Sąlyga: labai geros būklės (naudotas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Cooling Unit: Dljdpfsup T Uqox Admea Air-cooled, low-noise, fully hermetic with stepless capacity adjustment via electronic monitoring and control system. Uses environmentally friendly refrigerant R404A. Door: Fully opening door, left-hand hinge, one-handed operation, lockable. Rack: Stainless steel, support surface 970 x 980 + 500 mm. Maximum load per rack: 35 kg. Maximum total load with full racking: 100 kg. Test Chamber Illumination: 3x halogen lamps, 20 W, 12 V. Control: 32-bit controller. LCD control panel. Digital display of set and actual values. Numeric input of set values. Plain text error messages. RS 232 interface. Free switching channels for customer-side specimen control. Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Pipe lead-through NW 50 Control Panel Window: 570 x 710 mm Electrical connection, cable length: 5m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 1.5 K/min Heat Emission: Approx. 2500 W at +20°C Approx. 2100 W at 0°C Approx. 1500 W at -20°C Technical data refer to ambient temperature of +25°C, rated voltage 400 V, without test specimen, without heat radiation, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions (internal): Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operational Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain: non-pressurized, R 1/2" internal thread Sound pressure level (measured per DIN EN ISO 3744, 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important information for your safety as the buyer! The following points are carried out on all chambers we offer, prior to sale: 1. Functional check and replacement of necessary components 2. If required, new fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and information!) We are happy to answer further questions by phone.

Sąlyga: geras (naudotas), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Dodsuvipwjpfx Admola Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 13 m³ External dimensions (WxDxH): approx. 2260 mm x 3850 mm x 2780 mm Test chamber (WxDxH): approx. 2254 mm x 2645 mm x 2251 mm Door opening (WxH): approx. 2251 mm x 2254 mm Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Sąlyga: geras (naudotas), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical Data of the Climate Chamber: Temperature range: -40...+120°C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 50m³ External dimensions (W x D x H): approx. 4800mm x 6100mm x 2640mm Test chamber (W x D x H): approx. 4500mm x 5000mm x 2200mm Door opening (W x H): approx. 3000mm x 2200mm Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and information!) We are happy to answer further questions by phone. Dledpfx Adjuvi R Aemsa

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Heat Compensation at +20°C: 3000 W Heat Compensation at -20°C: 3000 W Test Chamber Internal Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test Chamber Volume: 335 liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50 Hz Rated Power: 10 kW • Rated Current: 21 A Dsdpju H U Twofx Admola Sound Level at 1 m Distance (Free Field Measurement):

Sąlyga: labai geros būklės (naudotas), Climats Type: EXCAL 1413-HA Climate Chamber, Air-Cooled The EXCAL is equipped with a 15-inch capacitive multitouch panel PC, SSD storage, Windows 7, and 2 USB ports. This ensures it features the latest state-of-the-art technology. Technical Specifications: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Viewing window: 350 x 380 mm Volume: 138 liters Standard cable ports installed: R1: 80 mm Ø L1: 80 mm Ø Data for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.8 K Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Data for climate testing: Temperature range: +10 to +90 °C Humidity range: 10 to 98 % RH Dsdpfx Adjv Dt T Tjmela Operating data: 3/N/Ph+PE 400V ±10% 50 Hz Rated power: 9.8 kVA Refrigerant: R-404A / R-23 Weight: 430 kg Important safety information for buyers: The following steps are performed in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data and specifications subject to change and error!) For any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Model: HA 2472 BS Cleanroom Workbench For installation and operation in laboratories Internal dimensions: 1,800 mm x 580 mm x 830 mm (Length x Depth x Height) Lighting, gas connection Condition: used Scope of delivery: (see pictures) (Subject to technical changes and errors! Specifications are subject to change.) Dsdpfxjvyd Ado Admola For any further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Type: HT 7010 Heraeus Vötsch Temperature Test Chamber, Water-cooled Temporal temperature deviation: ± 1 K Spatial temperature deviation: ± 2 K Housing dimensions: Width 820 mm, Depth 840 mm, Height 1670 mm Internal chamber: Width 550 mm, Depth 350 mm, Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range: -70°C to +180°C 2 x side ports, 9 cm diameter Weight: approx. 260 kg Refrigerants: R404A and R23 Important Safety Information for Buyers: The following procedures are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant Djdpohhyz Ssfx Admela 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), RMS Vibrations Test System Here we offer you an RMS Electrodynamic Vibration Test System. Technical Specifications: Sine: 7.5 kN Random: 6.7 kN Shock: 13 kN Displacement pk-pk: 26 mm Velocity: Sine 1.5 m/s Random 2.5 m/s Shock 2.5 m/s Acceleration: 100g Cooling: air-cooled Type: SW 3509 + Amplifier TGD 6000-000.00 and Fan Total weight approx. 4000 kg Dsdpfx Adehylymomsla Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we are happy to answer them by phone. Orders in writing possible by email or fax.

Sąlyga: labai geros būklės (naudotas), MMM Incubator Climacell Offered here is an MMM Incubator Climacell. MMM Incubator Climacell Incubator Volume: 707 liters Operating temperature: from 0.0°C to 99.9°C (no humidity) Internal dimensions: Depth: 50 cm, Width: 94 cm, Height: 140 cm Dlodpfed Hyh Tjx Admsa From 10°C to 90.0°C (with humidity) Relative humidity: 10–95% Temperature range: up to 99°C Connection: 230V 50/60Hz Power consumption: 3440W Type: Climacell 707 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), RS simulators We are offering a test chamber here. Water-cooled Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800mm (W x H x D) External dimensions: 1100mm x 1850mm x 1500mm (W x H x D) Current consumption: 13.5 A Refrigerant: R404A Supply voltage: 3x400V/N/PE 9A Weight: approx. 750kg Model: TS 600/45 Explosion-proof operation not tested However, max. 160°C in this condition Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) If you have further questions, we would be happy to answer them by phone. Dledpfxjg Urq Io Admja

Sąlyga: geras (naudotas), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber internal dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Fields of application: Corrosion testing: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature constancy: Temporal temperature deviation: ±K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Dljdpfsudvg Rjx Admea Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in technical data. All details without guarantee!) For further questions, please do not hesitate to contact us by phone.

Sąlyga: geras (naudotas), Espec Model: EGNX12-6CWL Espec Temperature and Climate Test Chamber, Air-Cooled Temperature (and Humidity) Test Chamber N Series Power Supply: AC 400/460 V, 3-phase, 50/60Hz, 32A Temperature range: -70 to +180°C Humidity range: 10 to 95% RH Temperature change rate: Heating: 15 °K/min Cooling: 11 °K/min Internal dimensions (W x H x D in mm): 600 x 750 x 850 External dimensions (W x H x D in mm): 889 x 2098 x 1768 Usable volume: 380 l Refrigerant: R404A Weight: 370 kg Important information for you as the buyer for your safety! The following work is carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data, information provided may be subject to confirmation!) Dlsdpfx Aot Nf Upodmoa If you have further questions, we are happy to answer them by phone.

Sąlyga: naudotas, LDS Type: V875 Shaker System V875-440 with SPA40K Amplifier Djdpfxsuxcpwo Admela Vibration Exciter for Medium Forces Technical Data: Head Expander: 850 x 850 mm Armature Size: 440 mm Sine Force Vector: 35.6 kN (peak) Random Force Vector: 35.6 kN (rms) Shock Force Vector: 106.75 kN (peak) Frequency Range: 5 to 3000 Hz Maximum Specimen Mass: 600 kg Maximum Acceleration: 1078.7 m/s² Maximum Velocity: 1.8 m/s Condition: used Weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Scope of delivery: (see pictures) (Subject to changes and errors in the technical data and specifications!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Kübrich Dedpfxsumv Emo Admela Kübrich Test Systems 48V Belt Starter Generator – Component Test Bench Test Bench Details: (See image 13) Frame with: (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for the control system, transfer panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended Use: The test bench is designed for conducting tests on belt starter generators during development. Technical Specifications: Electrical connection data Supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short term, less than 1 s) Control voltage: 24 V Mechanical performance data according to the load machine’s data sheet Note a gear ratio of 1:2 to the DUT shaft. Speeds: Load machine: Setup mode: 0 - 50 rpm Automatic mode: 0 - 10,000 rpm Tested motor: Setup mode: 0 - 100 rpm Automatic mode: 0 - 20,000 rpm Dimensions and Weight Width: 850 mm Height: 1,386 mm Length: 1,687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (See image) (Technical specifications and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Sąlyga: geras (naudotas), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 (-55 to +140°C) Shaker: Vibration Exciter: 4x LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation Modes: Sine / Random / Shock / Real-Time Profiles Force Vector per Shaker: 2.9 kN (Peak Sine) / 1.9 kN (RMS Random) / 4.6 kN (Peak Shock) Maximum Payload: 100 kg per shaker Acceleration: max. 44 g RMS / 66 g Peak Velocity: max. 0.7 m/s Stroke Amplitude: max. 25.4 mm p-p (1 inch) Frequency Range: 5…4000 Hz Fixture Area for Test Specimens: 1000 x 1000 mm aluminum profile frame Special Features: The four shakers can be operated synchronously or asynchronously with the MIMO controller. With the aluminum profile frame, a fixture area of 1x1 m² is achieved for large test specimens. Without the profile frame, mobile use as a modal shaker for large items such as complete vehicles is possible. The lightweight vibration components of the shakers enable excitation frequencies up to 4000 Hz. Weight: 2000 kg Climatic Chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / Monoblock, welded Dimensions (mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8 m³) External without base frame: 2,340 3,600 2,800 External with base frame: 2,340 3,600 3,800 Aggregat external: 1,200 2,400 2,200 Door: 2,000 2,000 2 pcs test chamber windows in door: 460 x 460 Weight: 4,500 kg Insulation: 140 mm PU, CFC-free, B1 to DIN 4102 Outer cladding: 0.6 mm steel sheet, painted to RAK 7035 Temperature range: -55 °C to +140 °C Temperature constancy: ± 0.5 K over time Climatic range: +10 °C to +95 °C Dledpfjur Hrbox Admoa Humidity range: 10% to 95% RH Refrigerant R404A 29 kg Total weight: 6,500 kg Condition: used Scope of delivery: (see photo) Sample images! Current images to follow! (Changes and errors in technical data and specifications excepted!) For further questions, we will be happy to assist you by phone.

