamieji antgaliai - Ištrauktas ir išvalytas oras grąžinamas atgal į darbo erdvę Hjdpfx Adjxqpg Ss Dspa - Sienoje montuojamas variantas su dviem lankstomais ištraukimo svirčiais - Lankstomos ištraukimo svirties ilgis: apie 7 m - Oro srautas: apie 1 400 m³/val. - Ventiliatoriaus našumas: apie 3 000 m³/val. - Dulkių surinkimo talpa: 11 l - Pneumatinė jungtis - Pavara – ventiliatorius: 400 V / 1,5 kW - Svoris apie 300 kg

Sąlyga: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Airtower, bendras svoris: 1 480 kg, bendras plotis: 1 756 mm, bendras aukštis: 3 643 mm, Ventiliatoriaus galia: 3 x 3,9 kW Hodov N U Tlepfx Ad Djpa Variklis: 400V 50Hz Svoris: 1.480 kg Pagaminimo metai: 2017 Darbo valandos: 14 783 h Yra 2 identiški Airtower, kaina - už vienetą.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 18133-00 12632868, įėjimo įtampa: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Hjdpew Hw Dgefx Ad Djpa

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 30/30, Camfil Hepa oro filtrai 30/30, 6 vnt. dėžutėje. Gamintojas: Camfil LTD Modelis: 30/30-16202nomsp616 Vieneto matmenys: 508 x 406 x 50 mm Hsdsxp H I Rjpfx Ad Depa Parduodama partija iš 20 dėžių.

Sąlyga: geras (naudotas), Manufacturer: Fume Extractor Top filter: 280 x 280 x 20 mm Hodpoduiu Sefx Ad Dspa Middle filter: 270 x 270 x 230 mm Bottom filter: 280 x 280 x 30 mm Filter chamber: 360 x 360 x 270 mm Connection diameter: 45 mm Power: Connection: Accessories/Equipment: mobile (on casters) Condition: good Weight: 0.1 t Dimensions: 400 x 630 x 750 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, negative pressure unit suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Hedpfx Adoiypxij Depa The filter is pneumatically cleaned by pulses of compressed air during operation, ensuring high device efficiency. The unit is equipped with a pre-separator and a mechanical spark arrester. The fan is positioned on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of manufacture: 2012 Filtration cartridges: Donaldson Torit Ultra WEB – 12 pcs Filtration surface area: 215 m² Fan power: 18.5 kW Capacity: 11,000 m³/h Negative pressure: 3,900 Pa Inlet diameter: 500 mm New filtration cartridges tailored to the device’s application are also available on request. Dimensions: height: 5.00 m length: 3.50 m width: 1.70 m weight: 2,200 kg

Sąlyga: naujas, Airflow rate 1600 m³/h Separation efficiency 99.9% Length of extraction hose 3,000 mm Motor 230 Volt Motor power 1.1 kW Weight 80.0 kg Dimensions (L x W x H) 580 x 580 x 900 mm Description: The newly developed TEKA filtoo filter unit is a mobile filtration system which can be used in a multitude of applications for filtering fumes, dusts, and gases. Also suitable for high-alloy steels (stainless steel). (The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%)). Where can the SIG 230 filtoo be used? - At welding workstations - In workshops - For soldering applications - By restorers - In metalworking shops Equipment: - BGIA/IFA-certified extraction and filtration unit, IFA 1005030, suitable for extraction on high-alloy steel and non-ferrous metals - Operating manual in German Hpsdpexaal Rjfx Ad Dsa Optional equipment at extra cost (recommended): - Retrofit kit STAVO (pre-separator for dust) - For FILTOO with spark guard and collection drawer Note: - Device is to be used only for extraction of dry dusts/fumes - Read the operating manual before initial commissioning

Sąlyga: naudotas, FP150, TBH, extraction and filtration system Model: FP 150 Condition: Used Hjdpjhii Rcsfx Ad Depa

Sąlyga: naudotas, Extraction capacity of the unit: 182 m³/h with 5 m air hose 45 mm Ø: 159 m³/h Hodpfsb Nv S Eex Ad Dspa Filter surface: 9.6 m² Electrical connection: single-phase 220 V Weight: 20 kg Required space: 850 x 330 x 450 mm

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: Tipinė plokštelė prieinama, As-new extraction system, model Dust Hog Duster SG 801-100. The unit was only operated once for a test run; otherwise, it is unused and in excellent condition. Power: 1.5 kW Airflow: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Shipping possible for €120. #8095 Hedpfx Asv Iyybod Djpa

Sąlyga: naudotas, Extraction system, central extraction, room air filtration unit ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of manufacture: approx. 2005 Airflow rate: approx. 5,000 m³/h Extraction inlet at filter entry: 1200 x 150 mm Exhaust outlet at filter exit: 400 x 300 mm Motor power: 10 kW Power supply: 400 Volt, 50 Hz Hedpfsicic Hex Ad Depa - Control cabinet for wall mounting - Bag filter - Maintenance hatch for filter replacement - Radial fan mounted on top of the unit Required space (L x W x H): 2000 x 1650 x 3650 mm Transport height without fan: 3100 mm Weight: approx. 2000 kg Very good condition

Sąlyga: geras (naudotas), Dust extractor, welding fume extractor, self-cleaning pneumatic vacuum filter KELLER Uni-Star XK. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, and all types of dry dust. The fan is positioned behind the filter on the clean air side, minimizing the risk of explosion to the lowest possible level. Fan power: 1.8 kW Hpodpfeivtqbex Ad Dsa "Multituba" type panel filter cartridges Airflow capacity: 800 m³/h

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1980 100 175, Maximum volumetric flow: 220 m³/h Hsdpfjb Nv S Ssx Ad Depa Maximum pressure: 22,000 Pa Electrical connection: 230 V Weight: 16.5 kg Required space: 720 x 320 x 410 mm

Sąlyga: naudotas, Welding fume extraction unit for wall mounting, Extraction device KEMPER type 85400 Serial no. 279092 Year of manufacture: 1997 Air flow rate: 1,700 m³/h Static pressure: 2,000 Pa Extraction connection: Ø 250 mm Motor output: 1.5 kW Power supply: 400 V, 50 Hz - Radial fan - Designed for mechanical air filter with approx. 99% separation efficiency - Main filter defective (additional charge for new main filter: €195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction arm with 3 joints and extraction hood (adapter connection to filter housing missing) - External control system missing, no filter monitoring, no start switch - Air outlet: 250 x 140 mm Space requirement (L x W x H): 680 x 660 x 1100 mm Hsdpfx Adeu S Tfge Depa Weight: approx. 120 kg Good condition Additional charge for new main filter: €195 net

Sąlyga: naudotas, Gamybos metai: 2009, siurbimo galia: 16 000 m³/val, neigiamas slėgis: 2 500 Pa, Dust extraction unit, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-operated, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Fan power: 15 kW Capacity: 16,000 m³/h Vacuum: 2,500 Pa Filter cartridges: 13 pcs. Filtration surface: 260 m² Inlet diameter: 2 x 560 mm Year of manufacture: 2009 Device dimensions: Height: 2.70 m Width: 5.70 m x 1.85 m Weight: 2,600 kg Hedpfx Aderk Itce Depa

Gamybos metai: 1991, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 004744, Extraction capacity: 1200 m³/h Hpedpfofm Ekxjx Ad Dja Fan drive: 0.75 kW Space requirement: 700 x 660 x 1030 mm

Sąlyga: naudotas, Filter unit – extraction system, central extraction, cartridge impulse filter VALCO type Pidclean 4N Central welding fume extraction Serial no.: 15003 Year of manufacture: 2003 Max. air flow: 3,500 m³/h Filter area: 92.8 m² Differential pressure: 700 Pa Hjdpfx Aemquwqsd Djpa Extraction connection at filter inlet: Ø 250 mm Exhaust air connection at filter outlet: 225 x 160 mm Compressed air requirement: 4 to 6 bar Motor power: 5.5 kW Power supply: 400 V, 50 Hz - Filter control AUTEL, type Eco S6 - Automatic pneumatic filter cleaning via control unit - 4 cartridge filters Ø 350 x 660 mm - Service hatch for filter replacement - Radial fan mounted on top of the unit - Mobile dust collection container, approx. 40 litres - Silencer for fan outlet, Ø 250 mm - Electrical schematic and operating manual for the control unit included Space requirement (L x W x H): 2,150 x 1,350 x 2,560 mm Weight: approx. 550 kg Good condition

Gamybos metai: 1996, Sąlyga: naudotas, Dust extractor, welding fume extractor, self-cleaning cartridge filter for plasma, laser, sandblasting, shot blasting applications. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring the high efficiency of the device. The fan is located on the clean air side, which minimizes the risk of explosion. Brand: STURM Model: 3-7x20/140 DLR P Year of manufacture: 1996 Motor power: 7.5 kW Airflow capacity: 4200 m³/h Inlet diameter: 200 mm Cartridge filter elements: 7 pcs. Filtration surface area: 140 m² Hpodpfx Adsif Rlue Dja Included: electrical schematic and partial ductwork

Gamybos metai: 1992, Sąlyga: geras (naudotas), Extraction capacity approx.: 1300 m³/h Filter area approx.: 28 m² Hpjdpfjfug Euex Ad Doa Separation efficiency (close to): 100% Arm length: 2 x 2 m Extraction arm diameter: 150 mm Extraction motor: 380 V, approx. 1.1 kW Required space: 1250 x 600 x 800 mm Weight: 98 kg

Sąlyga: geras (naudotas), Mobile station-type welding fume extractor, dust extraction unit, filter ESTA SRF K-10 1.3 kW (230V) fan mounted on the clean air side. 2 m extraction arm reach. Airflow rate: 950 m³/h. Vacuum: 2800 Pa. Hpsdpfx Aelqw Iged Dea The SRF K series is designed for extracting and filtering welding fumes and light grinding dust. It is an excellent solution for welding fume and other dust contamination problems. Welding or soldering fumes are filtered with an efficiency of 99.9%. High air flow capacity allows for the extraction of even large clouds of fumes. Automatic filter cleaning activated manually - after operation, simply connect the compressed air hose to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotating nozzle, which significantly extends the cartridge's service life. During welding, the unit does not need to be connected to a compressed air supply, thus maintaining its mobility.

Sąlyga: paruoštas naudoti (naudotas), Inlet diameter: 55 mm 1 suction speed electric connection: 230 V space requirement: 700 x 280 x 370 mm Hjdod Hbv Dopfx Ad Dspa

Sąlyga: labai geros būklės (naudotas), filtravimo plotas: 50 m², siurbimo galia: 650 m³/val, neigiamas slėgis: 38 000 Pa, High-pressure fume extraction unit, dust extractor, TEKA self-cleaning filter. Filter suitable for plasma and laser applications. Due to its design, the system is especially recommended for processing oily, sticky fumes, as well as dusts. The unit is equipped with an automatic cartridge filter impregnation system and an activated carbon filter to neutralize odors generated during processing. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high efficiency of the unit. The extraction system is intended for specialized applications where the filtered fumes and dusts may be moist and adhesive. The addition of impregnating agent captures moisture from the fumes, thereby protecting the filters from clogging. In this case, the service life of the cartridge filters is extended. After the cleaning process, the controller sends a pulse to a solenoid valve located on the top lid of the barrel filled with powder. The applied magnetic pulse agitates the impregnating powder, which is then transported into the suction pipeline. The powder coats the working surface and forms a protective layer on the filters. The unit is like new – it has only 126 operating hours!!! 7.5 kW turbine in a sound-absorbing enclosure with noise silencer. Hpodpfx Adorhidmj Doa Capacity: 650 m³/h at a vacuum of up to 38,000 Pa!! Filter area: 50 m² Inlet diameter: 100 mm Supplied with pneumatic slide valve, noise suppressor, and partial pipework.

Gamybos metai: 1991, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 201327/2, Suction capacity: 1200 m³/h max. static pressure: 1350 Pa electrical connection: 380 V, 0.75 kW Hpjdpfxonwmtco Ad Dea Dimensions (L x W x H): 700 x 660 x 1030 mm Weight:

Gamybos metai: 1999, Sąlyga: geras (naudotas), DISA dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum type for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Highly durable filter cartridges, moisture-resistant. Hpedpfxshqd Tvo Ad Dea Aluminized, antistatic, operating temperature up to 135°C. Fan power: 11 kW Capacity: up to 8,000 m³/h Vacuum: up to 4,300 Pa Filtration area: 128 m²