Plačiajuostės šlifavimo staklės, darbinis plotis 1300–1499 mm pirkti naudotą (126)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Working width: 1300 mm Workpiece height - max.: 3 - 140 mm Control system: Xinje XD5 Partial taper length - min./max.: 200 - mm Total power requirement: 13.4 kW Machine weight: approx. 4.5 t Space requirements: approx. 5.1 x 2 x 2.3 m This brush sanding machine is in very good condition, immediately available, and can be inspected under power at the seller’s premises. DESCRIPTION: - Minimum part length: 200 mm - The machine is designed for sanding flat single parts for kitchen cabinets, windows, doors, furniture, etc. - Modular control of individual unit modules to meet customer requirements. - Frequency inverter for speed control of the motors in each module. - Each unit can be easily pulled out for maintenance and for changing the sanding paper and brushes. - Electrically adjustable working height from 3-140 mm via control system - Oscillating compressed air at the exit area Crodpfxjylp A De Af Aeb Miscellaneous: - Ball bearings, drive belts, and brush drive chains were replaced in June 2025

Būklė: naudotas, Apdirbimo plotis apie 1.300 mm Šlifavimo agregatų skaičius: 2 vnt. Maks. ruošinio storis: apie 150 mm Variklis: 18,5 ir 15 kW Csdpfxjypwaro Af Aorb Plataus juostos šlifavimo staklės Kündig ENORM 1300-2, skirtos tiksliam masyvo, faneros ir medžiagų kalibravimui bei šlifavimui. Tvirta pramoninė konstrukcija su dviem šlifavimo agregatais ir valymo šepetėliu leidžia pasiekti didelį pašalinimo našumą ir tikslų paviršiaus lygį baldų ir interjero gamyboje. Idealiai tinka aukštos kokybės reikalavimus turintiems amatininkams ir pramoninėms įmonėms, įskaitant šlifavimo juostas.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table Csdpfogr Er Ssx Af Aorb 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW 4th unit: Pneumatic pad Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, šlifavimo aukštis: 150 mm, darbinio aukščio: 150 mm, aukščio reguliavimo tipas: elektrinis, ruošinio aukštis (maks.): 150 mm, - Condition: very good - Year of manufacture: 1993 Crsdpfx Afow H Sk To Ajb - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL SPECIFICATIONS: - Working sanding width: 1350 mm - Max. thickness of sanded workpieces: 150 mm MACHINE CONFIGURATION: I - Cross-unit aggregate with electronic sequential pressure - Main motor: 13 kW - Pneumatic photocell oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II - Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pressure pad - Pneumatic photocell oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTOCELL OSCILLATION - Pneumatic cleaning strip system with oscillation for cleaning belts III - Combination unit with pad - Main motor: 13 kW - Belt cleaning system - Pneumatic pressure pad - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV - Brush cleaning unit, located after main aggregate at outfeed - Motor: 1.1 kW - Extraction outlet: 1 x 140 mm - Feed adjustable by gear motor: 4 kW motor - Feed speed: 6 – 26 m/min - Air requirement: approx. 28 m/sec, 4340 m3/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for lacquer sanding and intermediate lacquer sanding - Dimensions (L/W/H): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 200 mm, bendras ilgis: 2 750 mm, darbinis plotis: 1 350 mm, šlifavimo plotis: 1 350 mm, bendras svoris: 3 580 kg, šlifavimo aukštis: 160 mm, įvesties srovės tipas: trifazis, šlifavimo juostos ilgis: 1 620 mm, ruošinio plotis (maks.): 1 350 mm, Wide-belt sander VIET Challenge 323B – after technical inspection, ready for operation. Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – VIET • Model – Challenge 323B • Working width – 1350 mm • Sanding thickness range – 3–160 mm • 3 sanding units: - First: calibration roller, made of hard rubber - Second: rubber roller with lower hardness, with pneumatic raise/lower function - Third: soft rubber roller, with pneumatic raise/lower function • All rollers diameter: 240 mm • Option for pneumatic raise/lower operation on the 2nd and 3rd rollers or manual mode with fixed set height • Main motors: 2 x 11 kW • Machine controlled via a touchscreen panel with the possibility to save various programs and settings as needed • Display with notifications for potential machine errors and faults • Infinitely variable conveyor feed speed – variator • Electronic indicator for the thickness of the sanded workpiece • Air jet cleaning system for sanding belts on the 2nd and 3rd sanding unit • Oscillation at limit switches (reliable) • Conveyor in very good condition Codpsx Nw Spsfx Af Asrb • Extension roller tables included • Thickness gauge for sanded material • Safety sensor to prevent feeding over-thick elements • Original paintwork • Sanding belt size: 2620 x 1380 mm • Extraction outlets – 7 pcs • Weight – 3,580 kg • Year of manufacture – 2002 • Complete documentation from manufacturer in Italian • Overall dimensions: 270 x 225 x 220 cm (L x W x H) Additional information: • Perfect, factory technical and visual condition • Presented photos show the actual condition of the item offered for sale • Possibility to start and inspect the machine on site • Auction price does not include VAT or transport costs Financing and transport: • We organize transport using MDD fleet, courier companies, or external carriers • Financing support available in the form of leasing or lease loan

