Medžiagų bandymai pirkti naudotą (499)

Būklė: labai geros būklės (naudotas), Here we offer you a Köhler salt spray chamber. Köhler salt spray chamber corrosion test chamber Köhler salt spray chamber HKT 500 Operation via touch panel Internal dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber ambient temperature up to 50°C Power supply: 230V 1P/N/50Hz 3000W Type: HKT 500 WTG Weight: 400 kg Condition: used Bdsdpfxezd Ux Te Alwsg Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Espec (ThermoTec) Stress Test Chamber We are offering an Espec (ThermoTec) Stress Test Chamber. Overpressure humidity tests above 100°C in various modes. Program capacity of 10 patterns with up to 30 steps per pattern. A variety of protection mechanisms: overheating/overpressure protection, water supply failure detection, fully lockable door, and temperature sensor. Saturated temperature range: 105 to 142.9°C Unsaturated temperature range: 105 to 132.9°C Humidity range: 50 to 100% r.h. Nominal pressure: 0.196 MPa at 132.9°C and 100% r.h. External dimensions: Width 740 x Height 1553 x Depth 1000 mm Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm Other features: - Supplied with rails and grid - Test item connections inside the chamber - Type: EHS-221M - Scope of delivery: See images Weight: 300 kg Condition: Used Bjdpfx Alozd Uy Dowedg Scope of delivery: (See image) (Subject to technical modifications and errors. All data subject to change!) For further questions, we will gladly assist you by phone.

Būklė: labai geros būklės (naudotas), Vötsch Model: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 900 mm x Depth 1550 mm x Height 1850 mm Temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: Cooling 7.5 K/min Test chamber volume: 190 liters Rated voltage: 400V Bdedpfozfg Ucjx Alweg Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerants: R404A and R23 For your security as a buyer, please note the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical specifications!) Should you have further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Here we offer a temperature shock test chamber with a 100-liter test volume, suitable for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Bdjdpfxezfg Upe Alwsg Automatic defrost Overtemperature protection Operating hour counter Mobile version 2 stainless steel test baskets Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Type: TSD-100 Condition: used Scope of delivery: (See picture) (Technical details subject to change and errors excepted!) For further questions, we would be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), CTS TSS-70/130 Temperatūros šoko bandymų kamera Gamintojas: CTS Clima Temperatur Systeme GmbH Tipas: TSS-70/130 Mašinos tipas: Temperatūros šoko bandymų kamera / Temperatūros bandymų kamera Bandymų tūris: apie 130 litrų Parduodama naudota temperatūros šoko bandymų kamera, pagaminta CTS. Įrenginys tinkamas temperatūros šoko, kintamos temperatūros, medžiagų, elektronikos bandymams, kokybės kontrolei, moksliniams tyrimams ir plėtrai. Techniniai duomenys Karštoji kamera: +50 °C iki +200 °C Šaltoji kamera: -80 °C iki +100 °C Temperatūros pokyčio greitis: maks. 100 K/min (vidutiniškai) Perjungimo laikas: < 10 s Temperatūros perskirstymo greitis: ≤ 15 min diapazone nuo -65 °C iki +200 °C Įkaitimo greitis: apie 6 K/min Atvėsimo greitis: apie 4 K/min Laiko temperatūros nuokrypis: ±1 K Erdvinis temperatūros nuokrypis: ±2 K Išoriniai matmenys (apie): 2335 x 940 x 1820 mm (P x G x A) Įvežimo matmenys (apie): 1990 x 940 x 1652 mm (P x G x A) Bandymo kameros vidaus matmenys (apie): 480 x 660 x 410 mm (P x G x A) Langas: apie 300 x 300 mm Svoris: apie 950 kg Elektros jungtis: 400 V 3/N / 50 Hz Galia: apie 16,6 kW Nominali srovė: apie 28,0 A Bdedpfx Ajzf Ibkolwog Apsauga: 32 A lėta Apsaugos klasė: IP22 Šaldymo medžiaga (pirmas etapas): R404A, 4,0 kg Šaldymo medžiaga (antras etapas): R23, 0,6 kg / 10 bar Darbinis viršslėgis PS: 25 bar Darbo sąlygos Vandeniu aušinama konstrukcija Reikalingas aušinimo vandens prijungimas Reikalingas suspausto oro prijungimas Darbas galimas tik su vandeniu ir suspaustu oru Aušinimo vandens įvadas: 3 - 6 bar Įranga CTS valdymo pultas Mikroprocesorių valdomos reguliavimo ir stebėjimo sistemos Programinis režimas Skaitmeninis nustatytos ir esamos reikšmės rodymas RS232 sąsaja RS485 sąsajos Potencialo laisvas kontaktas Skaitmeniniai įėjimai ir išėjimai Karštoji ir šaltoji kameros Riedantis vežimėlis su kėlimo sraigtiniu pavara Bandymų kamera / vežimėlis iš nerūdijančio plieno Įdėjimo krepšys iš nerūdijančio plieno vielos Vamzdžio pravedimas NW 50 su uždarymo kamščiu Suspausto oro prijungimas 1/4" išorinis sriegis Kondensato nutekėjimas R 1/2" vidinis sriegis Saugos durų užraktas Rakinamos durys su apžiūros langu Komplektacija 1x CTS TSS-70/130 temperatūros šoko bandymų kamera Įdėjimo krepšys / bandymo kameros įranga Turimi dokumentai / literatūra Eksploatacijos instrukcija Priedai pagal nuotraukas Būklė Naudota Išvaizda pagal nuotraukas Prietaisą galima įjungti Komplektacija kaip pavaizduota. Techniniai duomenys ir jų kitimo ar pardavimo teisė pasilieka.

Būklė: labai geros būklės (naudotas), Vötsch Type: LTU 60/60 Heraeus Vötsch Dryer for Coating Materials Maximum concentration of flammable substances: 40% of the Lower Explosion Limit (LEL) Maximum heating surface temperature over 750°C Device Description: Technical Data: Internal volume (usable space): 0.216 m³ Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Total width 796 mm, Height 1725 mm, Depth 850 mm Loading / Load capacity Roller conveyor total: 55 kg Loading height above floor level: 820 mm Weight (net): 275 kg Minimum exhaust air volume flow: 96 m³/h Purging time (5 air changes): 90 sec Recirculated air volume flow (reinforced): 33 m³/h Total steam chamber volume: 0.414 m³ Sound pressure level (according to DIN 45635): < 70 dB(A) Shut-off temperature Temperature limiter (TB) fixed setting: 300°C Adjustable temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB): 1 Temperature selector limiter (TWB): 2 Bjdpjzg Tppsfx Alwsdg Nominal temperature: 200°C Electrical Data Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data. Specifications are subject to change!) Should you have any further questions, we would be happy to answer them for you by phone.

Būklė: geras (naudotas), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 (-55 to +140°C) Shaker: Vibration Exciter: 4x LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation Modes: Sine / Random / Shock / Real-Time Profiles Force Vector per Shaker: 2.9 kN (Peak Sine) / 1.9 kN (RMS Random) / 4.6 kN (Peak Shock) Maximum Payload: 100 kg per shaker Acceleration: max. 44 g RMS / 66 g Peak Velocity: max. 0.7 m/s Stroke Amplitude: max. 25.4 mm p-p (1 inch) Frequency Range: 5…4000 Hz Fixture Area for Test Specimens: 1000 x 1000 mm aluminum profile frame Bsdpfx Aozg Tv Njlwsdg Special Features: The four shakers can be operated synchronously or asynchronously with the MIMO controller. With the aluminum profile frame, a fixture area of 1x1 m² is achieved for large test specimens. Without the profile frame, mobile use as a modal shaker for large items such as complete vehicles is possible. The lightweight vibration components of the shakers enable excitation frequencies up to 4000 Hz. Weight: 2000 kg Climatic Chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / Monoblock, welded Dimensions (mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8 m³) External without base frame: 2,340 3,600 2,800 External with base frame: 2,340 3,600 3,800 Aggregat external: 1,200 2,400 2,200 Door: 2,000 2,000 2 pcs test chamber windows in door: 460 x 460 Weight: 4,500 kg Insulation: 140 mm PU, CFC-free, B1 to DIN 4102 Outer cladding: 0.6 mm steel sheet, painted to RAK 7035 Temperature range: -55 °C to +140 °C Temperature constancy: ± 0.5 K over time Climatic range: +10 °C to +95 °C Humidity range: 10% to 95% RH Refrigerant R404A 29 kg Total weight: 6,500 kg Condition: used Scope of delivery: (see photo) Sample images! Current images to follow! (Changes and errors in technical data and specifications excepted!) For further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Cooling Unit: Air-cooled, low-noise, fully hermetic with stepless capacity adjustment via electronic monitoring and control system. Uses environmentally friendly refrigerant R404A. Door: Fully opening door, left-hand hinge, one-handed operation, lockable. Rack: Stainless steel, support surface 970 x 980 + 500 mm. Maximum load per rack: 35 kg. Maximum total load with full racking: 100 kg. Test Chamber Illumination: 3x halogen lamps, 20 W, 12 V. Control: 32-bit controller. LCD control panel. Digital display of set and actual values. Numeric input of set values. Plain text error messages. RS 232 interface. Free switching channels for customer-side specimen control. Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Pipe lead-through NW 50 Control Panel Window: 570 x 710 mm Electrical connection, cable length: 5m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 1.5 K/min Heat Emission: Approx. 2500 W at +20°C Approx. 2100 W at 0°C Approx. 1500 W at -20°C Technical data refer to ambient temperature of +25°C, rated voltage 400 V, without test specimen, without heat radiation, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions (internal): Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operational Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain: non-pressurized, R 1/2" internal thread Sound pressure level (measured per DIN EN ISO 3744, 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important information for your safety as the buyer! The following points are carried out on all chambers we offer, prior to sale: Bodpfxozg Twae Alwedg 1. Functional check and replacement of necessary components 2. If required, new fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and information!) We are happy to answer further questions by phone.

Būklė: geras (naudotas), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 13 m³ Bsdezg Tw Hopfx Alwodg External dimensions (WxDxH): approx. 2260 mm x 3850 mm x 2780 mm Test chamber (WxDxH): approx. 2254 mm x 2645 mm x 2251 mm Door opening (WxH): approx. 2251 mm x 2254 mm Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Būklė: geras (naudotas), RS Simulators Type: Walk-in Climatic Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95 % rH Humidity tolerance: +/- 5.0 % rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Bsdpfxszg Txke Alwjdg Technical Data – Solar Simulation: Control module: Mitronic STB1-8 Number of luminaires: 8 Ballast: Mitronic CP2k5 – 2ZS Ignition device: Hönle Lamps: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information subject to change!) If you have any further questions, please feel free to contact us by phone.

Būklė: naudotas, LDS Type: V875 Shaker System V875-440 with SPA40K Amplifier Vibration Exciter for Medium Forces Technical Data: Head Expander: 850 x 850 mm Armature Size: 440 mm Sine Force Vector: 35.6 kN (peak) Random Force Vector: 35.6 kN (rms) Shock Force Vector: 106.75 kN (peak) Frequency Range: 5 to 3000 Hz Maximum Specimen Mass: 600 kg Maximum Acceleration: 1078.7 m/s² Maximum Velocity: 1.8 m/s Condition: used Weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Scope of delivery: (see pictures) (Subject to changes and errors in the technical data and specifications!) Bdjdpfx Aozg Txwslwjg For further questions, please feel free to contact us by phone.

Būklė: naudotas, Vötsch Type: VCS 7034-5 Climate Test Chamber Water-cooled Test Chamber Volume: 335 liters Performance for Temperature Tests Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Change rate: Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20°C 3000 W / at -20°C 3000 W Temperature calibration values: +23°C and +80°C Performance for Climate Tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400W Climate calibration values: +23°C / 50% r.h. and +95°C / 50% r.h. Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following steps are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone. Bdsdjzg Tx Rjpfx Alwjg

Gamybos metai: 2022, būklė: labai geros būklės (naudotas), Dycometal Type: CCK -40/1500T Water-cooled climate chamber Volume: 1500 liters Internal dimensions: Height 1000 mm, Width 1000 mm, Depth 1500 mm External dimensions: Height 2200 mm, Width 1293 mm, Depth 3400 mm Thermal testing Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5°C to ±1.5°C Climatic test temperature range: +10°C to +90°C Humidity range: 10% to 98% RH Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Condenser: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW 27.5 A Bodpfozgr Rrjx Alwodg Refrigerant: R-452A Weight: 1120 kg Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Performance Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Temperature range: -72°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 Spatial temperature uniformity: ± 0.5 to ± 2.0 Rate of temperature change (cooling): 25 K/min Rate of temperature change (heating): 25 K/min Heat compensation at -20°C: 8000 W Bjdpfxszg Eyge Alwjdg Heat compensation at +20°C: 8000 W Test chamber volume: 270 liters 2x side ports ∅ 125 mm 1x side port ∅ 50 mm Chamber is water-cooled Chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerants: R-452A and R-23 Weight: approx. 980 kg Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional checks and replacement of necessary components 2. Refilling with legally approved refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Gamybos metai: 2011, būklė: labai geros būklės (naudotas), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control System: 32-bit Controller LCD Control Panel Digital display of set and actual values Numerical input of setpoints Plain text fault messages Interface: RS 232 Free switching channels for user-specific test item control Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: - Heating: 2 K/min - Cooling: 1.5 K/min down to -10°C Radiant heat output: approx. 1000 W at +20°C, approx. 200 W at -25°C Bsdpozd Rzwjfx Alwodg Nitrogen inertization with residual oxygen monitoring: The test chamber is first purged with a high volume of N2 until the oxygen content is below 3%. It then switches to a base level supply (approx. 10% of the full purge rate). Base level nitrogen flow is measured, displayed by a flowmeter, and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber through a flame arrester, directing it to an O2 sensor which checks the residual oxygen content. The gas is then returned to the chamber through a second flame arrester. The exhaust pump is monitored by a volume flow meter. Further details are available in the Dräger manual in the appendix. The gas system is currently deactivated! Technical data is based on an ambient temperature of +25°C, nominal voltage 400V, without test item, without radiant load, and without additional equipment. Dimensions: Test volume: 950 liters Test chamber dimensions: approx. 700 mm (H) / approx. 900 mm (W) / approx. 1500 mm (D) External dimensions: approx. 2400 mm (H) / approx. 1270 mm (W) / approx. 3125 mm (D) Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, 1/2" internal thread Sound pressure level: < 62 dB(A) (measured per DIN EN ISO 3744 at 1m distance from the front) Weight: approx. 1500 kg, control cabinet approx. 300 kg External refrigeration unit Refrigerant: R404A / R23 Important Safety Information for Buyers: The following steps are carried out in advance on chambers we offer: 1. Functional testing and replacement of necessary components 2. Recharging with legally compliant refrigerant if necessary 3. Leak test with certification 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information provided without guarantee!) If you have further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber We are offering a temperature test chamber for sale. Weiss Temperature Test Chamber, Water-Cooled Technical data: Model designation: WT-600/70 External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber capacity: approx. 600 liters Cooling / Heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Site circuit protection: 32 A slow-blow Permitted test specimen weight: Bjdozd R Drepfx Alwedg Total load on shelf supports: 80 kg Test chamber floor: 80 kg, Shelf rack: 40 kg Refrigerant: R 404A / R23 Weight: 675 kg Type: WT-600/70 Important safety information for you as a buyer: The following procedures are carried out in advance on our advertised chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After a successful check, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (We reserve the right to make changes and correct errors in the technical data and information provided!) If you have any further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0... ± 1.5 K/min Change rates - Heating: 2.0 K/min on average - Cooling: 2.0 K/min on average IEC 1646 standard testing is possible, including modules with a maximum weight of 160kg and non-linear ramps (setpoint jump). Drying - Air drying: condensation drying Humidity - Air humidification: steam humidification - Humidity range: 10...95% relative humidity - Temporal humidity deviation: ≤ ± 3.0... ± 5.0 % r.h. - Dew point range: 8...80.9°C Test chamber - Interior volume: 7.0 m³ - Interior dimensions: 1500 mm (W) x 2250 mm (H) x 2000 mm (D) - Hinged door DIN right, heated, with glass insert: 900 mm (W) x 2100 mm (H) - Viewing window, heated, with blackout panel and lockable: 500 mm (W) x 600 mm (H) - 2 feedthroughs in right front panel, Ø 75 mm Irradiation unit test chamber - 4 cutouts in left side wall for SC 2500, each 850 x 700 mm - Irradiated area when using SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0m wall distance: 1000 ± 10% W/m² - Lighting: 1x 200W halogen lamp Refrigeration unit - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: Split design (outdoor installation, winter control) - Refrigerants: R507 / R23 Temperature control system - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Cooling brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Max. radiation absorption: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Test chamber power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 32.0 kW - Supply line fuse: 3 x 63A, Type C SolarConstant power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 30.0 kW - Supply line fuse: 3 x 63A, Type C External dimensions of the test chamber complete with: Equipment room / control cabinet and control cabinet for SolarConstant 2500 - Equipment room external dimensions: 3440 mm (W) x 2580 mm (H) x 2950 mm (D) - Control cabinet: 2200 mm (W) x 1830 mm (H) x 1100 mm (D) - Split condenser external dimensions: 900 mm (W) x 950 mm (H) x 2000 mm (D) Total weight test chamber: approx. 2700 kg Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) Bedpszd Sdgofx Alwjdg We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32-Control Unit, Water-Cooled (Refrigerant converted to R-452A) Control Panel »Touchpanel« All control and operation commands can be executed simply by touching the function symbols on the control panel “Touchpanel.” Adjustable Feet To compensate for uneven floors and ensure proper ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on both the right and left sides, allowing measurement leads and testing equipment to be routed into the test space. Feedthroughs are included as standard equipment: R1: internal diameter 125 mm L1: internal diameter 50 mm Test Chamber Volume: approx. 335 liters Test Chamber Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Testing: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power: 4.1 kW Bdsdpszgbkhjfx Alwog External fuse: 16 A slow-blow Sound pressure level (approx.): Measured at 1m distance from front, 1m height: 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 Important Information for Your Security as a Buyer! The following measures are carried out in advance for all test chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, new filling with refrigerant in accordance with legal requirements 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photos) (Technical data subject to change and errors reserved!) For further questions, we are happy to assist you by phone.

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Vickers Type: HVS 1000 The digital micro Vickers hardness tester HVS 1000 features a unique and precise design across mechanics, optics, and light source, enabling it to deliver a clearer impression image and thus more accurate measurement. Main Purpose and Fields of Application: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet metal, microstructures 2. Carburizing, nitriding and decarburization layers, surface hardening layers, plating, coatings 3. Glass, wafers, ceramic materials Specifications: Model: HVS1000 Type: Digital Micro Hardness Tester Test Loads (N): 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test Loads (kgf): 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load Control: Automatic loading and release Turret (Objective/Indenter): Manual Dwell Time (s): 0~60 Microscope Magnification: 400x for measurement (Objective 40x, Eyepiece 10x); 100x for observation (Objective 10x, Eyepiece 10x) Micrometer Resolution (μm): 0.01 Test Range: 5 HV~3000 HV XY Test Table Dimensions: 100 x 100 mm XY Test Table Travel: 25 x 25 mm Max. Sample Height: 120 mm Max. Sample Width: 110 mm Hardness Conversion: HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output: Built-in printer, RS232 interface Power Supply: 220V, 60/50Hz Dimensions (mm): 441 x 270 x 480 Net Weight (kg): 35 Condition: used Scope of delivery: (see picture) Bdedpfx Aljzgbr Sowjg (Subject to changes and errors in technical data, all specifications without obligation) Further questions? We would be happy to answer them for you by phone.

Būklė: geras (naudotas), Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Unit: “Touchpanel” All control and operation commands can be executed simply by touching the function icons on the touch panel. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These feedthroughs allow measurement lines and test devices to be routed into the test chamber space. Feedthroughs: 1 feedthrough ∅ 125 mm installed on the right 1 feedthrough ∅ 50 mm installed on the left Volume: 990 liters Test Chamber Interior Dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature testing: Minimum temperature: –70 °C Maximum temperature: +180 °C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K Temperature change rate (heating): 4 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 2750 W Data for climate testing: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operation data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Rated power: 19.8 kW Refrigerants: R-452A / R23 Weight: approx. 910 kg Important information for your safety as a buyer! Bodpezgbtpjfx Alwodg The following checks and preparations are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, replenishment with legally compliant refrigerants 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the listed data!) If you have any further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), RS Simulators Type: ST2K320/45 Water-cooled shock test system Operating climate range Bdjdpfxszgbumj Alwog Temperatures in upper test chamber: Temperature range: +40 °C to +180 °C Temperatures in lower test chamber: Temperature range: -40 °C to +100 °C Ambient temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber weight: approx. 850 kg Important safety information for you as a buyer! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors. Specifications may vary!) If you have any further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), RS. Simulators Model: ST2K320/45 K Shock Test System, Water-Cooled Temperatures in the Upper Test Chamber Temperature Range: +40 °C to +180 °C Temporal Deviation: ±0.8 K according to DIN 50011 with an empty test chamber Temperatures in the Lower Test Chamber Temperature Range: -40 °C to +100 °C Temporal Deviation: ±0.8 K according to DIN 50011 with an empty test chamber Humidity Levels in the Upper Test Chamber Climatic Temperature Range: +40 °C to +90 °C Humidity Range: 20% to 98% (±2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating Climate Range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test Chamber Dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Bdsdpfxszgbute Alwsg Electrical Power Supply: Total Power: 13 kVA Current Consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber Weight: approx. 950 kg Important Safety Information for Buyers: The following checks and services are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data may be subject to change and errors!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent major achievements in the application of digital and optical technologies in user-friendly laboratory weathering test devices. The 3000 Series is approved by numerous OEMs in the textile, paint and coatings, as well as plastics industries as an exclusive platform for precise, reproducible, and repeatable results in lifetime prediction. Features: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverage Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000’s humidification system operates with a compressed air ultrasonic spray nozzle. Prior to entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 features a secondary water-oil filter and a 5-micron particulate filter. Ensure a separate oil-water separator is installed and do not rely solely on the air regulator filter, as it is designed only as a supplementary device. Compressed air specifications: Pressure: 80–100 PSI (552–689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000: 37.5" width x 29" depth x 72" height (95 cm width x 73 cm depth x 183 cm height) Bjdpfxezg Tmhj Alwedg Required footprint: 41.5" width x 80" depth (105 cm width x 203 cm depth) Total weight: 404 kg Voltage: 380-220 V, 38 A, 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of supply: (See photo) (Specifications may change; errors excepted!) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Binder incubator. Key Features Model BD 115 | Standard incubator with natural convection Technical Data BD 115 External Dimensions: Net width: 835 mm Overall height (incl. feet/casters): 705 mm Net depth: 645 mm Overall depth (incl. door handle and exhaust tube): 750 mm Minimum rear wall clearance: 100 mm Minimum lateral wall clearance: 160 mm Exhaust tube, external diameter: 52 mm Doors: Number of doors: 1 Internal Dimensions: Width: 600 mm Height: 480 mm Depth: 400 mm Bdedpfszgaicex Alwsg Internal volume: 115 liters Steam chamber volume: 142 liters Shelves: Number of shelves included: 0 Maximum number of shelves: 5 Maximum load per shelf: 20 kg Permissible total load: 50 kg Weight: Empty weight: 61 kg Temperature Data: Temperature range: 5°C above ambient to 100°C Temporal temperature fluctuation: at 37°C: ± 0.1 K at 50°C: ± 0.1 K Spatial temperature deviation: at 37°C: ± 0.4 K at 50°C: ± 0.8 K Heating-up time: to 37°C: 70 minutes to 50°C: 90 minutes Recovery time after door opened for 30 s: at 37°C: 10 minutes at 50°C: 12 minutes Electrical Data: BD115-230V IP 20 Nominal voltage (+/-10%) at 50 Hz: 230 V Nominal voltage (+/-10%) at 60 Hz: 230 V Current type: 1N~ Nominal power: 0.20 kW Type: BD 115 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For any further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Weiss climate test chamber. Weiss Climate Test Chamber, Water-cooled (Refrigerant converted to R-452A) Temperature testing Bdodjzgavvopfx Alwsg Volume: 335 liters Test chamber dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: –42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation, temporal: ± 0.1 to ± 0.5 K Temperature uniformity, spatial: ± 0.5 to ± 1.5 K Climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, temporal: ± 0.1 to ± 0.3 K Temperature uniformity, spatial: ± 0.5 to ± 1 K Humidity deviation, temporal: ± 1 to ± 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight: approx. 515 kg Important safety notice for buyers! The following services are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change or error!) If you have any further questions, we are happy to assist you by phone.