Spausdinimo mašinos pirkti naudotą (19)

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Gamybos greitis: 600 puodelių/min Spalvos: 8 Gslhcjxww Nujdwxeiw Mažiausias BH skersmuo: 60 mm Didžiausias BH skersmuo: 130 mm Mažiausias aukštis: 30 mm Didžiausias BH aukštis: 160 mm Skaitiklio rodmuo: pagaminta 25 731 666 puodelių Įranga / kita informacija: Sudaro: • Išrikiavimo įrenginys • Spaudos mašina • Puodelių kreiptuvai • Pakartotinio išrikiavimo įrenginys

Būklė: beveik kaip naujas (naudotas), Type: Farsoon FS HT1001P System Configuration: Build Station, Preheating Station, Cooling Station Automated Build Job Changeover between Two Build Cylinders Scanner: Chinese Manufacturer, Deviates from Series Standard Modifications and Condition: Overflow system upgraded with automated pumping Laser safety windows replaced, approx. 200 operating hours Infrared heaters replaced, approx. 500 operating hours Interfaces for IR cameras available (cameras not included) Curtains installed in the build chamber Printer operating hours: under 2,000 hours Dimensions: 5585 × 3410 × 2980 mm Weight: approx. 5,000 kg Maximum Build Size: 1000 × 500 × 450 mm Build Volume: up to 15 liters per hour Geloy Hg S Tshcdwxeiw Scanner: 2 × High-Precision 3-Axis Galvo System Scanning Speed: up to 15.2 m/s Layer Thickness: 0.06 to 0.3 mm Lasers: 2 × CO₂ lasers, 100 W each Maximum Chamber Temperature: 220 °C Thermal Control: Multi-zone heating with intelligent temperature regulation Temperature Control: Continuous real-time monitoring and optimization Operating System: 64-bit Windows 7 File Format: STL Software Features: Manual and automatic control, real-time parameter adjustment, 3D visualization and diagnostics Recommended Materials: FS3300PA, FS3250MF, FS3400GF, FS-TPU Voltage: AC 380 V, 3-phase, N/PE Frequency: 50 to 60 Hz Total Power: 25 kW Maximum Current Draw: 45 A Voltage Fluctuation: ±10% Fusing: 3 × 50 A Preheating Station: No active preheating present Used for storage of build cylinders for automated changeover Roller blinds as protection against crushing and burn hazards Cooling Station: Nitrogen flooding with sealing Surface temperature measurement of the powder cake Roller blinds as safety devices Cooling System: Deltatherm Compressor Power: 1.32 kW Pump Power: 0.45 kW Flow Rate: approx. 18 liters per minute Pump Pressure: approx. 5.0 bar Coolant: Drinking water Connections: Supply and return 3/4" female thread Tank Volume: approx. 30 liters Air Volume: approx. 2,250 cubic meters per hour One axial fan installed Fan Power: 135 W Dimensions: Width 740 mm, Depth 740 mm, Height 500 mm Weight: approx. 110 kg Unpacking Station (Powder Breakout Station): Dimensions: 1870 mm × 920 mm × 2150 mm Weight: approx. 1,200 kg Voltage: 200-240 V Frequency: 50 to 60 Hz Total Power: 2 kW Maximum Current Draw: 10 A Powder Handling: Schleiss RPTech Function: Mixing, sieving, and conveying of plastic powders System forms a complete powder cycle Components: Powder mixing system with mixer and sieve machine Containers for mixed powder, overflow powder, used powder, and fresh powder Pumps for material transfer between containers Humidification module available Vibration motor for sieve not included Powder Handling Mixing and Sieving System Technical Data: Dimensions: 1800 × 815 × up to 2600 mm height Weight: approx. 240 kg Temperature Range: 0 to 40°C Mixing Throughput: up to approx. 10 liters in 8 min Sieving Throughput: 5 kg in 3 min Voltage: 230 V at 50 Hz, 16 A fuse Mixer Power: 210 W Extraction Power: 2,200 W Air Requirement: approx. 100 to 140 liters per minute Operating Pressure: 5 to 6 bar Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data. All information without guarantee!) For further questions, feel free to contact us by phone.

Būklė: geras (naudotas), EOS Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6,735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & control terminal Exchange frame with build platform Multibox is a typical accessory for powder handling with EOS systems. Used for transport and intermediate storage of material. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Giolhcdwszimhqoxsw Nitrogen generator: integrated, purity > 99 % Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, energy consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1230 × 1175 × 2100 mm Control cabinet: 610 × 790 × 2100 mm Operating terminal: 950 × 700 × 1550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure pump Technical specifications Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: Air-cooled Pump: High-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank capacity: approx. 5 liters Medium: Water or water-glycol Connection: NPT version ("AN") Supply: 200–230 V AC, single-phase Refrigerant: R407C Weight: approx. 1,110 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Pagaminimo metai: 1979 (atnaujinta 2009 m.) Gijlhcjzktycodwxow plotis: 1600 mm greitis: 600 m/min. maksimalus ritės skersmuo apvijoje: 600 mm pjovimo tipas: su skalpeliais

Būklė: labai geros būklės (naudotas), Eos EOSINT Plastic Laser Sintering System Here we are offering an Eos EOSINT Plastic Laser Sintering System. Eos EOSINT Plastic Laser Sintering System P385 Giolhjzdyx Ejcdwxsw The following items are included with the EOS P385 system: Build chamber container Powder container Chiller: Termo TEK Termochiller 1100 The following upgrades have already been completed: Software: CDs Eosint P3 Process Software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser replacement on 15.05.2008 X-axis drive motor: replacement with used motor on 04.05.2020 Pyrometer replacement on 30.06.2020 Build size: 350mm x 350mm x 610mm Voltage: 3/N/PE/400V, Frequency: 50 Hz Connected load: 8 kW, Fuse protection: 32 A Max. laser power: 100 W, Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors in the provided information!) If you have further questions, we are happy to answer them by phone.

Gamybos metai: 2019, būklė: naudotas, Techninės detalės: Gjlou N Auujhcdwxeiw Valdymas: Sinterit Studio 2019 Open Įtampa: 220/50 V / Hz Bendras galios poreikis: 1,0 (maks. 1,8) kW Mašinos svoris apie: 90 kg Matmenys: 690 x 510 x 900 mm 3D spausdintuvas SLS lazerinė sistema: IR lazerinė diodė 5 W Maks. spausdinimo įstrižainės ilgis: 316 mm Flexa/TPE – didelis tikslumas, maks. spausdinimo tūris 110 x 150 x 250 mm PA – didelis tikslumas, maks. spausdinimo tūris 90 x 130 x 230 mm X/Y tikslumas: 0,05 mm Stalo dydis/darbo zona: 150 x 200 x 260 mm Integruota azoto kamera Azoto sąnaudos: 0,48 m³/val. Šildymo sistema su maks. kameros temperatūra: 200°C Priedai: Stiklo plokštė (lazerio apsauginis stiklas) 1x USB (programinė įranga pasiekiama), programinė įranga Sinterit Studio 2019 open, palaikomi formatai: STL, OBJ, 3DS, FBX, DAE, 3MF, operacinė sistema MS Windows Lemputės (24V infraraudonųjų spindulių šildytuvų rinkinys) Įvairūs buteliai su poliamido milteliais Įvairios smulkios dalys

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), Yra prieinama kombinuota plastiko detalių karštojo kniedijimo ir formavimo linija. Galia: 38 kW, valdymas: PLC, svoris: apie 1850 kg. Dokumentacija prieinama. Galima apžiūra vietoje. Golhjzfp H Ijcdwxoiw

Gamybos metai: 1992, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 24, Komp. Nr.: 551.3852 Spalvos: 6 Įranga / papildoma informacija: Sudaro: • Išdėliojimo įrenginys • Spausdinimo mašina • Puodelių kreiptuvai • Pakartotinio sukrovimo įrenginys Techniniai duomenys Spausdinimo agregato tipas: DW 200-230 Klišės cilindro diametras: 200 mm Maks. galimas spaudos vaizdo plotis: 110 mm Spaudos segmentų skaičius: 4 vnt. Maks. puodelio krašto diametras: 130 mm Min. puodelio krašto diametras: 70 mm (55 mm) Gelhcdwen D E A Texoiw Maks. spaudos vaizdo apvyniojimas (spec. klišės apvyniojimas): (361 mm) / D 115 Maks. puodelio aukštis: 130 mm Min. puodelio aukštis: 35 mm Maks. nuožulnumas: 10 laipsnių Gamybos greitis priklausomai nuo puodelio dydžio, kokybės ir žaliavų su UV džiovinimu: iki 24 000 vnt./val. El. prijungimo galia (mašina, džiovinimas, sukrovimas): apie 35 KVA El. valdymas su Siemens PLC / valdymo stotis su 2 eilučių ekranu Įtampa – 400 V, trifazis, su neutraliu laidininku ir įžeminimu. Dažnis – 50 Hz.

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 560037, Ref. No.: 451.4013 // No. 2620 Colors: 6 // Output: up to 36,000 cups per hour Equipment / Additional Information: Comprises: • Destacking unit • Printing machine • Cup guides • Restacking unit Max. cup rim diameter: 130 mm Min. cup rim diameter: 55 mm Production speed depending on cup size, quality and raw materials with UV drying: up to 24,000 cups/h (without positioning) With positioning: 12,000–15,000/h, depending on cup, format and tab. Electrical connection with dryer: approx. 26 kVA Electrical supply: 3 x 400 V, 50 Hz Air supply / consumption: 6 bar / approx. 50 m³/h Weight: approx. 7,800 kg Gielhcdwjhbvrnjxjw This machine has no positioning unit.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 957 h, įvesties srovės tipas: trifazis, bendras svoris: 600 kg, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, lazerio galia: 30 W, padavimo ilgis X ašis: 200 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 330 mm, važiuojamoji greitis (maks.): 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. Peripherals & Accessories For sale is a powerful and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: Very good, fully operational • Accessories and peripherals: complete and original EOS components _____ Technical data: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (Z-axis, depending on material) • Materials: PA12, PA11, TPU, and other SLS-compatible polymers • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / Material Management System • Machine weight: approx. 600 kg _____ Scope of delivery (complete system): • EOS Formiga P110 Velocis • Unpacking and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for economical operation) • Sandblasting cabin by Leering, type DI-12 (for professional post-processing) • Ruwac vacuum cleaner, type WS 200H Zone 22 ATEX (for safe handling of polymer powder) • 4x material containers • 2x build volume containers _____ Special highlights: • Very low operating hours (only 957 h) → almost as new condition • Complete, ready-to-use SLS system • High productivity due to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications • All accessories original EOS → perfect system integration _____ Fields of application: • Prototype production • Small series manufacturing • Spare parts & customized components If you have any questions or require further information, please feel free to send us a message or give us a call. A viewing is possible by appointment. Golhcdjy El Answxjiw

Gamybos metai: 2022, veikimo valandos: 998 h, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 031022210023, Wir bieten ein komplettes SLS-3D-Drucksystem bestehend aus der Sinterit LISA X SLS 3D-Druckmaschine, der Sinterit Powder Handling Station, dem Sinterit Sandblaster SLS sowie dem cadMIX Pulvermischer an. Details zur Sinterit LISA X 3D-Drucker: Lasertyp: IR Fasergekoppelter Diodenlaser, 30 [W]; λ = 976 ± 3 [nm], ausgelegt für > 30.000 Betriebsstunden Maximale Druckgröße diagonal: 398 [mm] (15,7 [in]) Maximales Druckvolumen: TPU-basiert / flexibles Material: 130×180×340 [mm] (5,1×7,1×13,3 [in]) PA / PP: 130×180×330 [mm] (5,1×6,7×13,3 [in]) Schichthöhe (min – max): 0,075 – 0,175 [mm] (0,003 – 0,006 [in]) Baugeschwindigkeit: bis zu 18,4 [mm/h] (0,72 [in/h]) Seriennummer: 031022210023 Herstellungsdatum: 05/2022 Ursprungsland: EU, Polen IEC Schutzklasse: Klasse 1 IP Schutzart: IP30 Maschinentyp: Selektives Lasersintern (SLS) 3D-Drucker Abmessungen (B × T × H): 650 × 610 × 1200 mm (25,6 × 24,0 × 47,2 in) Gesamtgewicht: 145 kg (319,0 lbs) Versorgungsspannung: 190–240 V AC Frequenzbereich: 50–60 Hz Leistungsaufnahme max.: 1650 W Stromaufnahme: 8 A Bemessungsspannung: 230 V AC Phasenanzahl: 1 Kurzschlussfestigkeit: 6 kA Gesamte Druckzeit: 998 Std. Weitere Informationen und technische Spezifikationen finden Sie in den beigefügten PDF-Dokumenten. Wir verkaufen das komplette System nur im Paket, kein Einzelverkauf. Gislsy Snn Hehcdwxow Das Setup wurde in der Slowakei gekauft. Beispieldrucke sind vorhanden. Eine Transportbox ist verfügbar. Der Drucker verfügt über ein offenes System; eine Modifikation der Parameter ist möglich. Bei Fragen oder Interesse kontaktieren Sie uns gern telefonisch oder per Nachricht.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Robotizuota CNC darbo stotis – SINUMERIK ONE Siūlome robotizuotą darbo stotį su pramoniniu robotu, kurio veikimo diapazonas yra 3000 mm, valdoma Siemens SINUMERIK ONE CNC sistema, skirtą plačiam taikymo spektrui: - šlifavimas - frezavimas - apdirbimas - didelio formato 3D spausdinimas - apdirbimas Darbo stotį galima išplėsti: - ruošinio padėties keitikliu - roboto linijiniu bėgiu, siekiant padidinti darbo zoną Tiekiame kaip „turn-key“ sprendimą, visiškai pritaikytą kliento specifikacijai. Roboto įrankių komplektacija visada projektuojama ir kainuojama pagal konkrečią aplikaciją. Tikslumas ir kinematika: Siūlome įvairias konfigūracijas priklausomai nuo reikiamo apdirbimo tikslumo. Mūsų sprendimuose naudojama MABI kinematika su tiesioginiu matavimu, leidžianti pasiekti didelį tikslumą net apdirbant tokius medžiagas kaip plienas. Gelhoy D N Acocdwxsiw Mažiau sudėtingoms aplikacijoms siūlome ekonomiškesnę Comau kinematiką, tinkamą, pavyzdžiui, medienos ir plastiko apdirbimui. Saugos sprendimai: - aptvėrimas su Haberkorn sistema - arba visiška darbo zonos uždanga.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Robotic Grinding Cell – CNC Control SINUMERIK ONE We offer a state-of-the-art robotic grinding cell for precise and efficient grinding, equipped with CNC control. The ideal solution for automating your production and ensuring consistently high surface quality. Main parameters: - Industrial robot with a reach of 3000 mm - Complete safety enclosure of the system - Control system: Siemens SINUMERIK ONE - Operator panel HT2 - 22" touch control panel for intuitive operation Programming and control: - Programming via NC code (CNC standard) - Workshop programming: - ShopTurn - ShopMill - Programming available via standardized CAD/CAM systems - Intuitive program creation directly at the machine – no CAM system required Grinding technology: - High-performance grinding spindle PushCorp (power selectable based on application) Expansion options: - Integration of a rotary table (positioner) - Expansion with a linear axis to increase the working area - Option to integrate a machining spindle with automatic tool changer system (ATC) - Customization for specific customer requirements Advantages: - High repeat accuracy and consistent grinding quality Gijlhcsy D Nwtedwxew - Combination of robotics and CNC control in a single system - Flexibility for grinding and subsequent machining in a single setup - Wide range of programming options (NC, workshop programming, CAD/CAM) - Simple operation thanks to workshop programming - Integration into Industry 4.0 concepts possible

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, bendras ilgis: 3 000 mm, bendras aukštis: 2 000 mm, garantijos trukmė: 12 mėnesiai, I am offering a robot-assisted 3D printer equipped with a CEAD extruder and Siemens Sinumerik One CNC control—a solution designed for large-format printing of molds, design elements, boats, laminating forms, and much more. The machine is manufactured in the Czech Republic and is supplied with on-site integration and training for the customer. Key features: Printing system: CEAD E25 extruder (up to 12 kg/h) or S25 (up to 24 kg/h) – selection according to customer requirements Robot arm: COMAU N-170 with a 3-meter reach and 160 kg payload capacity Control system: Siemens SINUMERIK ONE – full CNC control, with override functionality for process optimization Software compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: Brand new Optional accessories: Heated print bed for optimal adhesion and print quality Note: Software and heated print bed are not included as standard and are available as optional accessories. The listed price includes the CEAD E25 base extruder. Golhcowgkqtedwxoiw

Būklė: paruoštas naudoti (naudotas), Number of colors: 6, with paternoster feeder, operating hours: 33,213 h. Gjlhcdogggb Sowxeiw

Gamybos metai: 2023, veikimo valandos: 10 700 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Statybinis cilindras: 2× 400×400×520 mm Skenavimo greitis: 15,2 m/s Skaitytuvas: Didelio tikslumo trijų ašių skaitmeninė galvo sistema Lazeris: CO2 lazeris, 1×100 W Maksimali kameros temperatūra: 190°C Svoris: apie 3.000 kg Įskaitant azoto generatorių Įskaitant šaldytuvą Giolhjn Dxbyjcdwxew Įskaitant išpakavimo stotį

Būklė: naudotas, Gamybos metai: 2000, Machine Offer Manufacturer: OMSO Model: DM 385/6 BOX Year of manufacture: 2000 Operating hours approx.: 31,950 Number of printing stations: 6 Golhjw D R Aqecdwxoiw Number of color units: 6 Number of bottom printing stations: 2 Number of bottom color units: 2

Gamybos metai: 2022, veikimo valandos: 5 450 h, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, 3D printer, fully functional. Various additional nozzles included. Includes a robust, powder-coated Prusa print bed. Right extruder has seen very little use. Overall condition is good. Printer is ready for collection at any time. Gsloyim Dkjhcdwxeiw Printer specifications (non-binding): The Raise3D Pro3 is a professional FFF dual-extruder 3D printer with a build volume of 300x300x300 mm (255x300x300 mm in dual mode). It features an enclosed build chamber, nozzle temperatures up to 300 °C, automatic bed leveling, and is designed for materials such as PLA, ABS, PETG, ASA, and TPU. Key technical data for Raise3D Pro3: Printing technology: FFF/FDM (Fused Filament Fabrication) Print head: Dual extruder with electronic lifting system (quick swap) Build volume (W x D x H): Single: 300 × 300 × 300 mm Dual: 255 × 300 × 300 mm Device dimensions: 620 x 626 x 760 mm Maximum temperature: Nozzle: Up to 300 °C Print bed: Up to 120 °C Print speed: 30 to 150 mm/s (standard), HS version (Hyper Speed) up to 300 mm/s Layer resolution: 0.01 mm – 0.25 mm (depending on nozzle) Nozzle diameter: 0.4 mm (standard), optional 0.2, 0.6, 0.8, 1.0 mm Filament diameter: 1.75 mm User interface: 7-inch touchscreen (1024 x 600) Connectivity: Wi-Fi, Ethernet Slicer: ideaMaker Features: Automatic 9-point bed leveling, resume print after power loss, air filter The Raise3D Pro3 is suitable for industrial use, prototyping, and small-batch production. The Pro3 Plus version offers an increased Z-axis height of 605 mm.

Gamybos metai: 2006, būklė: geras (naudotas), 8 spalvų Polytype BDM 611 puodelių spausdinimo mašina Įskaitant: Uviterno UV sistemą; Corona, Arcotec priešapdirbimas. * Talpa: 36 000 puodelių/val. * Min. puodelio skersmuo: 60 mm * Maks. puodelio skersmuo: 130 mm Gslhcdwsn Utctjxsiw * Maks. puodelio aukštis: 160 mm Ši puodelių spausdinimo mašina jau išardyta ir paruošta transportavimui (vieta: Waalwijk, Nyderlandai)