Specializuoti įrenginiai pirkti naudotą (137)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras svoris: 3 300 kg, ⭐️TM-R34 Column Lift for Trucks – Electro-Hydraulic, Wireless⭐️ New, reinforced generation of TM-GROUP mobile column lifts The TM-R34 lift is a technologically advanced solution designed for professional workshops servicing trucks, buses, trailers, specialist vehicles, and agricultural machinery. A set of four mobile columns offers a total lifting capacity of up to 34 tons, enabling the equipment to easily handle even the most demanding servicing tasks. Bwjdpfx Aev Uk D Rsi Esw Each column is equipped with an efficient electro-hydraulic system and provides a lifting capacity of 8,500 kg, which represents a real advantage over many solutions currently available on the market. A new feature in the TM-R34 model is the additional reinforced support columns on wheels (so-called mobile stands), supplied as standard. They provide even greater stability during operation at maximum load and additional safety during long-term service work. Technical data: - Model: TM-R34 - Total lifting capacity: 34,000 kg - Lifting capacity per column: 8,500 kg - Number of columns: 4 - Lifting height: 1,800 mm - Column height: 2,563 mm - Supported wheel diameter: 480–1,270 mm - Connection type: wireless / signal cable - Power supply: 230V - Motor power: 3 kW - Weight per column: 760 kg - Support columns: 4 pcs included - Certifications: CE, ISO 9001:2015 Support stand parameters: - Maximum lifting capacity: 8,165 kg - Minimum height: 1,240 mm - Maximum height: 1,840 mm - Number of adjustment positions: 7 - Threaded adjustment range: 40 mm - Base dimensions: 810 mm - Rubber top pad: 150 mm ✅ Wireless control and technology The TM-R34 operates in either wireless or wired mode, providing complete operational flexibility. The columns communicate via radio and are fully synchronized. Control is via panels on each column with real-time operational feedback. Supports both single and group mode operation. ✅ Reinforced construction and performance The TM-R34 lift offers increased lifting capacity up to 34T (8,500 kg per column) and operates on 3 kW / 230V motors. The 480–1,270 mm wheel range allows servicing of most heavy vehicles. Mobile construction enables rapid repositioning without installation. ✅ Safety and certifications The Safety Lock system secures the load at height, and each post is equipped with emergency STOP. The set includes 4 mobile support columns to increase stability under heavy loads. The equipment is ISO 9001:2015 and CE certified. ✅ TM-R34 – more lifting power, greater stability, full control The TM-R34 lift meets the needs of modern workshops that demand maximum efficiency, mobility, and safety. Enhanced 34T lifting capacity, additional mobile supports, and wireless synchronization make it one of the strongest and most functional solutions in its class.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Grynumas: 99,999 Talpa: 21,3 m3/h Bwsdpfx Aioxn Upyj Esw

Būklė: nepatikrintas (naudotas), Gamybos metai: 1992, Trumpas aprašymas: - 3 ant 3 temptuvų sistema - su spaudimo lazdele Bsdpfxew Rkiis Ai Ejww - automatinis kanų keitimas - yra mašinos dokumentacija Paskutinė paskirtis (2024 m. sausis): - taikomasis gaminio bandymas - naudota kaip pagrindas verpti OE mašinoje (apie 45 kg mėginiui), - netikrinta, tik dalims! Mašina išardyta ir sandėliuojama, galima apžiūrėti vietoje. Tik atsiėmimas 14727 Premnitz pirkėjo lėšomis, siuntimo nėra. Jei domitės, laukiame jūsų pasiūlymo. Užklausos tik raštu.

Būklė: naudotas, „Bosch Rexroth“ – tiesinės cilindrų mašina Bjdpehufclefx Ai Eoww Ši mašina yra specialiai „Bosch“ pagaminta, skirta naudoti jos gamybos procese. Mašina apima: „Rexroth MSK050C-0600-NN-M1-UG1-NNNN“ – 3 fazių sinchroninis PM variklis. „Festo DGC-40-650-KF-Y5R-A 532449 H608“. „Rexroth EMC-063-NN-2“. „Schischke MY_1106 E2“ – įtampa 380–480, 6 barai, 1300 kg, pagaminimo metai – 2016. Būklė: naudota. Visas įrenginio išardymas, platus sandėlių platformų, padėklų lentynų, lentynų, kroviklių pasirinkimas. Aukštos kokybės pramoninės mašinos, tekinimo, šlifavimo ir rankinės mašinos. Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinis pristatymas – pagal užklausą!

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Bwodpfefz I Edex Ai Esw Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, „Grundfos MTS20-80 R46 DQ“ – pramoninis sraigtinis siurblys – 7,5 kW Originalus „Grundfos MTS20-80 R46 DQ“ pramoninis sraigtinis siurblys, komplektuojamas su 7,5 kW IE3 elektros varikliu. Naujas, nenaudotas, tiekiamas originalioje transportavimo pakuotėje. Techninės specifikacijos: * Gamintojas: „Grundfos“ * Modelis: MTS20-80 R46-DQ-T * Prekės numeris: 99186029 * Siurblio tipas: pramoninis sraigtinis siurblys * Variklio galia: 7,5 kW / 10 AG * Įtampa: 3 × 380–415 V * Dažnis: 50 Hz * Variklio sūkių skaičius: 2910–2920 aps./min. * Efektyvumo klasė: IE3 * Apsaugos klasė: IP55 * Svoris: 102 kg (įskaitant pakuotę) * Būklė: naujas / nenaudotas Tinka pramoninėms mašinoms, aušinimo tepalo cirkuliacijai, metalo apdirbimo įrangai ir tepimo sistemoms. Prieinamas kiekis: 10 vienetų. Vieta: Botlekas, Roterdamas, Nyderlandai. Pristatymo sąlygos: EXW (iš sandėlio) Bwodpfx Ais Afn Nro Ejw Siuntimas gali būti organizuotas pagal užsakymą. Norėdami gauti daugiau informacijos arba kainos pasiūlymą, susisiekite su mumis.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Bjdpfofz Ndysx Ai Esww Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Gamybos metai: 2004, būklė: naudotas, Hollinger 4 taškų suvirinimo aparatas, tipas ASP-L Bwsdpfxeylingj Ai Eew

Gamybos metai: 2024, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Elektrinis garintuvas. Gali garinti skystas dujas visose temperatūrose. Tokios įrangos mums reikia skystojo CO₂ garinimui ir saugojimui betone. Taip pat galima naudoti kitoms paskirtims: azoto, deguonies ar kitų dujų garinimui ir naudojimui galutinėje proceso stadijoje. Nauja kaina: 140 000 CHF. Bwjdpfx Aijx H R Ryj Eew

Būklė: geras (naudotas), Gamybos metai: 2013, 4 units diode laser system, Limo Diocut 1300 – used - : Price per unit ex-location: €1,950 (net)! Manufacturer: LIMO (Lissotschenko Mikrooptik) Model: Diocut 1300 Year of manufacture: 2013 Bedoumi Stspfx Ai Eeww 400V, AC +/- 10% 50/60 Hz I < 16A, 3-phase, + N + PE Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras svoris: 10 000 kg, bendras ilgis: 11 600 mm, bendras plotis: 2 560 mm, bendras aukštis: 600 mm, įėjimo įtampa: 220 V, įvesties srovės tipas: trifazis, įėjimo dažnis: 60 Hz, TM-M60 Body/Chassis Repair Bench for Heavy-duty Trucks and Large Vehicles Bodpfx Ajvuxygoi Ejww This is a professional device designed for comprehensive repair and straightening of various body and chassis components of trucks, delivery vehicles, and commercial vehicles. Thanks to its robust construction and equipment featuring six towers, each with substantial pulling force (25 tons each), this bench enables effective execution of advanced repairs, such as restoring the shape of damaged elements, straightening deformations, and eliminating distortions. High load capacity and precise tools make our repair bench ideal for professional workshops, ensuring speed, accuracy, and reliability when repairing oversized vehicles. Specifications: - Hydraulic pressure: 70 MPa (10,000 psi) - Pneumatic pressure: 0.8 MPa - Maximum tower tension: 25 tons (245 kN) - Loading capacity: 50,000 kg - Tower operating range: 360 degrees - Total weight: 10 tons - Number of towers: 6 Features: 1. Equipped with 6 towers, each offering a maximum pulling force of 25 tons. 2. Supplied with a complete set of pushing and pulling tools, adaptable for all straightening tasks. 3. Includes a 50-ton lifting device for effective repair of deformed beams. 4. Hydraulic arm with a 25-ton force for correcting deformations, bulges, twists, etc. 5. Four towers have a height of 2,500 mm, while the remaining two are 4,320 mm high. 6. Color can be selected from the RAL palette. 7. Number of towers selectable by the customer.

