Sąlyga: labai geros būklės (naudotas), CTS Model: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C Nsdpoya Ev Nsfx Af Njwb 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system from CTS GmbH, consisting of a conditioning unit model CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It provides precise temperature and climate simulations over an extremely wide operating range. This professional climate and temperature conditioning system from CTS GmbH comprises: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test spaces or test chambers with precisely controlled temperature and humidity levels. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, and lifetime testing). Technical Data (from nameplate & manual): General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate: Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% rH Dew point range: +5 °C to +74 °C Electrical data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A (slow-blow) Connection type: Hardwired Refrigeration system: Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54; Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Important safety information for buyers! The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. Upon successful completion, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: The climate test chamber enables functional and material property testing of test items under the influence of temperature and humidity. Optimal air circulation with a correspondingly high recirculating air volume ensures effective transfer to the test specimens. The air treatment unit is located at the rear of the inner chamber. The unit’s components are housed in a separate frame behind the chamber for easy access. The control system is installed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, measured at supply air with test load and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % r.h. over time All technical data are based on an ambient temperature of +25 °C, rated voltage 400 V, without test specimens, no radiant heat, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Approx. internal dimensions: Height: 2,300 mm / Width: 1,600 mm / Depth: 1,550 mm External dimensions: - Height: 2,800 mm / Width: 2,250 mm / Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight carrier available – costs and arrangements upon request - Scope of delivery: see picture (Subject to changes and errors in technical data. All information provided without liability!) Nwjdpfxox Eabps Af Neb Feel free to contact us by phone for any further questions.

Sąlyga: labai geros būklės (naudotas), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables testing of a specimen’s function or material properties under the influence of temperature and humidity. Efficient air circulation with a high air recirculation volume ensures optimal transfer to the test material. The air handling compartment is located at the rear of the interior. The system's aggregates are mounted behind the unit in a separate frame for easy access. The control system is housed in a separate control cabinet, with the operating panel built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: Nwsdpfsx Eaxbex Af Neb - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured at supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 - ±3 % r.h. over time All technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Internal Dimensions (test space/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Approximate internal dimensions: Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External Dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling System: water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Viewing available by appointment (46325 Borken) - Shipping via freight forwarding available – costs & arrangements upon request - Scope of delivery: (see picture) (Subject to modifications and errors in the technical data and specifications!) We would be happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Nedpfx Afox D Abps Njwb - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Sąlyga: naudotas, Gamybos metai: 2014, 3D koordinatinis matavimo staklės Įskaitant programinę įrangą / kompiuterį / nešiojamą dėžę Nwjdpfx Afjwku Hyj Nsb - Pagaminimo metai: 2014 - Dokumentacija prieinama: Taip - Yra CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: R04 - Valdymas: Konvencinis Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir atpirkimas galimi bet kada, visiems pramonės srities įrenginiams.

