Prispaudimo stalas

WMT FL-WB 90/60

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), Turning length: 6000 mm, swing diameter over bed/support: 820 mm/515 mm, spindle bore: 128 mm, speed: 1600 rpm, spindle power: 46 kW, center height: 400 mm, bed width: 560 mm, quill diameter: 125 mm, quill stroke: 280 mm, total connected load: 62 kW. Machine dimensions (X/Y/Z): approx. 6500 mm/2500 mm/2300 mm, control: Heidenhain, operating hours: approx. 9000 h. Includes accessories such as a steady rest. Documentation available. An on-site inspection is possible. Godpfx Acevwcwusyjip

Būklė: naujas, Bernardo Horizontal Bandsaw HBS 275 – 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Gedpjd Du T Isfx Acyjip Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H):1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Vice with quick-action clamp • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 42 mm, centro aukštis: 165 mm, plotis centre: 635 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 30 aps./min, bendras svoris: 900 kg, Dear Sir or Madam, For sale is a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is in full working condition and can be inspected and tested on site. Availability: immediate Centre distance: 635 mm Centre height over bed: 165 mm Centre height over cross slide: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Gijdpfx Acju St S Aeyop Space required (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Gamybos metai: 1996, būklė: geras (naudotas), mašinos/transporto priemonės numeris: xxxx, High-Performance Bench Tapping Machines on T-Slot Table Gedpfsf Tcy Djx Acyeip Technical Data: - Tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (swing radius) 2500 mm - Quick-change tool holder, size 2, Ø31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required floor space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC430, sukamosios stalo skersmuo: 540 mm, veleno greitis (maks.): 16 000 aps./min, veleno veikimo valandos: 32 000 h, veleno nosis: HSK63, įrankių magazino lizdų skaičius: 30, Įranga: sūkių greitis be galo kintamas, Labai gerai prižiūrėta HERMLE C800-U. Pasukamas-sukamas stalas: 540 x 540 mm Programinės veiklos laikas tik apie 34 000 val. Pritaikymo sritis: įrankių gamyba Aptarnavimą atliko gamintojas. Paskutinė griebtuvo galvos keitimas: 2017-04 Naujas A ašies pavara Heidenhain iR matuoklis Gsdpsx Hg E Tofx Acysip

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, sukimosi skersmuo virš skersinio stumduko: 800 mm, veleno skylė: 92 mm, tekėjimo skersmuo: 800 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 9 000 mm, bendras plotis: 1 900 mm, bendras aukštis: 2 100 mm, veleno greitis (maks.): 1 400 aps./min, veleno greitis (min.): 14 aps./min, Heidenhain ND-780 mit 3-Achsen-Digitalanzeige (X, ZO, Z) Heidenhain LS388C Messstäbe 2 x CE-Futterabdeckung für 500 & 900 mm SCHUNK 3-Backenfutter Ø 400–102 mm Bison 4-Backenfutter ... Mitlaufende Lünette Ø 30–210 mm Mitlaufende Lünette Ø 210–370 mm Drehlänge über Bett: 6000 mm Umlaufdurchmesser über Bett: 800 mm Umlaufdurchmesser über Planschlitten: 520 mm Umlaufdurchmesser im Bettspalt: 870 mm Bettspaltlänge: 320 mm Spindelbohrung: 92 mm Spindelleistung: 15 kW Bettbreite: 550 mm Spindelaufnahme: MK6 Giedpevn Svuefx Acyep Drehzahlbereiche: 14–1400 U/min Länge: 9000 mm Breite: 1900 mm Höhe: 2100 mm Gewicht: 7670 kg

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 860027, Offer 24331 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm Giodpfxeu Aq Ame Acyop - Thread cutting attachment up to: M 16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 – 1800 rpm - Spindle speeds: 200 – 3600 rpm - Motorized stroke of the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg

Būklė: naujas, Cutting diameter: 305 mm Gijdeu Dbvtopfx Acysp Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Būklė: naujas, Gamybos metai: 2026, Standard Equipment - Torsion-resistant, robust cast saw frame - Powered chip removal brush - High-performance industrial worm gear motor - Automatic shut-off after cutting completion - Mechanical saw blade tensioning with electric blade breakage monitoring - Quick-release vice, adjustable - Hydraulic saw frame descent with rapid feed function (infinitely adjustable) - Electric coolant pump - Precision-ground carbide saw blade guides (adjustable) - Large-diameter round support table, rotates for mitre cuts, mitre angle display (scale) on operator side - Direct switching from manual to descent mode - Easily removable chip collection tray - Material stop 500 mm with scale - Incl. combination-tooth saw blade 4/6. Technical Data - Motor: Three-phase current 400 V, pole-changeable, 1.1/1.5 kW - Saw blade dimensions: 2720 x 27 x 0.9 mm - Flywheel diameter: 300 mm - Cutting speed: 40/80 m/min - Vice clamping width: 275 mm - Working height: 978 mm - Weight: 370 kg - Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting range: see data sheet Further accessories available on request. DELIVERY: FREE OF CHARGE (within Germany) Giedpfofg Eq Rex Acysp NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT RANGE! REQUEST A QUOTE!

Būklė: naujas, Gamybos metai: 2026, For cutting pipes and solid materials made of stainless and tool steel Two cutting speeds via a pole-changing motor Robust gearbox with hardened and ground shaft Precise and heavy-duty band guides with adjustable carbide plates Longer blade life due to a 25° saw arm incline Efficient coolant application at the band guides Electromechanical band tension monitoring: if tension deviates, a microswitch turns the machine off Chip removal brush for optimal cleaning and maintenance of the saw blade Semi-automatic operation: - Automatic workpiece clamping after starting the cutting cycle - Cutting performed at selected band speed - Automatic stop of the lowering motion and blade at the bottom position - Automatic return of the saw arm to its upper position - Vise opens automatically - Operator only needs to load/unload the material Equipment: - Two cutting speeds Gijdjd Hx Uqepfx Acyjp - Cutting depth sensor - Coolant system - Chip removal brush - Saw blade tension monitoring - Swiveling control panel Dimensions: Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive motor: Power rating: 1.5 kW Electrical data: Connection voltage: 400 V Machine data: Saw blade speed(s): 20 – 100 m/min Speed adjustment: stepless Saw blade length: 2720 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre range: +60° to -45° Cutting capacities: 0° round (pipe): 230 mm 0° round (solid): 150 mm 0° rectangular (hollow profile): 280 x 180 mm 0° bundle (pipe): 180 x 120 mm -45° round (pipe): 195 mm -45° round (solid): 110 mm -45° rectangular (hollow profile): 180 x 170 mm -60° round (pipe): 125 mm -60° round (solid): 80 mm -60° rectangular (hollow profile): 120 x 100 mm +45° round (pipe): 185 mm +45° round (solid): 110 mm +45° rectangular (hollow profile): 180 x 120 mm Feed: Table height for material infeed: 785 mm Min. remaining workpiece length: 22 mm