Būklė: naudotas, Gamybos metai: 1985, Funkcionalumas: nepatikrintas, Čia siūloma Titan apvyniojimo įranga. Funkcionalumas netikrintas, todėl parduodama tik meistrams ar atsarginėms dalims. Įrenginio matmenys matomi nuotraukose. Yra mašinos vadovas ir naudojimo instrukcija. Techniniai duomenys: Gamintojas: Titan Tipas: VK 10 Pagaminimo metai: 1985 Bsdpfxoy Nav Ro Ai Ejww Nominali srovė: 2,5 A Nominali įtampa: 380 V / 50 Hz Maks. pakuotės dydis: 1200 x 600 mm

Gamybos metai: 2025, būklė: naujas, Kaip ideali mašina pramonės bei šildymo ir oro kondicionavimo sistemų montavimo darbams, Genie® Superlift Contractor® SLC™-24 medžiagų keltuvas standartinėje komplektacijoje turi tvirtai pritvirtintą atramų sistemą su patentuotu užraktu, užtikrinančiu papildomą šoninį stabilumą. Įrenginį patogiai valdo vienas asmuo sunkioms apkrovoms kelti, nuleisti ar transportuoti. Bedpfxsyt I Izo Ai Ejww

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Bjdpjfz A Iwefx Ai Eoww Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Būklė: naujas, IPETRONIK   Tipas: Interjero klimato simuliavimo kamera   Techniniai duomenys ir įrenginio aprašymas:   IPETRONIK interjero klimato simuliavimo kamera (nauja, nenaudota)   Interjero klimato simuliavimo kamera skirta simuliuoti keleivių saloną, kad būtų galima atlikti bandymus uždaro oro cikle. Ji turi kintamą interjero tūrį nuo 1,8 iki 4 m³. Oro, pašalinamo iš priekinio garintuvo arba oro kondicionieriaus, tūris reguliuojamas ir tiekiamas į interjerą. Interjero klimato simuliavimo kamera naudojama tik galiniams garintuvams, kurie sumontuoti keleivių salone, tikrinti. Izoliuotas korpusas sumontuotas ant aliuminio profilio rėmo su ratukais. Kameroje įrengtas šviestuvas.   Kamera apsaugota nuo per didelės temperatūros naudojant saugos termostatą (ESTI).   Viršijus leistiną temperatūrą, ESTI viduje esanti stiklinė kapsulė sunaikinama. Įrenginys sustabdomas. (TRIGERIO TEMPERATŪRA: 80 °C)   Izoliuotos kameros techniniai duomenys:   Matmenys:   Išorė: plotis 1860 mm, gylis 2360 mm, aukštis 1360 mm Viduje: plotis 1700 mm, gylis 2200 mm, aukštis 1200 mm   Šiltinimas:   80 mm poliuretano standžioji puta, be freono, šiluminės varžos koeficientas U = 0,27 W/m2K, statybinės medžiagos klasė B1 pagal DIN 4102   Techniniai duomenys ir įrenginio aprašymas:   Jungtis: „nutas ir plunksna“ sistema su įputomis ekscentrinėmis užraktinėmis svirtimis.   Paviršiai:   Abiejose pusėse: 0,8 mm nerūdijančio plieno plokštė 1.4301, šlifuota, grūdėtumas 320   Grindo konstrukcija:   2,0 mm nerūdijančio plieno plokštė 1.4301, SM raštu, neslystantis paviršius, Grindys aplink visą perimetrą pakeltos 90 ° (apie 15 mm), grindų plokštė lygiai su sienų plokšte, Sluoksniuotos faneros plokštė, skirta slėgio paskirstymui, atlaiko 1500 N apkrovą (atraminis plotas > 4 cm2), 30 000 N/m2 paviršiaus apkrova, grindų siūlės visiškai suvirintos, nerūdijančio plieno vamzdis, suvirintas kaip grindų nutekėjimas, per grindis išvestas į apačią Bwedpfx Aszd Ukpji Eew   Kameros durys:   Luko durys, 1 varčia, 800 x 1200 mm i.L., DIN kairėje pusėje, šildomas durų rėmas (230 V), šildymo juostos be silikono, keturpusis sandarinimo profilis iš EPDM, svirties užraktas, užrakinamas, avarinis atblokavimas, šildomas permatomas langas, 500 x 500 mm, trigubo stiklo, paviršiaus šildymas (230 V), rėmo šildymas (230 V), šildymas reguliuojamas atskirai, apvadas be silikono   Stumdoma siena:   1680 x 1180 mm, 80 mm poliuretano standžioji puta, abiejose pusėse 0,8 mm nerūdijančio plieno plokštė 1.4301, šlifuota, grūdėtumas 320, su apsaugine plėvele, uždaryta plokšte iš kitos pusės   (Galinė siena gali būti rankiniu būdu be žingsnių reguliuojama, siekiant keisti tūrį)   Uždaro oro ciklo sistema:   Temperatūros reguliavimui uždaro oro ciklo grandinėje sumontuotas šilumokaitis (Systemair) netiesioginiam temperatūros reguliavimui. Oro srautas užtikrinamas radialiniu vamzdiniu ventiliatoriumi (Cosmo), šildymas vyksta per elektrinį šildytuvą, integruotą į šilumonešio grandinę (Türk ir Hillinger). Šildytuvai nuolat stebimi naudojant temperatūros daviklius ir ribotuvus (Türk ir Hillinger, Johnsson Controls). Aušinimas atliekamas per antrinę šilumonešio grandinę su siurbliais (KSB) ir 3 krypčių vožtuvu (Belimo). Įdiegta elektrinė šildymo galia 1 * 6 kW. Maišymo santykis yra 50 % vandens / 50 % etilenglikolio.   Maitinimas iš stoties: =TME2++AS-QF21 Darbinė įtampa: 400 V Galia: 17 kW Nominali srovė: 33 A Apsauginis saugiklis: 35 A Valdymo įtampa: 24 V DC / 24 V AC / 230 V AC PLC sistema: S7 300   Būklė: naudotas   Pristatymo komplektas: (Žr.

Būklė: naudotas, Tvirtas skersinis transportuoklis apvaliosioms medienoms Parduodamas itin tvirtas skersinis transportuoklis apvaliosioms medienoms, skirtas profesionalioms medienos apdirbimo įmonėms. Įranga: * Sunkioji pramoninė konstrukcija * Dviguba grandininė transportavimo sistema * Trumpas transportavimo atstumas * Greitas ir patikimas apvaliosios medienos transportavimas į medienos pilnus vagonus * Tvirti ir ilgaamžiai plieniniai elementai * Galima įsigyti iš karto Įranga yra geros būklės, veikianti ir ją galima apžiūrėti suderinus laiką. Prašome pateikti sąžiningą ir realų pasiūlymą. Bwedpfx Ajzq T Adji Esw

Gamybos metai: 2025, būklė: naujas, Rankiniu būdu valdomi Genie® Superlift® Advantage medžiagų keltuvai siūlo įvairias krovinio paėmimo galimybes. Genie® Superlift Advantage™ SLA™-20 tiekiamas su universaliu, reguliuojamu padėklų važiuokle, kuri leidžia dirbti tiek su plačiais kroviniais, tiek pralįsti pro siaurus durų praėjimus, ir greitai pakraunamas ant ar į transporto priemonę. Bsdpfxjyt E Eqs Ai Eoww

Gamybos metai: 2020, būklė: naujas, DESCRIPTION The so-called semi-demineralized water station is produced from the demineralized water station using ion-exchange technology. Bwodpsfz I Syefx Ai Ejw The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle - Strongly basic anion exchanger operating in the chloride cycle - Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Columns are made of AISI316L steel.

Būklė: beveik kaip naujas (parodų įrenginys), Compact vertical axis balancing machine with a load capacity of up to 50 kg. Thanks to its compact design, the machine occupies relatively little space and does not require foundation work, allowing for easy relocation to any chosen location. The balancing process is managed by the latest measurement system, 'ROTORTEST 9.5', equipped with dedicated software featuring workshop programs that calculate the unbalance for convenient correction methods, including drilling or milling parameters. Bodpfx Aiof Nvwpe Ejww A vertical axis balancing machine is recommended for balancing rotors mounted on a bore, such as fan rotors, pulleys, flywheels, tools, pumps, and many others. The main advantages of this type of balancer are its versatility, the ability to use dedicated self-centering fixtures providing high measurement accuracy, and a simple, quick calibration method known as 'factory calibration', which does not require calibration runs before starting measurements. The entire procedure involves simply entering the basic rotor parameters into the program. This machine is an excellent choice for balancing single pieces of various rotor models and is particularly well-suited for balancing large series of the same rotor model. Specifications: - Maximum rotor weight: 50 kg - Maximum rotor diameter: 650/850 mm - Maximum rotor height: 500 mm