Gamybos metai: 2004, būklė: geras (naudotas), Ta linia Costa jest na sprzedaż (dostępna od ręki). KKH-CCTT + CCTT 1350, rok produkcji 2004, praca dolna i górna. 266 kW, 504 A. 2 sztuki. Crodpfxjh Nqn Hs Af Asb 1 = walec stalowy 37 kW. 2 = walec gumowy 25 kW. 3 = stopa 17 kW, sterowanie elektroniczne. 4 = stopa 17 kW, sterowanie elektroniczne. Linia w bardzo dobrym stanie.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, bendras svoris: 4 200 kg, Fine and smoothing sanding machine Heesemann, type: FGA 6 For intermediate lacquer sanding, wood fine sanding, and sanding of laminates/foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm (fixed) Maximum workpiece thickness: 3-80 mm Transport conveyor: With individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: Adjustable from 4.5 to 22 m/min Units: Brush roller unit: Central height adjustment Diameter: 150 mm Drive power: 1.5 kW Bristle type: Fibre Longitudinal sanding unit Infinitely variable, electronic adjustment of sanding belt speed via frequency converter Wear-free brake system Pneumatic belt tensioning Credpfxsya I Iuj Af Ajb Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Sanding belt speed: 0.3 – 12 m/s Drive power: 11 kW Graphical control terminal for entering machine settings, including numerical thickness adjustment and displays for faults, workpiece passage, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Workpiece vacuum clamping system: Fan motor power 5.5 kW Operation side and terminal: left Operating voltage: 400 V; 50 Hz Required space: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications subject to change and errors excepted. Subject to prior sale.)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, bendras svoris: 5 500 kg, darbinio aukščio: 880 mm, Wide belt sander with cross and longitudinal sanding units for sanding, among other things, veneer prior to lacquering. The machine is fully operational, well maintained, and in excellent technical condition. The feed belt has been replaced. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness: max. 3–140 mm Transport bed: With individual conveyor belts Drive: 3.0 kW three-phase motor, including blow-off device Feed speed: 4.5–22 m/min, adjustable Units: Cross/Longitudinal/Brush Brush roller unit: central height adjustment Diameter: 150 mm Drive power: 1.5 kW Bristle type: Fibre 1. Cross sanding unit: maintenance-free brake system, pneumatic belt tensioning, belt tracking control, segmented pressure pad system, intermittent belt cleaning device Abrasive belt dimensions: 4900 x 150 mm Belt speed: 12 + 24 m/s Drive power: 13 / 17 kW 2. Longitudinal sanding unit: Stepless, electronic control of belt speed via frequency converter, maintenance-free brake system, pneumatic belt tensioning, intermittent belt cleaning device, infrared belt control Abrasive belt runs counter to workpiece feed Belt size: 2620 x 1350 mm Belt speed: 0.3 – 12 m/s Drive power: 11 kW Graphical operating terminal for input of machine settings, including digital thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Distance between control rollers: 40 mm Pneumatic belt tensioning Crodjya I Rispfx Af Asb The pressure beam surfaces automatically adjust to the shape of the passing workpieces Weight approx. 5,500 kg Space requirement approx. 2550 x 2675 x 2400 mm

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimali storis: 3,0 mm Maksimali storis: 160 mm Maksimalus plotis: 1350 mm Minimalus ilgis: 250 mm Abrazyvinės juostos dydis: 1400x2620 mm Voleliai: 3 + 3 (guminiai) Paviršiaus valymo sistema su šepetėliu ir oru abiejose pusėse Maksimalus padavimo greitis: 20,5 m/min Gali dirbti 4 skirtingais režimais. 1. Abi mašinos – visi 3 voleliai varomi kiekvienoje mašinoje 2. Abi mašinos – tik paskutiniai du voleliai varomi kiekvienoje mašinoje Crodpsw A Ng Esfx Af Aeb 4. Mašina su viršutiniu kontaktu – varomi visi 3 voleliai arba tik paskutiniai 2 Tolerancija: 0,2–0,3 mm plokštei, kurios plotis 1250 mm Volelių konfigūracija: 1 mašina – apatinis šlifavimas Pirmas volelis: 18,5 kW, kietumas 60 Antras volelis: 15 kW, kietumas 40 Trečias volelis: 11 kW, kietumas 24 2 mašina – viršutinis šlifavimas Pirmas volelis: 18,5 kW, kietumas 60 Antras volelis: 15 kW, kietumas 40 Trečias volelis: 11 kW, kietumas 24 Mašina surinkta, galima bandyti.

Gamybos metai: 1995, būklė: labai geros būklės (naudotas), 2 grinding aggregates each with 22 kW motors Cleaning brush Variable feed speed control Vacuum extraction of the workpiece Crjdpfxjhxvi Eo Af Aob Powered roller discharge table

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4806170, šlifavimo plotis: 1 350 mm, šlifavimo juostos ilgis: 2 260 mm, ruošinio aukštis (maks.): 160 mm, šlifavimo juostos plotis: 1 380 mm, TECHNINĖS CHARAKTERISTIKOS Darbinis plotis: 1.350 mm Crsdpfoyzm Siox Af Aeb Šlifavimo juostos plotis: 1.380 mm Šlifavimo juostos ilgis: 2.260 mm Darbo aukščio intervalas: 3 - 160 mm ĮRANGA IPC valdymo sistema su spalvotu ekranu Programos padėtys gali būti saugomos terminale Visų reikiamų apdirbimo parametrų automatinis realaus laiko nustatymas Perfekuota guminė transporto juosta su įsiurbimu Išorinė nuoroda: MNA001

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, 1. plieninis volas, Ø140 mm 2. kombinuotas blokas – gumos volas ir elektroninė segmentuota trinkelė, EPS sistema darbo plotis 1100 mm, darbo aukštis 3–160 mm, juostos dydis 1900 x 1120 mm viso 30 kW – viso apie 1900 kg Codeym Rl Njpfx Af Aorb

Būklė: naudotas, Gamybos metai: 2006, 1. Kombinuotas agregatas su plieniniu volu ir elektronine segmentine padole darbinis plotis 1350 mm, variklis 15 kW, šlifavimo juostos dydis 2620 x 1350 mm tinka masyvo medienos, faneruotų bei lakuotų paviršių šlifavimui Codpfx Ajym Rdrof Ajrb galimas nuo 2026 m. kovo mėn.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, SCM Wide Belt Calibrating and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (hp) Feed gearbox motor: 0.45/0.8 (0.6/1.1) kW (hp) Feed speed: 4.5 / 9 m/min Standard equipment: - R140/85 rubber-coated calibrating roller, 140 mm diameter, 85 Shore – 1st position - R160/45 rubber-coated sanding roller, 160 mm diameter, 45 Shore – 2nd position - Hard sanding pad with manual working height adjustment - Motor power for 1st unit: 11 kW (15 hp) - Electronic ammeter for main motor current display Csdpfx Aotwqn Sef Ajrb - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds (4.5 / 9 m/min) with gearbox motor - Automatic belt tracking Including the following special accessories: 1 pc. Version “B” for RCS, including: pneumatic on/off switching of roller on 1st unit “R”, pneumatic on/off switching of roller on 2nd unit “CS”, “MESAR” elastic segmented sanding pad, pneumatic on/off switching of sanding pad unit, electronic programming unit “LOGIC 50”, electronic adjustment of working height 1 pc. CE safety compliance 1 pc. roller table at infeed and outfeed for long workpieces, fitted with 5 non-driven rollers 1 pc. “RA” skewed-ribbed steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. sanding belt wear optimizer 1 pc. LED internal lighting 1 pc. rear door with inspection window 1 pc. Logic SC control system