Sąlyga: naudotas, Gamybos metai: 2012, mašinos/transporto priemonės numeris: IntNr231474, KEYENCE_Modellreihe IM-6020_B. J. 2012 Zum Verkauf steht eine optische Messmaschine KEYENCE IM-6020, in gutem, voll funktionsfähigem Zustand. Die IM-Serie ist bekannt für schnelle, hochpräzise, bedienerunabhängige Messungen und eignet sich ideal für den Einsatz in der Qualitätssicherung, der Wareneingangskontrolle und der Fertigungsüberwachung. Technische Daten (Auszug): Modell: IM-6020 Baujahr: 09/2012 Messverfahren: Optisch / berührungslos Messbereich (X/Y): ca. 200 × 200 mm Messbereich (Z): Höhenmessung über Autofokus Messgenauigkeit: bis ca. ±2 µm (abhängig von den Messbedingungen) Wiederholgenauigkeit: sehr hoch, unabhängig vom Bediener Kamera: Hochauflösende CCD-Kamera Beleuchtung: Auflicht / Durchlicht / Konturbeleuchtung Messfunktionen: - Längen-, Winkel-, Radius- und Durchmessermessung Nodpfxoycf Ecs Af Nowb - Kontur- und Formmessung - Vergleichsmessung (OK/NOK) - Automatische Maßerkennung Software: KEYENCE IM-Software zur schnellen Programmerstellung Messzeit: wenige Sekunden pro Bauteil (auch bei mehreren Merkmalen) Zustand: - Gebraucht - Gepflegt - Voll funktionsfähig - Sofort einsatzbereit Abmessungen Maschine: ca. 900 x 500 x 1500 mm Gewicht Maschine: ca. 32 kg Die Maschine kann nach vorheriger Terminvereinbarung unter Strom besichtigt werden. Änderungen und Irrtümer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Sąlyga: labai geros būklės (naudotas), Primus Engineering Type: DST 350 This test equipment is designed for conducting IP protection class tests “Dust” in accordance with standards such as DIN 40050 Part 9 and DIN EN 60529. The test system is intended for testing technical components within specified technical limits under the influence of dust and vacuum. Operation / HMI - Control panel with display and buttons - Manual controls - Stored test procedures - Integrated vacuum circuit with flow measurement Technical data: - Total electrical power: Max. 5 KW - Connection voltage: 400V/50Hz 3-N/PE (16A EEC socket) - Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm - Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm - Volume: approx. 350 l - Mass: approx. 200 kg - Vacuum: 0 to -100 mbar - Suction air flow: 0 to approx. 5 l/min - Operating climate range: Temperature: +12°C to +30°C - Humidity: 25% r.H. to 75% r.H., non-condensing Protection class testing to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Nsdpfx Afert U Nus Newb Dust testing: - Dust-protected: IP5X and IP5KX - Dust-tight: IP6X and IP6KX - with and without vacuum Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors in the provided information!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Netzsch Type: Netzsch TG 209 F3 Tarsus NETZSCH Proteus® software for thermal analysis included. Description: For sale is a NETZSCH TG 209 F3 Tarsus thermogravimetric analyzer made in Germany. The device is used in laboratories, research, development, and quality control for thermogravimetric analysis (TGA). Thermogravimetry measures the change in mass of a sample as a function of temperature and time. This technique is used for examining thermal stability, decomposition processes, moisture and solvent content, as well as filler and ash content. The TG 209 F3 Tarsus is a robust, precise instrument for industrial and research purposes, not a hobby or DIY device. Typical applications: - Plastics and polymer analysis - Chemical and pharmaceutical industries - Materials research - Quality control - Research and development Software / Analysis The scope of delivery includes NETZSCH Proteus® software for thermal analysis. Proteus® software is used for device control, data acquisition, and analysis of thermogravimetric measurements (TGA). It enables, among others: - Control of measurement programs (temperature profiles, heating rates, holding times) - Recording of mass changes as a function of temperature and time - Graphical representation of measurement curves (TG, DTG) - Analysis of decomposition stages, mass losses, and residual masses - Export of measurement data for documentation and further processing Nedpfxoyamzas Af Newb Included in the software delivery (see photos): - Original NETZSCH Proteus® installation media - Printed software and device documentation - USB dongle (hardware license key) from NETZSCH System requirements (according to documentation): - Microsoft Windows 7 / 8.1 / 10 (Professional or Enterprise) Technical data (guideline values): Manufacturer: NETZSCH (Made in Germany) Model: TG 209 F3 Tarsus Measurement principle: Thermogravimetric analysis (TGA) Temperature range: Room temperature up to approx. 1000 °C Heating rate: approx. 0.1 – 50 K/min Max. sample weight: approx. 1 g Balance resolution: up to approx. 0.1 µg Gas operation: Air / inert gas (e.g. nitrogen) Power supply: 230 V AC / 50–60 Hz (switchable to 115 V) Power consumption: approx. 1.0 – 1.2 kW Dimensions (W×D×H): approx. 45 × 55 × 35 cm Weight: approx. 40 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications and data subject to change and errors!) Further questions can be answered by phone.

Sąlyga: naudotas, HEIDENHAIN suktinis enkoderis, inkrementinis kampų matavimo prietaisas Tipas: ROD 285C 18000 03S12-03 ID 358 699-01 Nsdpfx Asx Nqvuef Newb

Sąlyga: paruoštas naudoti (naudotas), Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt are available for standard-compliant safety testing of electrical equipment. 1) Protective conductor resistance (RSL): measuring range: 0Ω–2.100Ω with 1mΩ resolution; measuring range: 2.11Ω–31Ω with 10mΩ resolution; test voltage range (DC): 4.5V–9V; minimum test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ–1.5MΩ with 1kΩ resolution; measuring range: 1.01MΩ–10MΩ with 10kΩ resolution; measuring range: 10.1MΩ–310MΩ with 100kΩ resolution; test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA–21mA with 10µA resolution; measuring range: 20mA–120mA with 100µA resolution. 5) Patient leakage current (medical version): measuring range: 0µA–310µA with 100nA resolution; measuring range: 0.3mA–2.1mA with 1µA resolution; measuring range: 2mA–11mA with 10µA resolution. Includes as-new spare parts, 6x housing covers, hinge rods, and SI+ modules. Documentation available. On-site inspection possible. Nwjdeycigwjpfx Af Njb

Gamybos metai: 2015, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: B115.0548, Caracteristici tehnice: Specificații principale Gama de temperatură: +20 °C până la +300 °C Control temperatură: microprocesor PID cu afișaj SINGLE (ecran color TFT) Senzor: 1 × Pt100 DIN Clasa A în circuit cu 4 fire Precizia setării: Până la 99,9 °C: 0,1 °C De la 100 °C: 0,5 °C Volum: 32 litri Dimensiuni interioare (L × Î × A): 400 × 320 × 250 mm Dimensiuni exterioare (L × Î × A): 585 × 704 × 434 mm Capacitate maximă încărcare: 60 kg (20 kg pe raft) Număr de rafturi: 1 grătar din inox (maxim 3 posibile) Ventilație & Încălzire Tip convecție: Circulație naturală a aerului Sistem de încălzire: Încălzire pe suprafață mare, pe patru laturi Control aer proaspăt: Clapetă de aer reglabilă electronic Racord evacuare: Cu clapetă de reglare Nwjdpfoyana Dox Af Njb Electric & Mediu Alimentare electrică: 230 V, 50/60 Hz, aprox. 1600 W Disponibilă și versiune 115 V Interval temperatură ambient: +5 °C până la +40 °C Toleranță umiditate: max. 80% RH, fără condens Altitudine maximă: până la 2.000 m peste nivelul mării Control & Siguranță Temporizator: 1 minut până la 99 zile Funcție SET POINT WAIT: Cronometrul pornește doar după atingerea temperaturii setate Protecție la supratemperatură: Monitor electronic Limitator mecanic (TB), DIN 12880 Clasa 1 Calibrare: 3 valori de temperatură la alegere Documentație: Software Atmo CONTROL prin USB sau Ethernet Limbi: engleză, germană, spaniolă, franceză Construcție & Materiale Interior: oțel inoxidabil electrolustruit Exterior: oțel inox texturat (spate: oțel zincat) Ușă: complet izolată, cu închidere în două puncte Greutate: Net: ~45 kg Cuptorul este ideal pentru procese de uscare, încălzire, îmbătrânire și întărire în cercetare, controlul calității și laboratoare industriale Stare utilaj: FUNCȚIONAL

Sąlyga: naudotas, Technical Details: Njdpfxeu N Atws Af Njwb Measuring range X-axis: 3000 mm Graduation: 0.1 mm Weight: variable kg No. 1 Vernier Caliper / Slide Caliper made of stainless and hardened steel Brand: INOX Measuring range: 0 - 3000 mm Reading: 0.05 mm via vernier scale Jaw length: approx. 280 mm Without measuring tips for internal measurement No. 2 Vernier Caliper / Slide Caliper made of stainless and hardened steel Brand: Massi according to TGL standard Measuring range: 2000 mm Reading: 0.1 mm via vernier scale

Sąlyga: naudotas, Technical details: Testing height: approx. 600 mm Power supply: 220V / 80VA Machine weight approx.: on request kg Machine dimensions approx. LxWxH: Measuring stand: 0.75 x 0.45 x 1.04 m Dimensions L x W x H: Measuring transducer: 0.32 x 0.51 x 0.23 m Control module TPX Base/granite plate with T-slot: Dimensions = L: 650 x W: 450 x H: 80 mm Travel carriage, Z-axis travel = 600 mm, operated manually via handwheel, tilt function 45° Measuring device, type Perthometer PRK, dimensions L: 330 x W: 150 x H: 105 mm; probe model Perthon RFHTB-250, Y-axis travel = 60 mm automatic/manual, Z-axis travel = 40 mm via knurled knob Nwjdpou N Aw Nefx Af Nob Measuring probe, type Perthometer, digital display with printer Supplied with accessory case containing various measuring tips (photo similar)

Gamybos metai: 1991, Sąlyga: naudotas, Technical details: X-axis: 500 mm Z-axis: 685 mm Diameter: 300 mm Required air pressure: 5 bar Rotary tool table: 360° Tool table: Diameter = 745 mm Tool diameter: approx. 290 mm Total power requirement: 0.5 kW Approx. machine weight: 0.15 t Approx. space requirement: 2.38 x 1.45 x 1.94 m Setting and measuring device - Measuring range Z = 685 mm - Measuring range X = 500 mm - Pneumatic slide clamping - Infinitely fine manual adjustment - Revolving turret table - 220V; 50/60Hz Accessories: - Tool holders: 1x SK40 and 2x SK45 + turning tool holder and adapter Sale as is. IT system not connected – hard drive and software are missing Nwodpfx Asu N An Ief Neb