Sąlyga: geras (naudotas), Atlas Type: Xenotest Alpha LM High Energy Weathering Test Device Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOCHROME Filter XENOSENSIV Gear Unit Lamp output control in W/m² Sample chamber temperature regulated up to 70°C Measurement sensors at sample level: XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Spray function Water supply with integrated water tank Electrical configuration: 230V, 50/60Hz Absorption Filter 7 IR: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Window Glass 10 FG: Steady-state 40 - 110 W/m² / Cyclic 21 - 57 W/m² Absorption Filter 4 IR + 3 Window Glass: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Absorption Filter 6 IR + 1 UV: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Relative electrical performance without XENOSENSIV sensor: continuously regulated to the set value: 53 - 120 % Sample chamber temperature: 20 - 70°C (depending on selected filter configuration) Black standard temperature: Steady-state 25 - 130°C / Cyclic 25 - 100°C Relative humidity: 10% - 95% Fan speed: 500 - 2500 rpm Djdpfxeuuaryj Admsla Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and possible errors!) Further questions can be answered by phone.

Sąlyga: geras (naudotas), Heraeus Vötsch Dledpfxoun Izcj Admsa Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side cable entry: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Sąlyga: geras (naudotas), TIRA Model: Walk-in Climate Simulation Chamber TTZ 4008 S(m) Technical Data: Temperature range: -40...+120 °C Dlsdouvil Sepfx Admsa Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410mm x 3920mm x 2530mm Test chamber (W x D x H): approx. 2002mm x 2148mm x 2005mm Door opening (W x H): approx. 2002mm x 2005mm Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Sąlyga: geras (naudotas), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% rH Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone. Dsdpfouviydsx Admola

Sąlyga: geras (naudotas), RS Simulators Type: Walk-in Climatic Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95 % rH Humidity tolerance: +/- 5.0 % rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical Data – Solar Simulation: Control module: Mitronic STB1-8 Number of luminaires: 8 Ballast: Mitronic CP2k5 – 2ZS Dljdpjuvi Nfsfx Admsa Ignition device: Hönle Lamps: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information subject to change!) If you have any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Model: WK-340/70 air-cooled Test chamber volume approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1805 mm, Width 780 mm, Depth 1700 mm Specifications for temperature testing: Temperature range: -70 to +180 °C Temporal temperature fluctuation: ± 0.1 to ± 0.5 K Spatial temperature fluctuation: ± 0.5 to ± 2.0 K Temperature change rate (heating): 3 K/min Temperature change rate (cooling): 2 K/min Specifications for climate testing: Dljdev Uap Nepfx Admoa Temperature range: +10 to +95 °C Humidity range: 10 to 98 % RH Temporal temperature fluctuation: ± 0.1 to ± 0.3 K Spatial: ±0.5 to ±1 K Humidity fluctuation (center of usable space): ± 1 to ± 3 % RH Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Connected load: approx. 4.1 kW Rated current: 14.0 A Sound pressure level: approx. 60 dB(A) Weight: approx. 500 kg Refrigerants: R404A / R23 For your safety as a buyer, the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run supervised with calibrated devices. Condition: used Scope of supply: (See picture) (Subject to change and errors in technical data and specifications!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VCS³ 7027-10 Vötsch Temperature and Climate Test Chamber, Water-Cooled With temperature change rate of 10 K/min Data for Temperature Testing: Dlodpev R Ty Tjfx Admja Temperature range: -72°C to +180°C Temporal temperature deviation at test space center: ±0.3 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: - Heating: 10 K/min - Cooling: 14.5 K/min Data for Climate Testing: Temperature range: +10°C to +95°C (Extended climate range: 2°C/95% relative humidity controlled for max 2 hours) Temporal temperature deviation at test space center: ±0.2 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation at test space center: ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climate range: 2°C/95% r.h. controlled for max 2 hours) External dimensions: Width 780 x Depth 1895 x Height 1775 mm Test space dimensions: Width 580 x Depth 615 x Height 750 mm Test space volume: approx. 270 liters Side ports: 50 mm and 125 mm Operational Data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp: 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Main fuse (on-site): 63 A slow-blow Refrigerants: R404A / R-23 Weight: approx. 835 kg For your safety as buyer, please note: The following steps are performed on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) Further questions can be answered by telephone.

Sąlyga: geras (naudotas), Zwick Tipas: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Medžiagų bandymo mašina Bandymo jėga tempime / gniuždyme: 500 N Bendras aukštis be galvos traverso: 789 mm Bendras plotis: 411 mm Bendras gylis: 622 mm Statymo plotas: naudingas pagrindo plotas: 0,008 m² apkrovos rėmo pagrindo plotas: 0,196 m² Specifinis grindų apkrovimas: atsižvelgiant į tipinę įrangą: 0,85 kg/cm² su 50% saugos koeficientu: 1,28 kg/cm² Lubų apkrova: atsižvelgiant į tipinę įrangą: 97 kN/cm² Dsdpfx Ajw Ib Uwjdmjla su 50% saugos koeficientu: 146 kN/cm² Darbo zonos gylis: 105 mm Darbo zonos aukštis su priekinio kampo montavimu į viršų: min. aukštis: 235 mm maks. aukštis: 565 mm Darbo zonos aukštis su priekinio kampo montavimu žemyn: min. aukštis: 90 mm maks. aukštis: 420 mm Svoris: apie 78 kg su papildoma komplektacija Būklė: naudotas Komplektacija: (žiūrėkite nuotrauką) (Tecninių duomenų pokyčiai ir klaidos galimi!) Dėl papildomos informacijos maloniai kviečiame susisiekti telefonu.

Sąlyga: labai geros būklės (naudotas), Here we offer a temperature test chamber. Dlodpfoqxavaex Admsa Feutron Temperature Test Chamber, air-cooled Nominal test chamber volume: 280 liters Dimensions: External chamber dimensions: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Internal test space: Width 720 mm x Height 690 mm x Depth 560 mm Door clear opening: Width 720 mm x Height 690 mm Heated viewing window: Width 500 mm x Height 600 mm Installation footprint of the temperature test chamber with doors open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthrough ports, 2 units on left side panel, Ø 100 mm Temperature range: -70°C to +180°C Heating rate: 3.0 K /min Cooling rate: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerants: R507 / R23 Buyer information for your safety: The following measures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Modifications and errors in technical data reserved!) For any further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), We are offering a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32 Controller, Water-Cooled Control Unit: "Touchpanel" All control and operation commands can be triggered simply by touching the function symbols on the "Touchpanel" control unit. Adjustable Feet To compensate for floor unevenness and ensure sufficient ventilation of the machine components, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring lines and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: Nominal width 125 mm L1: Nominal width 50 mm (Refrigerant converted to R-452A) Test Chamber Volume: approx. 600 liters External Dimensions (with hinges and door lock): Height 1995 mm, Width 1090 mm, Depth 1660 mm External Dimensions (without hinges and door lock): Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max.: 2500 W Operating Data: Internal lighting: Halogen bulbs 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (on-site): 16 A slow-blow Sound pressure level: approx. 58 dB(A) (measured 1m in front, 1m height) Dedpfx Asrak Rmedmsla Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and details subject to change and errors excepted!) Feel free to contact us by phone for any further questions.