Būklė: naudotas, Gamybos metai: 2005, mašinos/transporto priemonės numeris: A41213AC1, Techniniai duomenys: - Gamintojas: Costa - Tipas: SA TS 1350 - Pagaminimo metai: 2005 - Darbinis plotis: 1.350 mm - Šlifavimo juostos matmenys: 2.620 x 1.380 mm - Šlifavimo aukščiai: 3–160 mm - Pado greitis: 5–25 m/min - 1-asis agregatas: - Išilginio šlifavimo agregatas - Juostos matmenys: 2620 x 1380 mm - Elektroninis šlifavimo batas, Costa sistema - Jutiklio volelio atstumas: 32 mm - Segmento plotis: 32 mm - Pagrindinio variklio galia: 11 kW - Dulkių šepetėlio skersmuo: 180 mm - Valdymo pusė: kairė - Aukščio reguliavimas: varikliu valdoma - Vakuuminis transporterio konvejeris - Bendra jungiamoji galia: 20 kW / 43 A - Plotis: 1.924 mm - Ilgis: 2.059 mm - Aukštis: 2.185–2.375 mm - Ištraukimo jungtys: D 2x100 mm + 2x160 mm - Oro srautas: 4.830 m³/h prie 24 m/s - Suspaustas oras: 6 bar, 880 NL/min - Įtampa, Hz: 400 / 50 - Įtampos svyravimai maks. +/- 5 % - Svoris: 3.100 kg - Vieta: sandėlyje Blomberg mieste Credpfx Afox Ex Tme Asb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 3 h, Funkcionalumas: visiškai funkcionalus, Machine barely used, like new, year of manufacture 2021. Table dimensions: 220x80 cm. Cedpfx Aoudy D Tof Aorb

Būklė: naudotas, mašinos/transporto priemonės numeris: 008400, Didžiausias apdirbamas plotis: 1350 mm Darbo stalas: fiksuoto aukščio Darbo agregatų skaičius: 4 vnt Credpfx Aoywafbef Asb

Būklė: naudotas, mašinos/transporto priemonės numeris: 007984, Didžiausias apdirbamas plotis: 1300 mm Mažiausias apdirbamas storis: 4 mm Darbo stalas: fiksuoto aukščio Vakuuminis konvejeris: taip Cedpfxewqdbme Af Aorb Darbo agregatų skaičius: 4 vnt

Būklė: naujas, Gamybos metai: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander including Intermediate Paint Sanding Configuration Special Price for Showroom Model - Trade Fair Machine - - Robust, space-saving wide belt sander for the highest demands - Consistent working height thanks to top section adjustment - Working width: 1350 mm - Top sanding, equipped with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller according to a sanding grit scale - Electric raising/lowering of the contact roller according to selected aggregate - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubber-coated pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Pneumatic belt tensioning, control, and oscillation Compressed air consumption approx. 2 l/min - Optimum safety due to automatic instant stop with disc brake in the event of belt breakage, etc. - Workpiece feed: 2.2 kW with transport belt and drive roller - Vacuum system for the entire worktable with additional 200 mm perforation for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with instant feed stop and automatic lift - Stepless regulation of material removal - Electronic feed speed control at the operator panel, stepless 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automated quick setup and feed release - Eco energy-saving mode - Fault diagnosis - Pass-through height 210 mm up to 18.5 kW Cjdpfx Ajk Dpp Sef Aorb - Sanding belt dimensions: 1350 x 2000 mm Perfect - Features: High quality, swiveling plexiglass control panel - 10" Touch Screen - Industry controller - Automatic pressure regulation and memory function of the sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counters Lacquer Configuration - Stepless adjustment of the sanding belt speed on the 2nd aggregate - Nozzles for automatic sanding belt cleaning on the 2nd aggregate - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without plate) C10) LED package ASB5+AS3) ECS workpiece air blast system with fan Location: 54634 Bitburg - Immediately available -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, bendras ilgis: 4 400 mm, darbinis plotis: 1 400 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Hello, we offer for sale a Heesemann LSM 8 wide belt sander in a configuration with four sanding units: cross-belt unit / longitudinal unit with calibration drum / longitudinal unit with reverse / longitudinal unit with de-dusting brush The machine has undergone mechanical refurbishment and inspection, checked and set up, ready for operation. Year of manufacture: 1997 Feed speed: 5-25 m/min – infinitely adjustable from the control panel Working height: 880 mm Workpiece thickness: 3-80 mm Power requirement: 107 kW – at full load Total weight: 10,250 kg Control: control panel with physical buttons and display Control and abrasive belt change side: right Single, perforated feed belts, perforated table with channel and vacuum fan – for safe transport of short workpieces. Element hold-down: rubber-coated rollers, diameter 70 mm. Abrasive belt Q unit: 5,400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed 12 m/s / 24 m/s "Sergeant" belt: 4,850 mm x 141 mm Longitudinal belt L unit: 2,620 mm x 1,450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Pressure: Hold-down beams with computer-controlled selective pressure adjustment – CSD® system for seamless, multi-row feeding with smooth adjustment of individual pressure elements. Controller roller reading distance: 16 mm. Codpfx Aju Hlzfsf Aorb Abrasive belts feature a cleaning system – air blast and dust extraction. Workpiece thickness tolerance compensation up to 2 mm via maintenance-free electromagnetic hold-downs. Working width as well as the start and end position of the sanding pressure beam are electronically controlled. Abrasive belt cleaning via blowing tubes; dust extraction via integrated extraction channels; air blast activation is automatic upon workpiece detection in the machine. At the end: cleaning/de-dusting brush, 150 mm diameter, with extraction channel for dust removal. Additional blow rotors at the machine outfeed with an extraction channel. Commissioning at your location and basic operational training – to be arranged. Price negotiable on request, machine available immediately.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, bendras svoris: 10 000 kg, įėjimo srovė: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding Width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base: Conveyor unit with a single transport belt; feed speed adjustable between 3 - 15 m/min via frequency control, including transport belt cleaning device. Constant working height of 920 mm; adjustment to various workpiece thicknesses (3 - 80 mm) by motor-driven adjustment of the upper machine section. Toothed belt cover for the lifting gear provides dust protection. Lifting gear toothed belt is monitored and controlled, integrated into the switch cabinet. 1. Cross Sanding Unit - Belt dimensions: 5,400 x 150 mm - Drive power: 13/17 kW - Sanding belt equipped with additional blasting tube for the belt cleaning device, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning blast device, belt running control. Includes door with glass insert. 2. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Drive power: 13/17 kW - Belt, in combination with double the number of blasting holes in the belt cleaning device, wear-resistant brake unit. Automatic compensation for differences in belt length, sanding belt runs against feed direction, intermittent dust blasting device, infra-red belt monitoring. Eccentric bearing for the front (steel) roller for light calibration; controlled via operator terminal. 3. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Belt speeds: 0.5 - 18 m/s - Drive power: 17 kW (frequency controlled) - Infinitely variable sanding belt speed, with twice the number of blasting holes in the belt cleaning device, wear-resistant brake unit, automatic compensation for belt length differences, sanding belt runs against feed direction, intermittent belt cleaning blast, infra-red belt monitoring. 4. Brush Roll Unit - Centrally height-adjustable; includes extraction hood and press-on roll. - Diameter: 150 mm - Drive power: 1.5 kW - Bristle type: fibre 5. Workpiece Suction Device - For secure transport of workpieces shorter than 500 mm in the feed direction, including integrated ventilator Voltage: 400 V, 50 Hz Belt Change: Left Control Terminal: Left 6. Ionization Bar (Top) - For removal of static charge, incl. high-voltage transformer 7. Workpiece Blasting Device with Rotating Compressed Air Nozzles (within the machine frame) The machine is ready for operation at your facility following a complete mechanical and electrical overhaul by authorized Heesemann service personnel. A new conveyor belt is fitted. Start-up and operator training at the customer’s location can be arranged. Transport costs are negotiable – loading is included in the price. If you have any questions, I am available. Paweł Szczepański Codpfx Asxp Hvnjf Aerb +48 795 517 258

Būklė: naudotas, Gamybos metai: 1998, Used machine Year of manufacture: 1998 1 Wide Belt Sander with Combination Unit Equipped with electronic segmented pressure beam For sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating carrier boards Sanding defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester finishes Sanding isolation foils With graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibration roller can be activated via terminal With patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency-controlled: approx. 2–18 m/sec Main sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air demand: 15 NL/min Belt blow-off: 490 l/min Extraction port: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Codpfx Afox Rpgho Asrb Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be fitted with a new feed belt Availability: by arrangement Location: Röllbach

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, bendras svoris: 2 500 kg, šlifavimo aukštis: 200 mm, The machine is equipped with the following processing units (additional details in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Grooved steel sanding roller 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Grooved steel sanding roller 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Sanding roller, 85 Shore hardness TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrical: 3x400V 50Hz CE compliant Vacuum table with blower: 4 kW (5.5 HP) Synchronization/reverse rotation function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) with SD start and sanding belt brake Touch screen control with color display Additional extraction connection Cjdpfjyub R Ejx Af Aorb Note: The machine is supplied without a power cable. The electrical connection must be provided on-site.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1990, Wide Belt Sander WEBER OFZ-2-1350 Working width: 1350 mm Number of heads: 2 1: Calibration roller with 18.5 kW motor 2: Pad unit with 11 kW motor Credpfsgm Tqwsx Af Ajb Electrically actuated sanding pad Cleaning brush Infinitely variable feed speed adjustment Machine weight: 2700 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Plačiajuostė šlifavimo staklės HEESEMANN LSM 8, pagaminimo metai 1997. Crjdpfexurxfsx Af Aob