Gamybos metai: 1982, Sąlyga: naudotas, Technical Details: Z-axis travel: 260 mm Maximum test force: 49 - 7355 N (test load) Test height: 260 mm Maximum specimen weight: 160 kg Throat depth: 200 mm Interface: RS 232 Power supply: 230V / 50Hz Total power requirement: 200 VA Machine weight approx.: 250 kg (without base cabinet) Nwjdpfsu N Avxsx Af Njb Machine dimensions (LxWxH) approx.: 0.7 x 0.6 x 1.8 m (with base cabinet) The hardness testing machine, configured for depth measurement operation, is offered for sale complete with a base cabinet (manufactured by Emco for hardness testing machines). The equipment is suitable for the following testing methods (manufacturer specifications): - Metals: Brinell, Vickers, Rockwell - Plastics: according to DIN 53 456 - Other materials: testing only after consultation with the manufacturer Test loads: electronically controlled via microprocessor, strain gauge and DC motor (M4R-075): 49 to 7355 N Test table: height adjustable via handwheel, table diameter 90 mm Test table receptacle according to DIN 51 225: 25 mm diameter Operation and programming via control panel with graphics-capable, illuminated LC display Accessories: - Additional test tables/plates similar to those shown in the photo - as per photo

Sąlyga: naudotas, Technical details: Machine weight approx.: on request kg Electrical voltage: 50 Hz Current: 230 A Machine dimensions approx. LxWxH: on request m Measuring value acquisition and processing Recording of machine quality measurements "Mode of operation: Measuring the relative movement between tool and workpiece." (Excerpt from operating manual) Measuring computer device options: - Sequential measurement Njdpfou N Avlex Af Nowb - Test plan management - 16 features/parameters - Sequence triggering - Floppy disk drive Control unit by Nieberding, serial no. 8-19863, with connection for air preparation and shut-off valve Equipment: 2 x precision measuring indicators and storage box Accessories: test mandrel Ø 48 mm and testing device

Sąlyga: naudotas, Technical details: Space requirements approx.: 2x boxes: 0.85 x 0.55 x 0.40 m / 0.10 x 0.55 x 0.4 m Aramis 3D camera = robust design for high-end applications with high-resolution 3D sensor. Camera resolution 1936 x 1216 pixels Nodpfxou N Auhe Af Njwb Frame rate (fps): 130 fps at full resolution; 24 fps at half image height; 450 fps at quarter image height. Aramis Adjustable = modular and flexible measuring system for research and industry with user-friendly operation. Without software (only available from manufacturer) Sale/scope of delivery as shown in the photo.

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), Mastersizer Hydro 2000S. The analyzer is serviced annually. Condition: very good. Ready for operation. Technical specifications: Nedpfx Afsx Niiye Nowb Particle size analyzer for liquids: Malvern Mastersizer 2000 with Hydro 2000S module. The Hydro 2000S module can circulate between 50 ml and 150 ml of liquid; variable pump/mixer speeds allow for the suspension and circulation of particles of different sizes and densities, while a variable-power ultrasonic system enables dispersion of particle agglomerates. The Mastersizer 2000 measures particle sizes in the sample and displays their distribution on a graph on the computer. Measurement is performed as particles pass between the detector array and the laser. Hydro 2000S technical data: Voltage: 220-240 V, 50-60 Hz Power: 240 VA Maximum particle size: 600 µm Mastersizer 2000 technical data: Voltage: 240 V, 50-60 Hz Power: 60 VA Particle size range: 0.02 µm to 2000 µm Lasers: Red: Gas laser, wavelength 633 nm Blue: LED, wavelength 466 nm This product consists of two separate units: Mastersizer 2000, Hydro 2000S. Software included. Mastersizer external dimensions (W x D x H): 133 x 30 x 40 cm Hydro 2000S external dimensions (W x D x H): 34 x 35 x 34 cm

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Šiame pasiūlyme įsigysite naudotą optinį koordinatinį matavimo prietaisą „Keyence VL-700“. Pardavimo objektas: 1 x Keyence VL-700 su šia komplektacija: - Įskaitytas nešiojamas kompiuteris su taikomąja programine įranga - Įskaityta kalibravimo plokštė Būklė: Šis pasiūlymas yra naudotas įrenginys, kuris gali turėti naudojimo žymių (nedidelių įbrėžimų ar pageltimų). Prietaisas patikrintas dėl funkcionalumo. Pakuotė ir siuntimas: Maloniai kviečiame įrangą apžiūrėti mūsų darbo valandomis, susitarkite dėl to atskiro susitikimo! Jūrinė pakuotė ir siuntimas į bet kurią pasaulio šalį galimi pagal užklausą! Prieš išsiunčiant ar atsiimant, įrenginio funkcionalumo patikrinimas bus užfiksuotas vaizdo įraše. Dėl detalesnės informacijos kviečiame susisiekti asmeniškai. Nwjdpfxsyamwno Af Nsb

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Parduodame formos nuokrypių matavimo aparatą Jenoptik Formline Roundscan 535. Tinka, pavyzdžiui, velenų matavimui. Mašina labai mažai naudota, būklė kaip nauja. Pagaminimo metai: 2021 Njdpfjx Ndnksx Af Newb Techniniai duomenys

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Parduodame Mahr Precimar ULM 520 S-E ilgmačią. Gamybos metai: 2021. Prietaisas naudotas labai mažai. Būklė kaip naujo. Techniniai duomenys: Išorinio matavimo diapazonas [mm]: 0–520 Vidinio matavimo diapazonas [mm]: 0,5–365 Tiesioginis matavimo diapazonas [mm]: - Išorinis matavimas: 0–520 - Vidinis matavimas: 0,5–365 Ilgio matavimo nuokrypis MPEE1 (L mm) [µm]: - Tik su ABBE matavimo elementu: MPE E1 ≤ (0,09+L/2000) - Su matavimo sistema baziniame lovyje: MPE E1 ≤ (0,6+L/1000) Kartojamumas [µm]: - Su ABBE matavimo elementu: ≤ 0,05 - Su matavimo sistema baziniame lovyje: ≤ 0,2 Matavimo spaudimas [N]: 0,2; 1,0–4,5; 11 Prietaiso ilgis [mm]: 1080 Masė [kg]: 160 Prietaiso matmenys (ilgis x plotis x aukštis) [mm]: 1080 x 380 x 480 Nedpfox Ndndjx Af Nowb

Sąlyga: labai geros būklės (naudotas), Netzsch Model: DSC 200 F3 Maia® Analyzer NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter including accessories Description / Functional scope A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes as it is heated or cooled under controlled conditions. The device can be used to investigate the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpies - Heat capacity - Purity determination of substances Typical applications: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® analyzer - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (operating instructions, instrument manuals, software manuals) - NETZSCH Proteus® software including data carrier and USB dongle Technical data (excerpt): DSC 200 F3 Maia® - Mains connection: 230 V / 50 Hz - Power consumption: approx. 500–800 W - Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) - Measuring principle: Differential Scanning Calorimetry (DSC) Intracooler 40 - Mains connection: 230 V / 50 Hz - Current consumption: 2 A - Refrigerant: R507 - Protection class: IP21 - Max. operating pressure: 24 bar Dimensions & Weight (approx.): DSC 200 F3 Maia®: - Dimensions (W × D × H): approx. 60 × 45 × 25 cm - Weight: approx. 35–40 kg Intracooler 40: - Dimensions (W × D × H): approx. 30 × 40 × 50 cm - Weight: approx. 30 kg Important note: Nwjdpoyaatpofx Af Neb "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photos) (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, veikimo valandos: 640 h, The configuration consists of: - ATOS Compact Scan (measuring head) - Imaging PC7810.S - Industrial stand - GOM Scan software - GOM Inspection software Nwodpfsvpu U Ajx Af Njb Condition: Like new. Hardly used.

Sąlyga: naudotas, Gamybos metai: 1995, 1 vnt. kibirkštinės erozijos staklės, gamintojas Rovella / EDM, modelis VS 400 Zenit, serijos Nr. 151J5VS4Z11203, pagaminimo metai 95, valdymas Zenit, filtravimo sistema Kategorija: Mašinos ir techninė įranga Nedpfxjyaxqys Af Njwb Pardavimas su išlyga: Šio objekto pardavimas vyksta su išlyga ir nepriklausomai nuo minimalios kainos pasiekimo. Sprendimas dėl pardavimo bus priimtas kaip įmanoma greičiau.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, Parduodamas aukščio matuoklis Mitutoyo su granito plokšte. Granito plokštės matmenys X/Y/Z: 1000mm/630mm/100mm, didžiausia apkrova: 300kg, plokštės svoris: apie 190kg, matavimo diapazonas: 630mm, raiška: 0,001mm, min. pakartojamumo tikslumas: 1,8µm. Įrenginio matmenys X/Y/Z: apie 300mm/300mm/1050mm, svoris: apie 30kg. Yra dokumentacija. Galima apžiūra vietoje. Njdeya Hx Eepfx Af Nowb