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), The line includes the following equipment: 1. GUSBI – Rotary table (carousel) with 24 stations and an automated polyurethane foam dispenser operating on the X and Y axes. Brand: GUSBI Italy Model: PF24 Serial number: 4625 Year of manufacture: 2004 Number of stations: 24 Table dimensions: 600 mm x 500 mm Power supply: 30 kW Compressed air: 500 nl/min at 8 bar Capacity per 8h: 2,000 – 3,500 pcs – depending on filter size and mold multiplicity 2. Rotary (roller) pleating machine for filter paper Brand: SAS Italy Model: PANELFILTER Type: 350/190 Power supply: 3.5 kW Compressed air: 6 bar Year of manufacture: 2004 Number of pleating modules/heights: 8 complete sets - pleat height 20mm - pleat height 28mm - pleat height 32mm - pleat height 36mm - pleat height 38mm - pleat height 40mm - pleat height 48mm - pleat height 53mm - pleat height 60mm Machine design prepared for the installation of a trapezoidal pleating attachment. 3. Hot Melt adhesive dispenser: Brand: NORDSON USA Bedpfjgcvc Tsx Ai Eeww Type: VA 025-4FFXX4, 400V Model: Versa Blue 8036-189 Serial number: LU04B01511 Year of manufacture: 2004 Tank capacity: 50 kg Number of dispensing heads: 3 Power supply: 11 kW Compressed air: 6 bar 4. Aluminum filter moulds – 131 pcs for 100 different types of automotive filters. We also offer training and know-how transfer.

Būklė: dilaminuotas dirbtuvėje (naudotas), Hommel duonos likučių smulkintuvas, džiūvėsėlių malūnėlis. Puikios būklės, iš karto paruoštas naudoti, 16 A jungtis. Dėl papildomos informacijos kreipkitės drąsiai. Bjdjgh Hu Uspfx Ai Esww

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, bendras ilgis: 600 mm, bendras plotis: 400 mm, bendras aukštis: 690 mm, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, aušinimo tipas: oras, LASER - LAS 22 is a compact benchtop unit with a small working area, making it ideal for small parts or, for example, nameplates and identification tags. Thanks to its compact design, the system is exceptionally practical and can be used virtually anywhere. The device is extremely easy to operate and requires no programming knowledge. With the powerful laser software, you can easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming skills. The software automatically increments serial and article numbers after initial configuration. Furthermore, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Integration of a handheld scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Bodpsxqhnzefx Ai Eoww - Fiber laser 20 watts (Optional: 30 watts) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm - EZCAD marking software (German/English) - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optionally: extraction unit (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton Bjdpfx Aijfz Dkno Eeww • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Nuolatinė srovė, įėjimo įtampa: 220 V, bendras svoris: 50 kg, garantijos trukmė: 24 mėnesiai, AVANTECHNO 611 is a heavy-duty mobile line boring and internal welding system designed for precise on-site restoration of worn cylindrical holes and pivot connections. The machine combines line boring, internal welding, facing, drilling, and thread cutting in a single portable unit. It mounts directly onto the workpiece, enabling repairs without dismantling heavy components while maintaining accurate coaxial alignment of multiple bores. Technical specifications: - Boring range: Ø 62 – 600 mm (Ø 32 – 1,000 mm with additional kits) - Internal welding range: Ø 350 – 1,000 mm - Precision: up to 0.01 mm (H7 tolerance field) - Feed rate: 0 – 0.5 mm/rev - Maximum spindle speed: up to 300 rpm - Continuous feed travel: 300 mm (extendable) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 2.5 kW - Weight of electromechanical unit: approx. 50 kg Applications Suitable for repair of: - Excavators and construction machinery - Mining and industrial equipment Bwjdpoyq Rivofx Ai Eew - Agricultural machinery - Cranes and lifting equipment - Heavy mechanical assemblies Advantages: - On-site repair without disassembly - Reduced downtime and transportation costs - Portable and robust design - Manufactured in the EU with a 24-month warranty - Engineered for heavy industrial applications

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller Bjdpfx Aisfz I R Re Esww • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve