Sąlyga: naujas, Thread diameter M5 - M16 mm Dedpfxsfg U Sio Admocr Infinitely variable speed: 250 rpm Torque: 48 Nm Air pressure: 6 - 8 bar Working range: 150 - 1900 mm The pneumatically driven D-JSC tapping machine features, among other things, a compressed air motor with a quick-change chuck and a robust, flexible working arm. The tapping arm can be mounted directly on the workbench using the mounting flange and is immediately ready for operation, ensuring fast changeover times. It is possible to easily position the tap at the desired drilling location without having to reposition the workpiece under the tapping unit. Version with an adjustable angle, allowing the quick-change chuck to tilt for horizontal tapping operations. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 quick-change chucks with slip clutch included. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm - Magnetic base.

Sąlyga: naudotas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool mounting length, tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 – 44 – 95 – 190 rpm Hydraulic motor power: approx. 3 kW Roll drive motor power: 5.5 kW Dcodpsh A S Htsfx Admor Power supply: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic system integrated in the machine bed Space requirements (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools, with the same pitch as the workpiece, form the thread by penetrating the workpiece up to nominal diameter. The thread length can be at most as long as the thread rolling tools are wide. Through-feed Rolling: Used when the thread length is greater than the width of the thread rolling tool. Through-feed tools have three zones—the lead-in, the calibration section, and the lead-out. Grooving rolls have no pitch and are swiveled according to the thread angle of the profile to be rolled. Lead Rolls: These differ from grooving rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the pitch angle on the workpiece.

Gamybos metai: 1996, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: xxxx, High-Performance Bench Tapping Machines on T-Slot Table Dsdsf Tcy Djpfx Admjcr Technical Data: - Tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (swing radius) 2500 mm - Quick-change tool holder, size 2, Ø31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required floor space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Sąlyga: visiškai atnaujintas (naudotas), Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Overhauled - new Siemens PLC See video The machine is in our warehouse in Gussago BS, powered up Test run possible Mimu Machine Tools Thread rolling is a chipless mechanical process that can be performed either cold or hot, with the aim of improving surface finish (and thus fatigue resistance). Dsdpfxsvxa Dbo Admjcr

Sąlyga: paruoštas naudoti (naudotas), Ridgid 1224 Gewindeschneidmaschine, Gewindeschneider, Gebrauchtmaschine Dcjdpfswwgvyex Admsr Abmessungen: Länge: 1.140 mm Breite: 720 mm Höhe: 1.110 mm Leistungsdaten: Rohrgewinde: 1⁄4″ – 4″ (8 – 100 mm); mit dem Zahnradvorsatz 161 für Gewinde von 4″ – 6″ (100 – 150 mm). Gewindeschneiden von Bolzen: 1⁄4″ – 2″ (6 – 52 mm). Merkmale: Schneidet 1⁄4″ – 2″ Rohre mit 36 U/min und 2½″ – 4″ Rohre mit 12 U/min. Modell 1224 ist geeignet zum Schneiden von Gewinden an verschiedenen Rohrtypen, einschließlich schwarzer, verzinkter und kunststoffummantelter Rohre sowie Edelstahl-, IMC- und Starkwandrohren bzw. -stangen bis zu 30 HRC. Induktionsmotor sorgt für Geräuschpegel innerhalb der gesetzlichen Bestimmungen. Spezialmotor mit Anlauf-/Betriebskondensator für vollwertigen Gewindeschneidbetrieb auch bei Spannungsschwankungen. Verwendet einen universellen Schneidkopf 1⁄4″ – 2″ sowie einen einstellbaren Schneidkopf 2½″ – 4″ für konische oder zylindrische NPT/NPSM- oder BSPT/BSPP-Gewinde. Ständige und optimale Schmierung von Schneideisen und Werkstück durch Ölzufuhr durch den Schneidkopf. Technische Daten: Motor: 1,1 kW, Einphasen-Wechselstrom, 50 Hz, Induktionsmotor. Schalter: Robuster Drehschalter für Rücklauf / Aus / Vorlauf und integriertes Fußpedal. Spindeldrehzahlen: 36/12 U/min. Getriebe: 2-Gang-Getriebe mit 3:1-Übersetzung. Spannfutter: Hammerspannfutter mit austauschbaren Backeneinsätzen. Hinteres Spannsystem: Exzenter-Klemmung. Rohrabschneider: Modell 764, vollautomatisch verstell- und zentrierbar, mit 1⁄4″ – 4″ F-229 Schneidrad. Entgrater: Modell 744, Messer-Typ, 1⁄4″ – 4″. Schmierung: Ölzufuhr durch Schneidkopf. Pumpe: Selbstansaugende Zahnradpumpe, automatisch reversierend, mit konstantem Förderstrom.

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M24I/9053, Pasiūlymo numeris: M24I/9053 Staklių tipas: Sriegio valcavimo staklės Gamintojas: BAD DÜBEN Modelis: PRX 32 E CNC Pagaminimo metai: 2002 Skersmens diapazonas: 10-24 mm Spaudimo jėga: 7-20 t Maks. sriegio ilgis (radialinis metodas): 195 mm Darbinis aukštis: 160 mm Maks. žingsnis: 3,5 mm Volelio skylė: 80 mm Volelio plotis: 235 mm Volelio ilgis: 195 mm Apsisukimai per minutę: 40 - 315 Vieta: Vokietijoje Dedsw Nxnwspfx Admecr

Sąlyga: naujas, Thread diameter M3 - M8 mm Electric tapping machines for threads M3 - M8, adjustable angle. Comes with 5 quick-change chucks with slip clutch. The following parameters are adjustable via display: variable speed, adjustable depth, material selection, main rotation direction, thread type selection. Optional accessories: - Clamping table with T-slots: 990x700x800 mm. Dcjdpfefg U Snex Admjr - Magnetic base.

Sąlyga: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Dcodpfouz If Nsx Admor Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Gamybos metai: 2000, Sąlyga: geras (naudotas), Offer 20158 Technical Specifications: - Thread cutting capacity up to approx. M16 - Thread cutting depth approx. 75 mm - Drilling feed, up and down, steplessly adjustable - Throat depth 90 mm Dcodspvkm Tjpfx Admor - Spindle speeds up to 290 rpm - Pneumatic connection with pressure regulator 6 bar - Pneumatic foot switch - Drive 400 V / 0.75 kW - Required space approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Sąlyga: labai geros būklės (naudotas), Ruošinio skersmuo: 10 - 250 mm Dcedew Rrhgjpfx Admer Srieginio ilgio: 900 mm Srieginio žingsnis: 0,3 - 100 mm Veleno sūkiai: 72 / 1700 - 2540 aps./min. Užpakalinis nušlifavimas: 0,03 - 8 mm Maks. įtvirtinimo ilgis: 1190 mm Modulis - maks.: 10 Ruošinio sūkiai: 0,4 - 160 aps./min. Bendras galios poreikis: 13 kW Staklių svoris apie: 7,4 t Užimama vieta apie: 4,5 x 2,0 x 2,1 m Labai daug priedų: flanšai, keitikliai, dresavimo įrankiai, dresavimo ritinėliai, vidinio šlifavimo velenai, lunetės ir kt.

Sąlyga: geras (naudotas), Thread cutting machine, pipe thread cutter Dcedpfxjb A Iyas Admer - Suitable for: pipe size up to max. 2 inches - Threading dies: 1" inch - Drive: via 3-speed gearbox - Dimensions: 550/360/H240 mm - Weight: 55 kg

Sąlyga: naudotas, Gamybos metai: 2003, Thread Rolling Machine, Thread Rolling Machines Description: Rolling force: 2-20 tons Workpiece diameter: max. 75 mm Tool diameter: 140-200 mm Dcsdpfxet Hmv Ne Admjr Inclination: +/-6° Shaft diameter: 69.95 mm Manufacturer: ESCOFIER Model: H20Z Year of manufacture: 2003 Under power in our warehouse M i M u Machine Tools (Italy)

Sąlyga: naujas, Thread diameter: M3 - M16 mm Infinitely variable speed, max. 187 rpm Working range: 180 - 2000 mm Dcsdpjfg U Sqofx Admsr Motor power: 0.7 kW Electric tapping machines for thread sizes M3 - M16, adjustable angle. Includes 9 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional accessories: Clamping table with T-slots: 990x700x800 mm Magnetic base Also available for: M14 to M24 and M27 to M33.

Sąlyga: geras (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: 5890, Offer 25118 Technical Data: - Tapping capacity approx. M 3 – M 8 - Working range (pivot radius) approx. 1800 mm - Multiposition head - Spindle speeds 8 – 700 rpm - Quick-change tool holder, size 1, Ø 19 mm - Pneumatic connection 6 – 8 bar - Pedestal table height H 900 mm - Footprint approx. W 1000 x H 2000 x D 1000 mm Dsdpfxewmnhpe Admscr - Weight approx. 100 kg

Sąlyga: geras (naudotas), Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting device -Manufacturer: PCM, tapping wrench -Type: ET1-40 -Size: Ø12 mm -Dimensions: Ø40 x 52 mm Djdpfxjwzhgns Admjcr -Weight: 0.3 kg

Sąlyga: naujas, Thread diameter: M3 - M12 mm Djdpfod Iinuex Admocr Infinitely variable speed: 400 rpm Torque: 28 Nm Air pressure: 6 - 8 bar Working range: 150 - 1900 mm Machine weight: approx. 12 kg The pneumatically powered D-JSC tapping machine features, among other things, a compressed air motor with quick-change chuck and a robust, flexible working arm. The tapping arm can be mounted directly on the workbench using the mounting flange and is immediately ready for operation, ensuring quick setup times. It is possible to easily bring the tap to the desired borehole without having to position the workpiece under the tapping head. This version comes with an adjustable angle, allowing the quick-change chuck to be tilted for horizontal tapping. Pneumatic tapping machines for M3 - M12 threads, angle adjustable. Includes 6 quick-change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650 mm or 990x700x800 mm - Magnetic base.

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 6284, Offer 24033 Technical Data: - Thread cutting capacity: M 3 - M 24 - Working area (swivel radius): 1800 mm - Infinitely variable speed up to: 475 rpm Dcedpjrt Unwofx Admjr - Digital depth adjustment - Torque: 140 Nm - Quick-change tool holder size 2, Ø31 mm - Various inserts for quick-change tool holder - Table surface: 1200 x 990 mm - Table height: 830 mm - Required space: approx. W 1250 x H 2000 x D 1000 mm - Weight: approx. 300 kg

Sąlyga: geras (naudotas), Thread cutting machine, pipe threader - Pipe deburrer: for thread cutting machine - Pipe size: up to inner Ø 58 mm - Dimensions: see photos - Overall dimensions: 270/250/H75 mm Dcsdowyu Hfjpfx Admer - Weight: 2.7 kg

Sąlyga: naudotas, Gamybos metai: 1987, Thread diameter: 3 - 16 mm Dcjdpfov T Nrdjx Admsr Tool speed: 56 - 140 rpm Table size: 490 x 360 mm Throat (arm reach): 180 mm Operating voltage: 380 V Thread length: 60 mm Total power requirement: 0.55 kW Machine weight approx.: 0.25 t Space requirement approx.: 0.8 x 0.8 x 1.7 m

Gamybos metai: 2010, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 8298-5 + 1357075, Offer 20142 Technical Specifications: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drilling feed, up & down, steplessly adjustable - Throat depth 90 mm Dodpfjpahn Hsx Admscr - Spindle speeds up to 290 rpm - Pneumatic connection with pressure regulator 6 bar - Pneumatic foot switch - Drive 400 V / 0.75 kW - Required space approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Sąlyga: naujas, Thread diameter: 12 mm Stepless speed: 375 rpm. Working range: 180 - 1000 mm Motor power: 0.7 kW Electric tapping machines for M3 - M12 threads, Adjustable angle. Includes 7 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Options: Clamping table with T-slots: 990x700x800 mm. Dcjdpfx Asfg U Spjdmor Magnetic base. Also available for M14 to M24 and M27 to M33 threads.

Sąlyga: naujas, Thread diameter: M6 - M22 mm Infinitely variable speed: 60/200 rpm Torque: 105 Nm Air pressure: 6 - 8 bar Working range: 400 - 2000 mm The pneumatically driven D-JSC tapping machine features, among other things, a compressed air motor with quick-change chuck and a robust yet flexible working arm. Dodpfefg U Skox Admjcr The tapping arm can be mounted directly onto the workbench using a mounting flange and is immediately ready for use, enabling rapid changeover times. It is possible to simply bring the tap to the desired hole without having to reposition the workpiece beneath the tapping head. Version with adjustable angle: the quick-change chuck can be tilted, allowing for horizontal tapping operations as well. Pneumatic tapping machines for thread sizes M3 to M12, angle adjustable. Includes 6 quick-change chucks with slip clutch. Optional accessories: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm - Magnetic base

Sąlyga: naujas, Thread diameter M6 - M30 mm Infinitely variable speed 58 - 205 rpm Working range 320 - 1500 mm Motor power 0.85 kW Weight 36 kg Electric tapping machines for M6 - M30 threads, Adjustable angle. Includes 11 quick-change chucks with slip clutch. Settings via display: variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional accessories: Djdpsd Iinlofx Admscr Clamping table with T-slots: 990x700x800 mm. Magnetic base. Images show an M16 machine.

Sąlyga: naujas, Thread diameter: M3 – M16 mm Infinitely variable speed: max. 187 rpm Working range: 180 – 1000 mm Motor power: 0.7 kW Weight: 22 kg Dcsdpfx Adod Iinmomsr Electric tapping machines for threads M3 – M16. Angle adjustable. Includes 9 quick-change chucks with slip clutch. Adjustable via display: - Variable speed - Adjustable depth - Material selection - Selection of main rotation direction - Thread selection Optional accessories: - Clamping table with T-slots: 990 x 700 x 800 mm - Magnetic base Also available for: M14 to M24 and M27 to M33.

Sąlyga: naujas, Thread diameter 12 mm Infinitely variable speed 375 rpm Working range 180 - 2000 mm Motor power 0.7 kW Weight 28 kg Electric tapping machines for M3 - M12 threads, Adjustable angle. Working range from 180 to 2000 mm. 7 quick-change chucks with slip clutch. Deded Iinnjpfx Admocr Via display adjustable: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection.