"Kemper/SAF" suvirinimo dūmų siurblys

SAF / KEMPER

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, veikimo valandos: 98 h, keliamoji galia: 200 kg, kėlimo aukštis: 13 000 mm, statybinis aukštis: 2 100 mm, kuro tipas: elektrinis, pavaros tipas: Elektro, Lanksti teleskopinė platforma Gedpfxsvky D Se Ap Ieiu Techninė būklė: labai gera Priekinių padangų tipas: masyvios gumos Priekinių padangų dydis: 600x190 Galinės padangos tipas: masyvios gumos Galinės padangos dydis: 600x190 Akumuliatoriaus įtampa: 48V CE sertifikatas,

Būklė: naujas, Gamybos metai: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Gsdoi Ar Ruspfx Ap Isiu Max. table load: 1500 kg

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Giodowf Dpgspfx Ap Ieu Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 mm - Travel path: 240 mm - Spindle speed: 8,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 32 mm - Spindle speed: 6,000 rpm TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm FRONT TOOL POST Giodpfxouhax Eo Ap Ieu - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm BACK MACHINING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 56,433 [h] ACCESSORIES - Control: Fanuc - Drive for powered tools on: S2, S3, S5 V+H - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m Godjt Hw Shopfx Ap Ieiu T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras aukštis: 1 200 mm, bendras plotis: 730 mm, bendras ilgis: 1 200 mm, įėjimo įtampa: 380 V, įžeminimo kabelio ilgis: 3 000 mm, bendras svoris: 205 kg, garantijos trukmė: 24 mėnesiai, aušinimo tipas: vanduo, žarnų paketo ilgis: 5 000 mm, įėjimo srovė: 16 A, lazerio galia: 3 000 W, lazerio bangos ilgis: 1 080 nm, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: The Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly versatile. Highlights and Features: - Power: 3,000 watts for top welding quality and speed Gsdpfx Apowzv D Ij Ijiu - Laser wavelength: 1080 nm, continuous mode with modulation frequency up to 20 kHz - Handheld laser welding head – ergonomically positioned for comfortable operation - Durable housing, intelligent internal structure for maximum service life - Touchscreen display for intuitive control - Optional automatic multifunction wire feed - Safety features: tri-color warning system, safety interlocks, error prevention safeguards - Cooling via separate water circuit with a 13-liter tank - CE-certified components compliant with European standards. Your Benefits - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible application options including automatic wire feeding and robot integration - Low operating costs and simple maintenance due to smart engineering and long-life components For further information or a consultation, the Airtech team is happy to assist you!

Būklė: naujas, Gamybos metai: 2025, TR serija yra lazerinė vamzdžių pjovimo staklė, skirta sunkių vamzdžių apdorojimui. Naudojama tradicinė horizontali lova, didelė keliamoji galia, mobilios portalinės konstrukcijos sistema leidžia valdyti įvairias sudėtingas pjovimo sąlygas. Platus pritaikymas statybinių sijų, vamzdynų apdirbimo ir plieninių konstrukcijų pramonėje. Didelių vamzdžių ir profilių lazerinio pjovimo staklės. Maksimalus diametras: H profilis iki 12 metrų ilgio vamzdis ar profilis Lazerių galvutė parenkama pagal medžiagos storį. Galia: 3–12 kW Maksimali žaliavos ilgis: 12 500 mm Apvalaus vamzdžio diametras: Φ70–Φ680 mm Kvadratinio vamzdžio kraštinė: □70×70–□480×480 mm Maksimalus pagreitis: 0,5G Kaina: EXW (sandėlis Europoje), įskaičiuota pakrovimas į sunkvežimį. Giodpfomxl S Aox Ap Iou Transportavimas, montavimas, paleidimas, apmokymai ir metinės priežiūros sutartys – pagal atskirą užklausą už papildomą mokestį. Montavimą ir apmokymus visada atlieka aukštos kvalifikacijos mūsų serviso komanda trijose Europos šalyse: Nyderlanduose, Vokietijoje, Rumunijoje. Oficialus pardavėjas: CNC Top Ten bv Coevorden, Nyderlandai

Būklė: naujas, Press pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Giedpjb U Hwmofx Ap Iou Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination by Ortlinghaus - Central lubrication by Vogel - Cam controller by Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0-411-49-1873, Technical Data: - Manufacturer: Bütfering - Model: Optimat SGO 211/RC - Number of sanding units: 2 - Year of manufacture: 2008 - Working width: 1,100 mm - Sanding belt width: 1,120 mm - Sanding belt length: 1,900 mm - Workpiece thickness: 3–160 mm - Feed speed: 2.5–13 m/min - Weight: 1,800 kg - Table height adjustment Standard Equipment: - Automatic workpiece thickness adjustment - Infinitely variable feed speed via frequency converter - Up to 125 sanding programs can be stored - Wear-free braking device 1st Sanding Unit (R) - Calibration drum - Profiled steel contact roller - Diameter: 160 mm - Drive motor: 15 kW 2nd Sanding Unit (C) - Combination unit with roller and sanding shoe - Rubberized contact roller 65 Shore - Contact roller diameter: 160 mm - Electronic segmented pressure bar with 35 mm segment width - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz - Compressed air consumption at 6 bar: 20 L/min - Belt blow-off device per impulse: 440 L/min Gsdpjyh Hwuefx Ap Ioiu - Extraction volume: approx. 2,880 m³/h at 20 m/s - Extraction connections: 1 x Ø 160 mm (sanding unit, roller) 1 x Ø 160 mm (sanding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Lakštų plotis 1550 mm Lakštų storis 6,5 mm Lenkimo spindulys 4,5 mm Viršutinio volo skersmuo 150 mm Šoninio volo skersmuo 130 mm Apatinio volo skersmuo 150 mm Didžiausias atstumas tarp viršutinio ir apatinio volo 20,0 mm Bendras energijos poreikis 2,2 + 1,5 kW Staklių svoris apie 2370 kg. Gisdpoxabkbofx Ap Isu Matmenys (I x P x A) 3300 x 1150 x 1110 mm Demonstracinė staklė – NAUJA Nenaudota (!!) Speciali kaina pagal užklausą Įranga: - Elektrohidraulinė 4 volų lakštų lankstymo staklė * su varomais viršutiniu ir apatiniu volais * tvirta suvirinta konstrukcija - Pritaikymo sritis: * nuo lengvos iki sunkios lakštų apdirbimo (plienas/ALU/nerūdijantis plienas) - Apatinio ir šoninių volų elektrohidraulinis reguliavimas - Šoninių volų linijinis vedimas - Viršutinis volas varomas galingu elektros varikliu ir planetine pavara - Laisvai judantis atskiras valdymo pultas - Grūdinti volai SAE 1050 (CK 45), su išgaubimu - Kūginio lankstymo įtaisas - 3 ašių skaitmeninis indikatorius tiksliam volų padėties nustatymui - Elektrohidraulinis atverčiamas guolis - Naudojimo instrukcija (PDF)