RST plėtiniai

Zeiss

Būklė: labai geros būklės (naudotas), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Description: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measurement system O-INSPECT from ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for the simultaneous display of actual state, nominal profile, and deviations, making it very easy to identify and interpret measurement results. General Data: Dimensions: Width 1055 mm x Length 1351 mm x Height 1770 mm Measuring Range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM: 800 kg Workpiece, max.: 20 kg Noise Level of CMM: < 70 dBA Electrical Data: Mains Voltage: 100, 110, 120, 125, 230, 240 V~ (± 10%) Power Type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5%) Power Consumption: max. 1500 VA Fuses: - At 230 V or 240 V: C 16 A - At 100 V or 125 V: 15 A Travel Speeds: Creep Mode (SLOW): 0 to 5 mm/s Setup Operation: 0 to 70 mm/s Serial Measurement Operation - Axis (X, Y): max. 200 mm/s - Axis (Z): max. 50 mm/s - Axis (3D): max. 287 mm/s Environmental Conditions: The following conditions must be met for proper operation of the coordinate measuring machine: - Ambient temperature for operational readiness: +17˚C to +35˚C - Relative Humidity: 40% to 70% (non-condensing) - Room temperature during measuring operation: 20˚C ±1 K - Altitude above sea level: - 100-125 V: max. 3000 m - 230-240 V: max. 2000 m Probe System: Probe System: CFS Probe Type Data: - Probe Type: CFS 2mm - Measuring Range: 2 mm; Working Distance: 61 mm; Spot Diameter: 12.5 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 15° - Measuring Range: 3 mm; Working Distance: 22.5 mm; Spot Diameter: 12 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 30° - Measuring Range: 10 mm; Working Distance: 70 mm; Spot Diameter: 24 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 20° *Values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and Resolution: - Mass of Rotary Table: 7 kg - Resolution: 0.15’’ Dynamics: - Angular velocity: max. 50˚/s - Rotational speed: 8.3 min⁻¹ Scope of Delivery: Bsdpfx Aozii Dhskujli The standard version of the O-INSPECT coordinate measuring machine includes the following components: - Coordinate Measuring Machine (CMM) - Control Unit (integrated) - Control Panel - Computer with peripherals - Software: CALYPSO 5.2 - Documentation - Probe System - Reference Probe - Calibration Standard - Calibration Template Scope of delivery: (Zeiss Coordinate Measuring Machine as shown) Condition: used (Technical data subject to change and errors excepted!) Please enquire about transport options before purchase. For further questions, we are happy to assist you by phone.

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 Bedpfx Akjl Tn Afsujli 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Price / details on request. All technical details are subject to errors or omissions. We sell exclusively to countries within the European Community.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 201502530269, matavimo diapazonas X ašis: 700 mm, matavimo diapazonas Y ašis: 700 mm, matavimo diapazonas Z ašis: 600 mm, stalo apkrova: 560 kg, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of manufacture: 2015 | Commissioned: 2016 | Perfect condition | Very low operating hours For sale: CMM (Coordinate Measuring Machine) ZEISS Contura G2 with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe. The device comes from a controlled laboratory environment and has only been used "on-demand" during a single shift, never on a production line – resulting in very low actual mileage and excellent technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring range (X/Y/Z): 700 / 700 / 600 mm Year of manufacture: 2015 Year of commissioning: 2016 Technical & visual condition: perfect Measurement error MPE (E0): 1.7+L / 350 μm 🔹 Configuration & Equipment ✅ ZEISS VAST XXT TL1 active scanning probe ✅ Probe rack / changer ✅ Probe styli set (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Calibration sphere ✅ BP26_SE control console 🔹 Usage History Device operated exclusively in laboratory mode Sporadic, project-based use ("on-demand") Single shift, no serial or production work This results in very low mechanical wear 🔹 Service & Calibration Bsdpfxjyzmbds Akusli ✅ Service and calibration performed exclusively by official ZEISS service ✅ Regular maintenance as per manufacturer’s recommendations ✅ No third-party intervention ✅ Device fully functional 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Complete documentation ✅ Transport on buyer’s side

Būklė: geras (naudotas), Zeiss Primovert invertuotas mikroskopas (SN: 3841010097) WF 10x/20 okuliarai Bsdpjzhidrjfx Akusli Zeiss Primo Plan-Achromat 4x/0,10 Zeiss Primo Plan-Achromat 10x/0,25 Ph1 Zeiss Primo Plan-Achromat 20x/0,30 Ph1 Zeiss Primo Plan-Achromat 40x/0,50 Ph1 Ph1 / 0,3 fazių slankiklis Apsauginis dulkių gaubtas

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 120 mm, W ašies eiga: 450 mm, For sale: Hauser coordinate grinding machine, model S35-400 The machine is in excellent condition and underwent partial refurbishment in 2024 at a cost of €15,000. The machine features six high-quality grinding spindles, a face motor, and turbines. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Maximum taper grinding: 16° Table size: 600 x 380 mm T-slots: 6 slots, 10 mm width, 50 mm spacing Table load capacity: 300 kg Speed and Tooling Speed 22S: 4,500 – 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 – 45,000 rpm 80S: F6 Speed 80S: 40,000 – 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Groove grinding attachment: 2,900 – 34,500 rpm Planetary motion: 5 – 250 rpm C-axis: 0 – 5 rpm Feed X/Y: 0 – 1,200 mm/min Feed W-axis: 900 mm/min Feed Z-axis: 0.5 – 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ System pressure: 5 bar Floor space required: 3.5 x 4.4 m Machine height: 3.5 m Connected load: 8.3 kVA Weight: 3.1 t EQUIPMENT - Groove grinding attachment - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction unit - High-quality accessories included Transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Viewings by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Bedpfswtqthsx Akujli Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Būklė: naudotas, Originalūs ZEISS CMM zondų laikikliai ir ilgintuvai Originalūs ZEISS zondų laikikliai Zondo ilgintuvai Įvairūs žvaigždės formos ir tiesūs zondai Blsdpfszg Eczjx Akusi Kaip parodyta nuotraukose Būklė: Naudota Gera darbo būklė Atsargiai išimta iš veikiančio ZEISS CMM Puikiai tinka ZEISS CMM naudotojams, ieškantiems originalių atsarginių dalių ar papildomos matavimo įrangos.

Būklė: labai geros būklės (naudotas), ZEISS Type: DSM 962 Bedpfx Ajzdthyjkueli The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external saving of data and images. This enables quick and easy acquisition of information about the composition and morphology of specimen surfaces down to the sub-micrometer scale. With a magnification range from 5x to 300,000x, both macrostructure and microstructure investigations are possible. The application range can be significantly expanded by using special add-ons, allowing for analytical examinations of microareas on the surface, for example. Operation of the device can be conducted either via conventional control elements or via keyboard and mouse (optional). Electron optics and vacuum control are operated conventionally. Image memory functions are operated using the keyboard or mouse (optional). Centrally located on the control panel is a separate info screen for menu display. This user manual serves as a guide to help users achieve the best possible results with the device. The explanations have been kept as simple as possible to provide even less-experienced users with the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Steps in a 1-2-3-5-10 sequence Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm – guaranteed with tungsten cathode at 30 kV, 6 mm working distance, un-tilted specimen 25 nm – guaranteed with tungsten cathode at 1 kV, 6 mm working distance, un-tilted specimen 3.5 nm – guaranteed with optimum LaB6 cathode at 30 kV, 6 mm working distance, un-tilted specimen Scope of delivery: (DSM 962 with accessories as pictured) Condition: used (Specifications and data may be subject to change and errors reserved!) Please ask about shipping options before purchase. We are also happy to answer further questions by phone.

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: ribota funkcionalumas, Parduodama CNC cilindrinio šlifavimo staklės – STUDER S40 (1999 m.) Siūlome įsigyti STUDER S40 cilindrinio šlifavimo staklės, pagamintas 1999 metais. Staklės yra darbinės būklės. Įrengtos viena šlifavimo ašimi ir revolverine galvute, tinkama tiek išoriniam, tiek vidiniam šlifavimui – tai universalus sprendimas preciziškam apdirbimui. Valdymo sistema: FANUC 16 Pagrindinės savybės: • Išorinio ir vidinio šlifavimo galimybė • Revolverinė galvutė • Patikima FANUC 16 valdymo sistema • Tvirta ir patikrinta STUDER konstrukcijos kokybė • Operatorius vadovas Pristatymo sąlygos: EXW (Ex Works) Staklės apžiūrėti galima iš anksto pagal susitarimą. Bedpfxjy Elz Ds Akuoli Dėl daugiau informacijos, nuotraukų ar kainos kreipkitės nurodytais kontaktais.

Gamybos metai: 1990, būklė: naudotas, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement kW Machine weight approx. t Space requirement approx. m Overhauled: 2000 X-axis as longitudinal, traversing gantry 850 mm Y-axis cross slide in gantry 1,200 mm Z-axis as measuring head quill (vertical) approx. 600 mm Passage width between gantry legs approx. 1,000/1,080 mm Passage height approx. 750 mm Table size approx. 1,000 x 2,100 mm Table height above floor approx. 850 mm Machine height approx. 3,050 mm Weight approx. 3,800 kg Special equipment / Accessories: - Granite plate as measuring table and gantry head, vibration-damped - 3D measuring touch probe head for 5 different styli and for SCANNING mode for continuous data capture, resolution 0.1 µm Bledpfxst Hwqke Akusi - CNC control for simultaneous 3-axis movement - HEWLETT-PACKARD computer system H 382 with color screen, floppy drive, keyboard, possible printer - ZEISS software included: UMESS 300/MFT 300 with extension package (status 1998), plus 302 form & positional tolerance measurement, 303 fitting functions, 305 automatic operation, 307 Parameter Ctrl. Manager, plus option Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / borehole pattern program A 741 and Probe Check 99, - Mobile hand control panel with progressive joystick for continuously variable travel speed in 3 axes - Probe magazine mounted on the machine, equipped with 3 probes, including probe changer - Separate electrical and control cabinet type 608485, separate computer desk, separate cabinet - Operating manuals, various measuring probes, and bolt-on calibration spheres / reference standards for the table

Gamybos metai: 1995, būklė: naudotas, x-travel: 9,200 mm y-travel: 1,600 mm z-travel: 2,400 mm Test piece diameter: mm Working area: mm Distance between centers: mm Control system: ZEISS C 99 Total power requirement: kW Machine weight: approx. 30 t Space requirement: approx. 10 x 3.6 m Z E I S S - S T I E F E L M A Y E R Double-sided CNC traversing 3D Measuring Machine Model: SMM Duplex / Eagle Eye Year of manufacture: 1995, subsequently modernized several times Measuring stand working range: X-axis (horizontal): approx. 9,200 mm Y-axis (transverse): approx. 1,600 mm / 3,200 mm Z-axis (vertical): approx. 2,400 mm Measuring plate size (4-piece segmented): 10,000 x 3,500 mm External dimensions of measuring plate including guide rails: 10,000 x 3,650 mm Plate thickness: approx. 450 mm Height of plate above floor: 650 mm Max. traverse speed: approx. 150 mm/sec Total weight: approx. 30,000 kg Special equipment / Accessories: • Two measuring columns, mounted left and right, System C / SMM, side-shiftable along the measuring table with column cross-section for vertical adjustment 160 x 160 mm and cantilever arm cross-section for lateral adjustment approx. 80 mm x 80 mm. Blsdpfxot Hwwke Akuoi • Machine/CNC control unit type ZEISS C 99 - one unit per measuring column • Mounted probe head type RST-P with DSE rotary and swivel joint and CAA correction as well as a reference probe, collision protection • EAGLE EYE Navigator for optical measurement, especially on vehicle bodies and other pressed parts - enables significant time savings, retrofitted in 2007 • Probe changer position for 8 probes, mounted at the front of the plate • Measuring plate made of special cast iron, divided into 4 sections = 4 x 5,000 x 1,750 mm, equipped with height-adjustable leveling feet approx. 250 mm high, sufficient number included • T-slots lengthwise Y+/- 500 mm and various precision mounting holes with threads at specific intervals: Y = +/- 300 / 700 / 1000 mm • Note: Machine is supplied without corresponding SOFTWARE (remains at factory) and without operator panels and without calibration standards (spheres) Condition: good to very good – ideal for measurement of large automotive body parts Delivery: ex stock - as inspected (without software and operator panels) Payment: strictly net - upon receipt of invoice We look forward to your order.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1998, veikimo valandos: 44 675 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 650 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 140 mm, veleno greitis (maks.): 60 000 aps./min, veleno greitis (min.): 9 000 aps./min, ruošinio svoris (maks.): 800 kg, stalo plotis: 860 mm, stalo apkrova: 1 500 kg, W ašies eiga: 635 mm, Įranga: dokumentacija / vadovas, Completamente revisata e in condizioni perfette secondo le specifiche originali e la precisione richiesta. 6 assi X-Y-Z-C-U 7º asse: tavola rotante CNC con contropunta disponibile come opzione Controllo: Fanuc 15 MB Bledpfswb Db Usx Akuei Mandrino di rettifica 60S, velocità da 9.000 a 60.000 giri/min Sistema Hi-Cut con carenatura completa Dresser rotativo CBN per la formatura profili con mandrino Fischer e mola diamantata Dr. Kaiser La macchina è collegata e funzionante, visibile presso la nostra sede di Gals, Svizzera Garanzia di 6 mesi Spedizione, installazione e formazione possono essere fornite

Būklė: naudotas, Gamybos metai: 2005, Didelė ZEISS PRO T SELECT koordinatinė matavimo mašina (CMM) - nedelsiant parduodama. Mašina anksčiau buvo įrengta profesionalioje metrologijos laboratorijoje ir demontuota laikantis visų profesionalių reikalavimų. Ji laikoma viduje ir yra paruošta transportavimui. Techninė specifikacija: * Gamintojas: ZEISS * Modelis: PRO T SELECT Bljdpfszga D Hox Akuei * Pagaminimo metai: 2005 * Serijos numeris: 131860 * Plieninis matavimo stalas: 4000 × 3000 mm * Zondų sistema: Renishaw RDS-CAA su indeksuojama galvute * Kalibracija pagal DIN EN ISO 10360 * Paskutinė ZEISS kalibracija atlikta 2025 m. (dokumentacija yra) * Pilna mašina * Laikymas viduje * Paruošta iškart pakrovimui ir siuntimui visame pasaulyje Komplektacija: * Visa ZEISS PRO T matavimo mašina * Renishaw RDS-CAA zondo galvutė * ZEISS kalibracijos dokumentacija (2025) * Turima techninė dokumentacija (pagal užklausą) Papildoma informacija: Mašiną galima apžiūrėti iš anksto susitarus.

Būklė: naudotas, Dial gauge (lever-type test indicator) Bsdpfx Aeda Abaekujli Passameter Manufacturer: Zeiss Jena Measuring range: 0-25 mm In wooden case

Būklė: naudotas, TECHNICAL DATA - Spindle speed: 5 - 300 [rpm] - Minimum C-axis resolution: 0.001 [degrees] - Vertical travel of main spindle: 130 [mm] - Vertical travel of main spindle (manual operation): 140 [mm] - Grinding spindle speed with motor: 4,500 - 80,000 [rpm] - Grinding spindle speed with turbine: 100,000 - 160,000 [rpm] - Cylindrical grinding without / with intermediate plate max.: 230 / 360 [mm] - Max. grinding length Z (with bar): 125 [mm] - Maximum taper angle for taper grinding: 16 [degrees] - Max. grinding depth for taper grinding with angle: 44 [mm] LINEAR AXES - Travel range X/Y/Z axes: 700 / 500 / 500 [mm] - Rapid traverse speed (X/Y): 4,000 [mm/min] Bledpsx Av Adofx Akusi - Feed rate (X/Y): 0 - 2,000 [mm/min] TABLE - Table size: 770 x 630 [mm] - Max. table load: 500 [kg] - Distance from table to spindle nose: 0 - 600 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Required floor space: 2,650 x 2,577 [mm] - Machine height: 2,677 [mm] - Machine weight: 5,600 [kg] MACHINE HOURS - Operating hours: 44,995 [h] ACCESSORIES - Control unit: Fanuc - Coolant tank * with high-pressure pump * with paper filter - Oil mist extraction - Fire extinguishing system * * Note: Functionality not guaranteed. To be checked by a qualified company appointed by the buyer.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, 3D Coordinate Measuring Machine / CNC Coordinate Measuring Device Bljdsy Iub Sjpfx Akusi Manufacturer: MAUSER/ZEISS | Model: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally, a temperature-controlled hall is available. The machine has been regularly calibrated by ZEISS. The last calibration took place on 07.08.2025, the next calibration (recommended) is due for 08/2026. TECHNICAL DATA: Measuring ranges (LxWxH): 6,000 x 2,500 x 2,000 mm Axes Travels: - X-axis: 6,000 mm - Y-axis: 2,500 mm - Z-axis: 2,000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5.0 + L/250)µm, V2 = 3.5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5.0 + L/250)µm - Ambient conditions required to maintain specified accuracy: * Temperature range: 21°C +/- 3K * Temperature fluctuation: 0.5K/h, 1.0K/d, 0.5K/m - Ambient conditions for operational readiness: * Temperature range: +15°C to 35°C * Humidity: 30 to 70% General Features, Equipment: - Bridge-type measuring machine with finely machined precision guides and recirculating ball shoes - Second Y-axis with granite rail and air bearings - High-resolution Zeiss scales - Form-fit drives on all 3 axes - Collision protection for the quill and probe head (with VAST probe system) for manual and setup mode - Safety position for crane locking - Scale temperature compensation - Microprocessor control - Calibration part: cube, star stylus - Reference stylus D = 8 mm, length: 115 mm - Calibration standard D = 30 mm - incl. basic software package - Load capacity: limited only by foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation No guarantee of completeness or correctness of technical data and equipment. - Subject to prior sale -