Konvejeriai pirkti naudotą (1 307)

Sąlyga: naudotas, Gamybos metai: 1999, Transnorm Belt Conveyor 1200-600-500 Nedok Abqxjpfx Abmodc RA1987 The Transnorm belt conveyor was manufactured in 1999 and is in good used condition. It is ideally suited as a feed conveyor and is equipped with a Van der Graaf brand motor. Please note that supports are not included in the delivery scope, but are available as an optional extra. Technical Data: Manufacturer: Transnorm Model: TS 1100 Belt Conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional Conveyor length (FL): 1200 mm Nominal/outer width (NB): 600 mm Belt width (GB): 500 mm Frame height (BH): 80 mm Motor height (MH): 545 mm Motor type: SEW geared motor Motor power: 0.55 kW 230/400 V 50Hz Conveying speed: 1.6 m/s Weight: 60 kg Scope of delivery: without supports (please inquire separately if needed) Optional: Supports We can also extend the conveyor to your required dimensions on request. Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2017, Transnorm Belt Curve Conveyor 45° Left 670-500 IR1100 RA1083 The Transnorm belt curve is from 2017. It is in as-new (used) condition and fully operational. It is equipped with a SEW brand motor. Supports are not included but are available optionally upon request. Belt curves are commonly used in intralogistics for the in-house transportation of unit loads and have become essential in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered drums and a specially developed belt guide system ensure maximum smooth operation. Technical Specifications: Manufacturer: Transnorm Model: TS 1600-105 FH2 Belt Curve 45° Left Year of Manufacture: 2017 Condition: As-new (used) Motor: Fully functional Angle: 45° Conveying Direction: Left Inner Radius (IR): 1100 mm Nominal/Outer Width (NB): 670 mm Usable Width (NUB): 500 mm Side Guide: External sheet steel Drive: SEW geared motor Drive Position: External, pull Weight: 120 kg Included: Without supports (supports available optionally on request) Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Ndedpfx Abjk Aa Dtemec For individual, professional consultation, please contact us. Simply phone or email us. We are happy to assist you with the planning and execution of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Sąlyga: naujas, Gamybos metai: 2020, Transnorm Belt Conveyor Folding Flap Diverter 3000x1120x1000 RA2286 Technical Data: Conveyor length (NL): 3000 mm Belt body width (NB): 1120 mm Belt width (GuB): 1000 mm Installation/transfer height (BH): 1050 mm with 100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Overall dimensions: 3000x1300 mm Tilting height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s / 1.2 s Nedpfjtp Tvwsx Abmjdc Drive: Nord geared motor Electrical Data: Conveyor belt motor: 50Hz V380-500, 1.5 kW / S1 Tilting motor: 50Hz V220/400, 3.0 kW / S1 Return pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of manufacture: 2020 Optionally available: Frequency inverter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and realization of your projects. We look forward to hearing from you. With kind regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and partner for intralogistics.

Sąlyga: naujas, Gamybos metai: 2021, Transnorm Belt Curve Conveyor Right 30°-1270-1100-IR900 – NEW RA2302 Technical Data: Frame width (NB): 1270 mm Frame width with bearing cover: 1390 mm Frame width with bearing and gearbox cover: 1480 mm Belt width (GuB): 1100 mm Overall height (BH): 250 mm Height of bottom-mounted motor: 300 mm Motor height (MH): 550 mm Inner radius (IR): 1200 mm Conveyor angle: 30° degrees Average conveying speed (v m/s): 1.4 m/s Drive: SEW motor with frequency inverter Electrical data: 50Hz V380-500, kW 1.5 / S1 Belt: KT 96 new Ndodpfot D R R Ejx Abmjc Year of manufacture: 2021 Side guide height: 194 mm Optional available: Supports Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For personalised, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, Transnorm nukreipėjas 45° 1500-1250-1000 RA1850 Nodpfeud Dzpox Abmedc Parodinis eksponatas Gamintojas: Transnorm Metai: 2018 Pateikimo kampas: 45° Ilgis viduryje: 1500 mm Diržo plotis (RB): 1000 mm Rėmo aukštis: 270 mm Nominalus/išorinis plotis (NB): 1250 mm Transportavimo greitis: 0,717 m/s V230/400 Galia: 1,5 kW Šoninės sienelės aukštis: 300 mm Komplekte: su varikliu ir šoniniu kreipiančiu (papildomai - pagal užklausimą) Papildomai: Stovai Dažnio keitiklis bepakopiam greičio reguliavimui Kaina nurodyta be PVM, iš centrinio sandėlio Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Individualiai konsultacijai susisiekite su mumis telefonu arba el. paštu. Padėsime suplanuoti ir įgyvendinti Jūsų projektus. Laukiame Jūsų skambučio! Su pagarba, Jūsų Dr. Sonntag GmbH & Co. KG komanda Jūsų intralogistikos specialistas ir kontaktinis asmuo.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor GF 1090-650-500 Ndedpfxek Abaao Abmec RA1425 The Lippert conveyor belt is from the year 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW motor and a MOVIMOT frequency inverter for speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support stands are not included in the scope of delivery but are optionally available upon request. The images shown of the conveyor system were taken while still installed in a logistics centre. Technical Data: Conveying length (NL): 1090 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): infinitely adjustable via frequency inverter Drive: SEW geared motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: type SNB-5E Year of manufacture: 2001 Additionally available: Support legs Side guides (single-sided or double-sided) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For personalised, expert consultation, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor GF 780-650-500 RA1430 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor and MOVIMOT frequency inverter for variable speed control. Side guides and/or photoelectric sensors can be fitted upon request for an additional charge. Support stands are not included in the scope of delivery but are optionally available on request. The pictures shown display the conveyor system still installed at a logistics center. Technical data: Conveyor length (NL): 780 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): infinitely adjustable via frequency inverter Drive: SEW geared motor R17DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: - Movi-Mot frequency inverter - Support stands - Single-side and double-side side guide Net prices, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with your project planning and implementation. Ndjdpfxok Abahs Abmsc We look forward to hearing from you. Best regards, The Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Inclined Conveyor with Curve and Straight Section GF 6150-650-500 RA1440 The Lippert conveyor belt is from 2001 and in good used condition. The belt conveyor is equipped with an SEW motor with a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support stands are not included in the scope of delivery but are available as an optional extra upon request. The shown images of the conveyor system were taken while still installed in a logistics center. Technical Data: Conveyor length (NL): 6150 mm (incline 2310 mm + upper straight section 3840 mm) Frame width (NB): 650 mm Belt width (GuB): 500 mm Overall height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Njdek Abawepfx Abmodc Drive: SEW geared motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of manufacture: 2001 Incline/decline: adjustable Optional accessories: - Support stands - One-sided and double-sided side guide Prices excl. VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please do not hesitate to contact us. Simply contact us by phone or email. We will be happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Inclined Conveyor with Curve and Straight Section GF 6105-650-500 RA1448 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW brand motor featuring a MOVIMOT frequency inverter for speed control. Side guides and/or photoelectric sensors can be installed upon request for an additional charge. Support legs are not included in the scope of delivery but are optionally available on request. The shown images of the conveyor system were taken in its still installed state in a logistics center. Technical data: Njdpfx Abjk Aba Esmjdc - Conveyor length (NL): 6105 mm (inclined section 3180 mm + curve 500 mm + upper straight section 2425 mm) - Frame width (NB): 650 mm - Belt width (GuB): 500 mm - Build height (BH): 105 mm - Support feet: optionally available - Conveyor speed (v m/s): adjustable up and down via frequency inverter - Drive: SEW gear motor S37 DT80N4/MM07/BW1 - Electrical data: 50 Hz, V380-500, kW 0.15 / 0.75 / S1 - Return roller (UR): Ø = 34 mm - Drive drum (AT): Ø = 81 mm - Belt: Type HSL 8 E - Year of manufacture: 2001 - Incline / decline: adjustable Optionally available: - Support legs - Side guides Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional consultation, feel free to contact us. Please get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor GF 630-650-500 RA1478 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW brand motor with MOVIMOT frequency inverter to control the speed. Side guides and/or light barriers can be installed upon request at an additional cost. Supports are not included in the delivery; these are available as an option upon request. The pictures shown depict the conveyor system as it is currently installed in a logistics center. Technical data: Conveyor length (NL): 630 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support feet: optionally available Njdpfx Ask Abccobmodc Conveying speed (v m/s): infinitely adjustable via frequency inverter (both up and down) Drive: SEW geared motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz, V380-500, kW 0.075 / 0.37 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of manufacture: 2001 Optional accessories: Supports Side guide (one-sided or double-sided) All prices net, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For personal, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Incline/Decline Conveyor GF 7000-650-500 RA1480 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW brand motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or photoelectric sensors can be installed upon request at additional cost. Support legs are not included in the standard delivery but are available as optional accessories on request. The images shown of the conveyor system were taken while the unit was still installed in a logistics center. Technical specifications: Conveyor length (NL): 7000 mm (upper straight section 1000mm + curve 500mm + inclined section 5500mm) Frame width (NB): 650 mm Belt width (GuB): 500 mm Installation height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down using frequency inverter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Return pulley (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of manufacture: 2001 Incline/decline: adjustable Optional accessories: Support legs Single-sided or double-sided side guides All prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional consultation, please do not hesitate to contact us. Just give us a call or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Ndodek Abckjpfx Abmoc Best regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor GF 780-650-500 RA1430 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor and MOVIMOT frequency inverter for variable speed control. Side guides and/or photoelectric sensors can be fitted upon request for an additional charge. Support stands are not included in the scope of delivery but are optionally available on request. The pictures shown display the conveyor system still installed at a logistics center. Technical data: Conveyor length (NL): 780 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): infinitely adjustable via frequency inverter Drive: SEW geared motor R17DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: - Movi-Mot frequency inverter - Support stands Ndsdpfok Abumox Abmsc - Single-side and double-side side guide Net prices, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with your project planning and implementation. We look forward to hearing from you. Best regards, The Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Sąlyga: naudotas, Gamybos metai: 1999, Transnorm Belt Conveyor Belt Conveyor 1252-600-500 Flap Passage RA2049 The Transnorm belt conveyor is from the year 1999 and is in good (used) condition. It is ideally suited as a feeder conveyor and is equipped with a Van der Graaf brand motor. Supports are not included in the scope of delivery but are available as an option. Technical Data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional Conveyor length (FL): 1251 mm Nominal/Outer width (NB): 600 mm / 735 mm with bearing seat Belt width (GB): 500 mm Overall height (BH): 85 mm Motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: 0.25 kW 230/400 V 50Hz Conveying speed: 1.25 m/s Scope of delivery: without supports (please inquire if required) Optional: Supports with dampers Side guides Frequency inverter We can also extend the conveyor belt to your required measurement. Njdpomqty Hsfx Abmsdc Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor GF 1810-650-500 RA1438 The Lippert conveyor belt dates from 2001 and is in good (used) condition. The belt conveyor features an SEW brand motor with MOVIMOT frequency inverter for speed control. Side guides and/or photoelectric sensors can be optionally installed at additional cost. Support legs are not included in the scope of delivery but are available on request. The images shown of the conveyor system were taken while still installed in a logistics center. Technical data: Conveyor length (NL): 1810 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): continuously adjustable up and down via frequency inverter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of manufacture: 2001 Optionally available: Support legs Side guides Prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please feel free to contact us. Reach us easily by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Nodpfek Abapsx Abmjdc Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor GKF 1650-750-550 IR600 70° Right Nodpfok Abazox Abmjdc RA1441 The Transnorm belt curve is in good (used) condition and is fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are available as an optional extra upon request. Belt curves are frequently used in intralogistics for in-plant transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to low-tension drive across the entire belt width, extended operating periods are no issue. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical data: Model designation: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 1650 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Build height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° Support legs: optional Conveying speed (v m/s): adjustable up and down via frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, KT36 (wear visible in pictures) Year of manufacture: 2001 Special feature/accessories: side guides on both sides included Optionally available: Support legs Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or by email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Incline Belt GF 6960-650-500 RA1459 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor and a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or photoelectric barriers can be installed on request for an additional charge. Support stands are not included in the delivery but are optionally available upon request. The photos shown depict the conveyor system while still installed in a logistics center. Technical Data: Conveyor length (NL): 6960 mm (incline belt) Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): speed adjustable via frequency inverter (upwards and downwards) Drive: SEW geared motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Return drum (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of manufacture: 2001 Incline / Decline: adjustable Optional extras: Support stands Single-sided or double-sided side guides Ndedpfek Abbfjx Abmoc Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and is in good used condition. The belt conveyor is equipped with an SEW-branded motor with a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Conveyor supports are not included in the scope of delivery but are optionally available upon request. Njdpfx Abjk Abdpemodc The displayed images of the conveyor system were taken while it was still installed in a logistics center. Technical specifications: Conveying length (NL): 1,360 mm Frame width (NB): 750 mm Belt width (GuB): 600 mm Construction height (BH): 105 mm Belt height: 550 mm Base dimensions: 1,170 x 900 mm Total height: 1,070 mm Tilt height difference: 300 mm Conveying speed (v m/s): Infinitely adjustable via frequency inverter (upwards and downwards) Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilt motor: 50Hz V220/400, kW 0.55 / S1 Return roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of manufacture: 2001 Optionally available: - Supports - Single-sided or double-sided side guides All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please do not hesitate to contact us. You can reach us easily by phone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Incline Belt GF 4920-550-400 RA1606 The Lippert conveyor belt was manufactured in 2001 and is in good used condition. The belt conveyor is equipped with a SEW-brand motor and a MOVIMOT frequency inverter for speed control. Side guides and/or photoelectric barriers can be installed on request for an additional charge. Support legs are not included in the scope of delivery; these are available optionally upon request. Nedpfx Aok Abd Njbmsdc The photos of the conveyor system shown were taken while the unit was still installed in a logistics center. Technical data: Conveying length (NL): 4920 mm (lead-on belt + incline belt with curve and upper straight section) Frame width (NB): 550 mm Belt width (GuB): 400 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): infinitely adjustable via frequency inverter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 Incline / Decline: adjustable Optional accessories: Support legs Side guide (single- or double-sided) Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. You can contact us by phone or email. We will be happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Incline Belt GF 1995-550-400 Reference: RA1656 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW brand motor with MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be mounted at additional cost upon request. Support stands are not included in the scope of delivery, but are optionally available upon request. The shown images of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Conveyor length (NL): 1995 mm (feed belt 560 mm + incline belt 1435 mm) Frame width (NB): 550 mm Belt width (GuB): 400 mm Construction height (BH): 105 mm Ndjdok Abd Tjpfx Abmec Support feet: optionally available Conveyor speed (v m/s): infinitely adjustable up and down via frequency inverter Drive: SEW geared motor DT80K4/BMG/MM05 Electrical data: 50 Hz V380-500, kW 0.11 / 0.55 / S1 Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: type HSL-8E Year of manufacture: 2001 Incline / decline: adjustable Optional accessories: Support stands Side guides (single-sided and double-sided) Prices are net plus VAT, ex central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional consultation, simply contact us. Please contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2014, Transnorm kryptinis konvejeris su įstrižinėmis ritinėliais, įstrižinis transporter 2900-700-685 RA2281 Gamintojas: Transnorm Metai: 2014 Ritinėlių plotis (RB): 685 mm Nominalus / išorinis plotis (NB): 700 mm Ilgis: 2900 mm Ritinėlių diametras: 50 mm Atstumas tarp ritinėlių: 60 mm Ritinėlių konvejerio pavara: SEW motor-reduktorius Konstrukcijos aukštis: 100 mm Transportavimo greitis: kreipkitės dėl informacijos Ritinėlių kampas: apie 5° Njdpjru S Idefx Abmsdc Papildomai: Kojelės Šoninė kreipiančioji Reguliuojamas transportavimo greičio diapazonas su dažnio keitikliu Kaina be PVM iš Dr. Sonntag GmbH & Co. KG centrinio sandėlio 97076 Viurcburge Individualioms ir profesionalioms konsultacijoms kreipkitės į mus. Susisiekite su mumis telefonu arba el. paštu. Mes mielai padėsime planuojant ir įgyvendinant jūsų projektus. Laukiame jūsų užklausos. Pagarbiai, Jūsų Dr. Sonntag GmbH & Co. KG komanda Jūsų specialistas ir kontaktinis asmuo intralogistikos klausimais

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2009, Transnorm Belt Conveyor Belt Band Folding Belt Smart Sort GF 1450-800-700 RA2037 Technical Data: Conveyor length (NL): 1450 mm Frame width (NB): 800 mm, 150 mm with motor Belt width (GuB): 700 mm Height (BH)/Transfer height: 800 mm Conveying speed (v m/s): 1.47 Drive: SEW geared motors, with brake for angle adjustment Electrical data: 50Hz V380-500, 0.37 kW band drive and 2.2 kW angle drive Lower sorting height: 500 mm Upper sorting height: 1200 mm Angle adjustment speed: 1s from minimum to maximum Year of manufacture: 2009 Special features / Accessories: 4x proximity sensors for angle determination Available as options: Side guide single-sided and double-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Ndjdpfxotg Dhfo Abmec Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Transnorm įleidimo konvejeris 30° 1750-1000-800 RA2305 NAUJAS Gamintojas: Transnorm Pagaminimo metai: 2022 Įleidimo kampas: 30° Ilgis per centrą: 1670 mm Juostos plotis (RB): 800 mm Rėmo aukštis: 300 mm Nominalus / išorinis plotis (NB): 1000 mm, 1200 mm su varikliu Transporto greitis: su dažnio keitikliu, leidžiančiu nuolat reguliuoti greitį nuo 0,25 iki 0,75 m/s Ndodpfx Ajuf Hx Tobmsc V230/400 Galia 2,2 kW Šoninės sienelės aukštis: 200 mm Komplektacija: su varikliu ir šoniniu vedimu Papildomai: Atramos Kaina be PVM iš centrinio sandėlio Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Norėdami gauti individualią, profesionalią konsultaciją, tiesiog susisiekite su mumis. Susisiekite telefonu arba el. paštu. Mielai padėsime jums planuojant ir įgyvendinant Jūsų projektus. Laukiame jūsų užklausos. Pagarbiai, Jūsų Dr. Sonntag GmbH & Co. KG komanda Jūsų specialistas ir kontaktinis asmuo dėl intralogistikos

Sąlyga: naudotas, Gamybos metai: 1996, Transnorm Belt Conveyor 1880-400-300 RA1391 The Transnorm belt conveyor was manufactured in 1996 and is in good (used) condition. It is equipped with an SEW brand motor. Support stands are not included in the delivery scope; these are optionally available. Technical Data: Manufacturer: Transnorm Type: TS 1200 Belt Conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional Conveyor length (FL): 1880 mm Nominal/outer width (NW): 400 mm Belt width (BW): 300 mm Motor type: SEW gear motor Motor power: 0.37 kW, 220–240V Conveying speed: 1.05 m/s; adjustable conveying speed with frequency converter available at extra cost Drive: head drive Scope of delivery: without support stands (please inquire if needed) Optional: support stands Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For personalized, expert advice, please contact us directly. Feel free to get in touch by phone or email. We are happy to support you in planning and realizing your projects. We look forward to hearing from you. Best regards, Njdpfxek Abgco Abmjdc Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor Left GKF 85°-775-550 IR600 RA1658 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with an SEW gear motor. Support stands are not included in the scope of delivery but are optionally available on request. Belt curves are widely used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended run times are no problem. Tapered drums and a specially designed belt guidance system ensure maximum running smoothness. Technical data: Model designation: Belt Curve Conveyor TS 1600-105 Conveying length at reference radius (NL): 1703 mm Frame width (NB): 775 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inside radius (IR): 600 mm Conveying angle: 85° degrees Gradient: 175 mm / 85° degrees = 741.2 mm per revolution (360°) Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW gear motor with brake SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, KT36 (wear as shown in pictures) Year of manufacture: 2001 Optional extras available: Support stands Side guide (single or double sided) Nedpfx Ajk Abfbebmodc Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and expert partner for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2007, Data Sheet Retrofit Item GE 22.10 RA1026 Gebhardt Belt Conveyor 7500-610-500+900-610-500 Type: Gebhardt 300.10 with aluminium base frame Year of manufacture: 2007 Lead-in belt length: 900 mm Total main belt length: 7,449 mm (incl. upper curve segment + straight section) Upper curve segment length: 392 mm Upper straight section length: 3,830 mm Total width: 610 mm Belt width: 500 mm Lead-in belt type: smooth Main belt type: lightly textured Drive station: central drive with tensioning station Drive: SEW-Eurodrive geared motor Conveying speed: approx. 0.3 m/sec (approx. 18 m/min) Height top of belt: H1 bottom + 1,700 mm / H2 top 2,800 mm Height difference: +1,100 mm, incline/decline 19° or 34% Usage: suitable for ascent and descent operation, any other incline angle adjustable, upper curve and supports adaptable Scope of delivery: without supports (available on request) Optional: supports Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. Nsdpfx Aek Aa Arebmodc We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics