Sąlyga: naujas, Touch - 7” colour display Cutting program input directly via touch screen Chalk line detection Operation according to stored program (100 program slots) 1x ejector unit (kicker) Hydraulic blade feed Machine compliant with CE standards Brake motor Safety cover on working area Including 1x TCT saw blade Saw motor power: 7.5 kW, 400 V, 50 Hz Saw blade diameter: 500 mm Feed system via toothed belt drive Feed speed: 120 m/min Cutting accuracy: +/- 0.8 mm Cutting capacity: up to 100 cuts/min Minimum workpiece length: 550 mm Minimum workpiece width: 40 mm Options: - Additional infeed table Isdpfx Asdify Isbksik - Additional outfeed table - TCT saw blade, 500 mm diameter

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Cross-cut circular saw with 2 double shafts. Vertical and horizontal axes. Suitable for cutting battens, slats, lamellae, and separation cuts. Features minimal kerf width. Maximum cutting height: 200 mm. Maximum cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed speed frequency-controlled from 0 - 40 m/min. 8 pairs of powered feed rollers. Pneumatic adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electric control cabinet with operator panel. Saw sleeves and tools included. Sound-insulated cabin. The machine is in excellent condition and has only seen occasional use. No visible wear on the feed rollers. Out of operation for the last 12 years. Mechanization: Infeed centering roller conveyor with adjustable feed gearbox. Discharge roller conveyor with integrated cross discharge conveyor. Both with adjustable feed gearboxes. Mechanization is of older type. Electric control cabinet with control panel. Multirip Saw Gubisch Grimme Crosscut multirip saw Multirip saw for lamellae Crosscut circular saw with 2 double shafts. Vertical and horizontal. Suitable for cutting battens, strips, slats, separation cuts. With minimal kerf. Cutting height max. 200 mm. Cutting width max. 200 mm. Clamping sleeves 150 / 160 mm. Horizontal saws 2 x 22 kW. Vertical saws 2 x 30 kW. Frequency-controlled feed rate from 0 - 40 m/min. 8 pairs of powered rollers. Pneumatic adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with control system. Saw bushings and tools. Sound-insulated cabin. The machine is very well maintained and was used only sporadically. No visible wear on the feed rollers. Has not been used for 12 years. Iisdpjx Ap Dzsfx Abkjk Mechanization: Infeed centering roller conveyor with adjustable feed gearbox. Discharge roller conveyor with integrated cross transferring conveyor. With adjustable feed gearbox. Mechanization is older. Electrical control cabinet with control system.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, Marke: Rema Modell: FX 550 Maschinennummer: 026 Baujahr: 2018 Siemens-Touchscreen Steuerung für Sägeblatt (Heben/Senken/Schwenken) und Parallelanschlag Iiodowdtzispfx Abksk Digitale Anzeige am Längenanschlag Technische Daten Schiebetischlänge: 3.900 mm Schnittlänge: 3.900 mm Schnittbreite: 1.400 mm Schnitthöhe mit 550-mm-Sägeblatt: 90° 120–200 mm, 45° 85–140 mm Hauptmotor: 6 kW Vorritzaggregat-Motor: 0,75 kW Anschlussleistung: 400 V, 50 Hz, 3~ Lager-Nr.: 2002350BXA

Sąlyga: naudotas, Felder Format 4 Kappa 450 Panel Saw Heavy-duty precision panel saw Scoring unit Motor: 5.5 kW Tilting saw blade 90 - 46° Electric angle and height adjustment Saw blade diameter up to 450 mm Cutting length: 3200 mm Cutting width with rip fence: 1200 mm Year of manufacture: 2005 CE compliant Machine from a closed joinery/due to retirement, in VERY GOOD CONDITION Direct from woodworking shop Iiedpjx H Nklofx Abkek

Sąlyga: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 4 300 mm, pjovimo plotis (maks.): 4 300 mm, pjovimo aukštis (maks.): 80 mm, For sale: a very good, reliable panel saw Format 4 Kappa Automatic KA75. This is actually a saw manufactured for Felder by MAYER, a machine with an excellent reputation, featuring a powerful and heavy-duty construction. The saw has been with me since 2012, working faultlessly on a single shift. Regularly serviced by Felder, it is well-maintained and, in my opinion, in very good condition—ready to serve its next owner for many years. Year of manufacture: 2011, installed in 2012 Cutting length: 4300 x 4300 mm Cutting height: 80 mm Main motor: 9 kW + scorer: 1.1 kW Motorized, stepless height adjustment (grooving) Cutting optimization: formatting 5 Selling due to replacement with a new Mayer. The machine has been serviced and dismantled by Felder and is awaiting a new owner. Iiedpfx Ajv Ibuyobksk Price: net

Gamybos metai: 1990, Sąlyga: labai geros būklės (naudotas), Double-head cross-cut saw STRIFFLER Cutting length: 2.2 m Iiodpfx Abeibyknsksk

Sąlyga: naujas, Bandsaw in compliance with European safety regulations, complete with: - Reinforced tilting grey cast iron table - Balanced cast iron flywheels Iisdpfodibw Ajx Abksk - Telescopic blade guard with rack and pinion mechanism - Blade tension indicator - Precision upper and lower blade guides - Cleaning brush on the lower flywheel - Stable aluminium fences - Maximum saw blade width: 16 mm - Extraction port mounted under the table, attached to the machine frame - Microsafety switches on the machine doors Table dimensions: 600 x 520 mm Table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./max. blade length: 3690 / 3742 mm Min./max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 250 mm, sukimosi greitis (min.): 3 250 aps./min, Dviguba kampinė pjovimo staklės Brevetti C15 Įrenginys skirtas pjovimui 45° kampu Skirta pjauti: dekoratyvinius rėmus, baldų durelių rėmus, stiklo tvirtinimo juosteles Ijdpfx Abjxyxhdjkjik Disko skersmuo max/min: 275/250 mm Pjūklo apsukos: 3250 aps./min Variklio galia: 2×1,5 kW Pneumatinis medžiagos spaudiklis Pneumatinis pjovimo agregato padavimas 2× ištraukimo jungtis 100 mm

Sąlyga: paruoštas naudoti (naudotas), 1 vnt. SCM CNC staklės 1 vnt. SCM plokščių pjovimo staklės 1 vnt. SCM CY7LEX CNC staklės 1 vnt. SCM briaunų klijavimo staklės Iiodpfx Ajx Hwgbsbksk 1 vnt. SCM briaunų klijavimo staklės

Sąlyga: geras (naudotas), Gamybos metai: 2005, Panel saw Schelling FMH580 Year of manufacture: 2005 Without lifting table Saw blade diameter: 450 mm Scoring saw blade diameter: 200 mm Max. saw blade projection above table: 125 mm Max. clamp opening: 113 mm Max. stack height: 110 mm Min. stack height: 15 mm Main saw motor power: 50 Hz, 19 kW Working height: 970 mm Iiodsq Apigepfx Abkok Overall height: 2070 mm Panel length / width: Fibre cement board max. 2500 / max. 1250 mm Plywood / chipboard / OSB panels: 2400–5600 / 1200–2600 mm

Sąlyga: naujas, Gamybos metai: 2024, ALL ALTENDORF F25 MODELS IMMEDIATELY AVAILABLE! Manual height and tilt adjustment 0–46° of the saw blade with digital display Drive power 5.5 kW Saw blade speed 3600/4200 rpm Double roller carriage, carriage length 3200 mm Iiedpsg Dgr Hjfx Abksk Mitre fence for cross cuts up to 3450 mm Max. saw blade diameter 315 mm, max. saw blade protrusion 104 mm Cutting height 100 mm, 70 mm at 45° Machine height 88 cm Note on used machines: • Technical data subject to error and prior sale. • Prices quoted are ex works – free loading at location. • Machines have been cleaned and functionally tested. • All machines are sold as viewed, without any warranty or guarantee. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries including your address and telephone number!)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 5 450 mm, pjūklo juostos plotis: 40 mm, įvesties srovės tipas: trifazis, pjovimo plotis (maks.): 180 mm, bendras svoris: 1 000 kg, Juostinis skersavimas su padavimu VENETA MACCHINE Papper Iedpfsxywiaex Abksik Ratų skersmuo: 800 mm Pjovimo plotis: 16–180 mm Didžiausias pjovimo aukštis su padavimu: 135 mm Didžiausias pjūklo juostos plotis: 40 mm Hidraulinė pjūklo juostos tempimo sistema Medžiagos tempimo juosta 2 viršutiniai tempimo volai Padavimo greitis Automatinis privažiavimas iki nustatyto matmens Greitas 4 išsaugotų programų pasirinkimas Variklio galia: 5.5 kW CE sertifikatas

Sąlyga: naujas, Formatinis diskinis pjūklas ALTENDORF F 35 Tipas 1 - 1000 Tvirtas, galingas, didelis pjovimo aukštis – idealus masyvo medienai! - Nauja įranga - pristatymas iš karto - Variklio galia 7,5 kW, 400 V, 50 Hz, 3 sukimosi greičiai Variklio valdoma pjūklo aukščio ir pasvirimo reguliavimas Didelis apsauginis gaubtas Iodpfx Ajxtbtpebksik Dvigubas vežimėlis 3.200 mm Paruošta įpjovėjo integracijai Lygiagrečios liniuotės plotis – 1.000 mm Kampinis mitrinis liniuotė – 3.450 mm, be ilgio kompensacijos Stalviršio prailginimas/praplatinimas: milteliniu būdu dengtas paviršius Pjūklo pasvirimo kampas: 0 - 46 ° Vežimėlio ilgis: 3.200 mm Pjovimo ilgis: 3.100 mm Pjovimo plotis: 1.000 mm Pjovimo aukštis: 154 mm Maks. disko Ø: 450 mm Ekrano dydis: 15 colių Darbinio stalo aukštis: 910 mm Nusiurbimo atvamzdis: Ø 80 + 120 mm Įskaitant šias parinktis: M45102 Lygiagreti liniuotė 1000 mm Digit_X M64300 Priekinis atraminis volelis M99008 Šablonų laikiklis

Sąlyga: naujas, Technical Data: Deflection roller diameter: 800 mm Max. cutting height: 400 mm Max. cutting width: 780 mm Table dimensions: 580 x 810 mm Tilting table up to 15 degrees Max. blade width: 80 x 0.8 mm Saw blade length: 5380 - 5530 mm Motor: 11.0 kW, 400 V, 50 Hz Extraction port diameter: 2 x 100 mm Wheel speed: 680 rpm Extraction connection: 1 x Ø 100 mm + 2 x Ø 120 mm Compressed air connection: 6 - 8 bar Machine weight: approx. 850 kg Machine dimensions (L x W x H): 1550 x 950 x 2500 mm Design/Features: - Welded steel frame, fully enclosed - Pneumatic brake - Support table made of ground and grooved cast iron - Upper & lower blade guides with interchangeable inserts - Star-delta switch - Emergency stop button on the main control panel - Cutting height: 600 mm - Telescopic blade guard - Cast iron table tiltable by 20° - Saw blade cleaning device with diesel tank Iijdpjby U Dpjfx Abkjk - Fence with millimeter scale and magnifier - Blade tension indicator - Doors with key lock - Cleaning brush on the deflection rollers - Rip fence usable on both sides, cast iron - Cast iron deflection rollers, rubberized, balanced - Motor protection switch - CE compliant version CENTAURO Model RVP200 Feed roller height: 160 mm Counter-pressure roller fence height: 160 mm Variable feed speed: 1 - 21 m/min Pneumatic opening/closing of the feed Max. distance saw blade – feed: approx. 220 mm Max. distance saw blade – counter-pressure roller fence: approx. 200 mm CE compliant

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Cutting length: 2,000 mm Cutting width: 1,050 mm with manual adjustment and fine manual tuning Manual height adjustment of the saw blade Mitre stop, cross-cutting up to 3,200 mm Drive power: 5.5 kW with 3 speeds: 3/4/5,000 rpm Maximum cutting height: approx. 140 mm Iisdpsp Duwcefx Abkjk Maximum saw blade diameter: 400 mm CE Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, General: - Cutting width adjustment via handwheel on the front of the machine - Digital display for cutting width - Saw blade height and tilt adjustment via foot pedal - Digital display for saw blade height and angle - Scoring unit adjustable by electric motor - Crosscut table length stop with digital display - Foldable parallel fence - CE compliant Saw blade tilt up to 45.5° Maximum cutting height: 145 mm Maximum saw blade diameter: 450 mm Cutting width: 1250 mm Saw blade speeds: 2800 / 4000 / 5500 rpm Motor power: 5.5 kW Extraction port diameter: 120 mm Edging length: 3300 mm Includes operating manual Includes tools Dimensions (L x W x H): 3300 x 3800 x 1400 mm Weight: approx. 1365 kg Note regarding used machines: • Changes in technical data and prior sale reserved. • Prices quoted are ex location, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as-inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements must be made in writing only. (Enquiries will only be answered if you provide your address and telephone number!) General: - Cutting width adjustment via handwheel on the front of the machine - Digital display for cutting width - Saw blade height and tilt adjustment via foot pedal - Scoring unit adjustable by electric motor - Crosscut table length stop with digital display - Foldable parallel fence Ijdpemmb Acjfx Abksik - CE compliant

Sąlyga: naujas, Equipment: - 5-axis electronic control - Swiveling control panel over the table - Electronic adjustment of the scoring unit - Automatic parallel fence adjustment with spindle and linear ball bearing guide - Start/stop switch integrated into the outrigger table - “Quick Lock” crosscut frame, longitudinal fence with LCD displays “Full Support” - Sliding table with curved contact surfaces - 10-year warranty! - Telescopic arm with linear guide and ball bearing guidance Technical specifications: - Main saw blade diameter: 550 mm - Scoring blade diameter: 120 mm - Panel cutting length with extendable stop: 3200 x 3200 mm - Tilting range: 0 to +46° Iiedpfx Abocrnm Nskek - Max. cutting height at 90°: 200 mm - Max. cutting height at +45°: 130 mm - Saw blade speed: 2500, 3500, 5000 rpm - Scoring blade speed: 8500 rpm - Extraction port diameter: 120 & 100 mm - Main motor power (50 Hz): 7.0 kW - Scoring unit motor power (50 Hz): 1.3 kW - Cutting width with parallel fence: 1500 mm Including the following OPTIONS: 570335 “Pro-Lock” system for fast clamping of the main saw blade with quick-release riving knife adjustment (no tools required)

Sąlyga: naujas, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALES ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer’s warranty. Pro Drive control system: - 3.5" color screen with separate keyboard - Automatic dimension correction at the rip fence and mitre fence when tilting the saw unit - Easy axis calibration - Machine diagnostics, operating hours counter, USB interface Iisdpjiz Aufefx Abksk - Recall of last input dimension (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the rip fence - 400V / 50Hz - Europe, Scale: Scale in mm - Electromotoric height and tilt adjustment 0–46° for the main saw blade, with automatic height correction when tilting the saw unit - Machine height 910 mm (standard configuration) The F 45 control panel is positioned at eye level, allowing convenient activation of all axes and keeping all settings in view. The single-handed operation of the swinging device is easily accessible from the operator’s position in front of the machine. Another advantage: the smooth machine front ensures nothing is in your way. INCLUDES OPTIONS: - M62003 Template holder - M64080 Increased cutting height with max. saw blade projection of 204 mm - M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor - M24030 2-axis scoring unit with electromotoric height and lateral adjustment - M24037 LED lighting for the scoring area - M41010 Table extension 840 mm - M34204 Double roller carriage, carriage length 3200 mm - M44404 Angle-mitre fence, crosscuts up to 3500 mm - M44443 CNC rip fence, cutting width 1300 mm - M44450 Front support roller - M37003 On/off switch on double roller carriage Note on used machines: • Technical details and intermediate sale subject to change. • Stated prices are ex works – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if in writing. (We only respond to inquiries with your address and phone number!)

Sąlyga: naujas, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and lift. Cast iron saw unit ensures torsional rigidity and vibration-free operation. Facilitated panel feed thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – the sliding table is guided precisely and smoothly using a long-proven ball contact system. Scoring unit is equipped with its own drive and is easily adjustable from the outside. Saw unit accommodates blade diameters up to 400 mm. Scoring saw blade diameter: 160 mm. 2-position manually adjustable saw blade guard. 3-axis control system. Motorized rip fence with electronic positioning. Includes: - Position display via encoder - Adjustment via ball screw - Stepless adjustment via switch or automatic positioning system - Incremental adjustment possible - Fence swiveling mechanism under the table - Cutting width: 1270 mm - Programmed movement of motorized adjustment and tilting for the saw unit UP version: - With swiveling control panel for maximum flexibility X version: - With Compex miter fence for quick and precise execution of miter cuts, with automatic stop position compensation (length compensation) - Extension arm with angle-adjustable telescopic crosscut fence - Optional degree scale division (Part No.: 5510403) - Rip fence with 2 LCD displays for fence position Includes options: - Version with max. sliding carriage travel 3200 mm - Integrated on/off switches for main saw blade and scoring unit motors in squaring carriage - Squaring frame with CompeX device - Version "READY 3 UP" - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Iijded Akygopfx Abkjk Sliding table width: 360 mm Cutting width with rip fence: 1270 mm Max. crosscut width left of saw blade: 3260 mm Saw blade tilt: -46° to +46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Max. cutting height at -45°: 60 mm (Main) saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Sąlyga: naujas, SCM gabbiani p90 Panel Saw – Showroom Machine – Special Offer! Technical Specifications: Iiedpfx Asiz A Amjbksk Saw blade projection: 90 mm Working table height: 950 mm Standard number of grippers: 5 Cutting dimensions: 3300 x 3200 mm Variable saw carriage speed: 6–60 m/min Variable pusher speed: 0–60 m/min Saw blade motor power: 7.0 kW Rotation speed: 4650 rpm Saw blade diameter: 340 mm Main saw spindle diameter: 80 mm Scoring unit motor power: 1.5 kW Rotation speed: 5850 rpm Scoring blade diameter: 200 mm Scoring spindle diameter: 80 mm Compressed air requirement: 300 NL/min Compressed air pressure: 7.0 bar Extraction air requirement: 2440 m³/h Extraction air speed: 20 m/sec Extraction connection diameter: 4 x 120 mm Including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M operating console with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: Pre-installation for later retrofitting (without "gateway") OF0457 Human-Machine Interface (HMI) software MAESTRO ACTIVE 590258 Rear table with rollers, on the longitudinal fence side 590246 Fixed air-cushion table 2500x800 mm with rollers and reinforced fan 590239 2 x Movable air-cushion tables 1500x600 mm with rollers and reinforced fan 590244 Saw carriage with independent lifting control for main and scoring saw blades 590245 Optimized two-stage vertical lift of the saw blade (medium/maximum) 590143 Grooving unit with manual blade height adjustment 590241 Grooving function (feed/return of saw carriage) 590164 Double automatic lateral alignment device 301230 Foot switch for starting and stopping the work cycle 590044 Compact labelling unit – prints labels with barcodes 590144 4 x Additional grippers 900088 Magnetic tape monitoring for pusher position 102015 European safety standards (CE marking) 109993 MACHINE LANGUAGE: German

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Veneer saw / precision saw Brackets for rear support table Pneumatic pressure beam control Extraction duct Cutting length: 3050 mm Cutting height: approx. 50 mm Motor power: 2.2 kW, 400 V, 50 Hz Saw blade diameter: approx. 180 mm Dimensions (L x W x H): approx. 3800 x 1000 x 1200 mm Note on used machines: • Technical details are subject to errors and prior sale. • Listed prices are ex-works, loaded free of charge. • The machine has been cleaned and functionally tested. Isdpfx Asv D I Uxjbkoik • All machines are sold as inspected, without any guarantee or warranty. The buyer is free to inspect the machine at its location. • Special agreements are only valid in written form. (We only answer inquiries with your address and telephone number!)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Engine power: 1.5 kW Saw blade speed: 2800 rpm Saw blade diameter: 250 mm Iodpfxeulzcho Abkjik Saw blade bore: 30 mm Cutting length: 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees: 230 mm Cutting depth: 65 mm Arm swivel lock: +/- 45 degrees Weight: 140 kg Motor protection switch Brake motor Emergency stop switch CE compliant Including dust collection hood for extraction connection, diameter 120 mm Note for used machines: • Errors in technical specifications and intermediate sale excepted. • All prices are ex location and quoted as pickup prices – free loading! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and phone number!)

Sąlyga: labai geros būklės (naudotas), Multi-blade saw Max. cutting width: 310 mm Chain width: 340 mm Max. feed opening / entry width: 650 mm Max. cutting height with Quickfix clamping flange: 110 mm Saw spindle diameter: 65 mm Min. workpiece length: 500 mm Max. feed speed: 35 m/min, variable Main motor power: 22.0 kW, 400 V, 50 Hz Feed motor: 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max.: 300 / 350 mm Working height: 850 mm Extraction port diameter: 250 mm Required extraction volume: 5,300 m³/h Iodpstwy Iuofx Abkoik Features: - Quickfix saw blade mounting - Electrically adjustable saw spindle height - Electrically adjustable pressure unit height Dimensions (approx.) L x W x H = 1,750 x 1,750 x 1,500 mm Weight: 1,850 kg Included options: - Oil level monitoring - SafetyPlus - Quickfix Note for used machines: • Subject to technical changes and prior sale. • All prices are ex works – free loading! • The machines have been cleaned and tested for functionality. • All machines are sold as inspected, with no guarantee or warranty implied. The buyer is free to inspect the machines on site. • Special agreements are only valid in written form. (We reply to enquiries only with your address and telephone number!)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping tongs: 8 pcs. Saw carriage height adjustment on THK linear guides Pressure beam with slots (through-feed) Side aligner Pneumatic quick-change saw blade system Extraction port diameter: 1 x 120 mm & 1 x 150 mm Machine dimensions (L x W): 5,700 x 6,000 mm Weight: approx. 2,500 kg INVERTER NEW Notice for used machinery: • Technical specifications and prior sale subject to change. Ijdpfx Abohvan Iokjik • All prices are ex-works, loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect machines at our site. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Sąlyga: naujas, Supercut 80 – The ideal solution for highly precise cutting of thin boards up to 2 mm thick Roller diameter mm: 800 Max. cutting height mm: 400 Fixed worktable mm: 1290 x 800 Max. saw blade width mm: 54 x 0.9 Max. and min. blade length mm: 5530 / 5380 Motor power kW: 15 (HP 20) Extraction hoods No.: 2 x Ø 120 & No. 1 x Ø 100 Compressed air consumption (for wheel braking and feed unit roller opening) bar: 6 / 27 liters Isdpfx Abedcd Dlekeik Net weight kg: 880 Feed rate m/min: 0 - 30 Feed conveyor belt height mm: 300 Conveyor stop length mm: 750 Roller diameter mm: 160 Max. roller opening from blade mm: 200 Max. stop opening from blade mm: 200 Infinitely variable feed speed m/min: 0-30 Voltage: 400V / 50 Hz Standard Equipment: - Manual width guide with cutting thickness indicator - Pneumatic/hydraulic control for automatic blade tension adjustment - Optical sensor for detecting the cutting cycle - 7″ touchscreen electronic control - 6 height-adjustable feed rollers with pneumatic pressure system - Central saw blade lubrication system - Chip extraction also in the worktable - Extendable cutting length up to 500 mm - Upper and lower CHACO saw blade guide - Manufactured according to CE standards