Płazdrew Zdzisław Płaza

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 10229, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 25 000 h, galia: 13 kW (17,68 AG), įėjimo įtampa: 400 V, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 200 mm, šlifavimo juostos ilgis: 1 800 mm, šlifavimo aukštis: 190 mm, aukščio reguliavimo tipas: elektrinis, pavaros tipas: elektrinis, bendras aukštis: 1 890 mm, bendras ilgis: 2 070 mm, bendras plotis: 1 020 mm, bendras svoris: 1 500 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Įrenginys labai geros būklės, mažai naudotas, yra galimybė atnaujinimui pagal susitarimą. Nkjdpfxsyt Hkus Aglew

Būklė: naujas, Number of sanding units: 2 pcs Sanding width: 290 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 3000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window profiles, etc. Robust top-quality design with long cast iron tables, brushing and finishing device, and conveyor belt feed. Suitable for high continuous loads even with higher material removal rates. - Offset arrangement of sanding and finishing units above and below - Direct-drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad enables high material removal with a uniformly flat contact area - Maintenance- and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional accuracy - Auxiliary cooling of sanding zones for cooler sanding and longer abrasive belt lifespans - Forced-guide pneumatic belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-dimensioned linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom side) via precision lead screw with measurement display via dial ring (resolution 0.1mm) - Abrasive belt tensioning via pneumatic cylinder with constant clamping pressure - Quick abrasive belt change with pneumatic belt release in seconds - Adjustable belt tracking during changeover - Electro-pneumatic compressed air monitoring - Feed safety device via contact roller for excessively thick workpieces - Workpiece transport via calibrated slip-resistant and non-slip conveyor belts over heavy, 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Continuously variable feed gear motor for rapid adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the infeed side - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical Data: Njdpfxjyrty Te Aglekw - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 300 mm - Working width: 290 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 7.5 kW - Feed motor: 1.0 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units, each 0.37 kW, with fiber brushes D 120 x 300 mm - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2,105 mm - Length with control panel: 2,490 mm - Width: 980 mm - Height: 1,910 mm - Weight: approx. 1,650 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE version ----- Price of the above-mentioned machine on request! ----- Optional accessories at extra cost: Workpiece blow-off: - Arranged via nozzles above and below at the machine outfeed, pneumatically controlled Abrasive belt blow-off: - Via nozzles directly at the radii of the tension rollers, situated within the dust extraction, timer-controlled on/off, each 5 sec, can be switched on separately Disc unit ...

Būklė: naujas, Number of grinding units: 4 pcs Sanding width: 190 mm Max. sanding height: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single piece wood sanding machine with additional cross brushing unit (discs) and longitudinal brushing unit (roller) for sanding solid wood such as window scantlings, etc. Robust top-quality construction with long cast iron tables and conveyor belt feed. Suitable for heavy-duty continuous operation, even with higher material removal rates. 1. Belt sanding unit with CERMET sanding shoe for pre-sanding 2. Disc unit for cross sanding to remove fibers 3. Roller unit for longitudinal sanding to achieve a directed finish along the grain - Offset arrangement of sanding and finishing units above and below - Directly driven rubber-coated contact rollers for slip-free power transmission - Combined sanding via roller and shoe for high material removal rates with a flat engagement zone at the same time - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and increased belt life - Forced, pneumatically controlled belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at the tension rollers - Integrated brush sanding units (crosswise and lengthwise) with dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment at the bottom via precision spindle with readout by scale ring (resolution 0.1 mm) - Sanding belt tension via pneumatic cylinder with constant tension - Sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece transport via calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feed - Continuously variable feed gear motor for fast adaptation to various wood types - All motors electrically protected - Ergonomically arranged operating controls at the infeed side - Digital thickness display (0.1 mm resolution) with a modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Belt length: 1800 mm - Belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Brush sanding units Disc D=max. 200 mm Roller D=max. 270 mm - Extraction connections: 2 x 120 mm and 2 x 180 mm - Pneumatic connection: 6 bar - Working height: 870 mm External dimensions: - Length: 2600 mm - Length with rollers: 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 V, 50 Hz, 3P Nkedpeyrty Hofx Aglew - CE compliant ----- Price of the above-mentioned machine upon request! ----- Optional accessories at an extra charge: Workpiece air blow-off - medium...

Gamybos metai: 2022, būklė: naudotas, Number of sanding units: 6 pcs. Maximum sanding height: 120 mm Power: 12 kW Sanding machine ECOLINE QQSAND 6 - Year of manufacture: 2022 - Original price: EUR 89,000 Sanding of individual parts after the planing machine. Sanding of raw surfaces. Sanding of top and bottom surfaces. Nkedjynnttspfx Agljw Equipment This sanding line is equipped with 6 sanding units: - Upper sanding disc, D 400 mm, 1.1 kW. Equipped with automatic exchange system - Upper sanding disc, D 400 mm, 1.1 kW. Equipped with automatic exchange system - Upper sanding brush, D 320 mm, L=250 mm, 1.1 kW - Lower sanding disc, D 400 mm, 1.1 kW. Equipped with automatic exchange system - Lower sanding disc, D 400 mm, 1.1 kW. Equipped with automatic exchange system - Lower sanding brush, D 320 mm, L=250 mm, 1.1 kW System Features - All tools are controlled by frequency inverters. - All sanding brushes are equipped with quick-change individual sanding lamellae. - All discs are fitted with air jets for optimized cleaning and cycle time. - Sanding discs are equipped with hook-and-loop fastening system. - Controlled start/end of work to prevent edge breaking on the parts. - The unique sanding system of this machine guarantees the best pre-sanding surface results. - Constant working height; PLC and industrial software allow for line integration. - Infinitely variable speed control for discs, brushes, and feed via full frequency inverter equipment. - Right/left rotation of discs and brushes with different abrasive grits possible. - Additional settings for brushes and discs to balance abrasive utilization and to adjust sanding pressure on the surfaces. - Low follow-up costs thanks to replaceable lamellae. - Low operating noise thanks to the fully enclosed machine housing. - Fully encapsulated machine housing ensures a clean environment, resulting in dust-reduced and protected workspace. - Easy maintenance and setup. - Robust machine bed made from steel tubing guarantees maximum rigidity, stability, and flatness. - All unit drives run on linear ball guideways, enabling high load capacity with precision. - 2 separate driven feed belts. Gear motors for each belt: 0.37 kW. - Above the units are upper pressure rollers, D 80 mm, rubber-coated, to securely hold workpieces during feeding. - All units have extraction housings with corresponding extraction nozzles. Cover plate with extraction port. - Machine doors are equipped with electrical safety devices to ensure operator safety. - Machine doors feature windows to monitor workpieces during operation. - Feed speed range from 2 to 12 m/min. - Feed direction: right to left. - Steel fence (zero point) on the right side of the machine. Touch Panel Control 12.7" - The system is equipped with a programmable logic controller (PLC). - Operation of work cycles via user-friendly touch panel. - Large storage capacity of the PLC. - Clear home page display. Fast and simple calculation. - Setting the duration of abrasive operation via touch screen. - Remote service support via our service team. - Large and ...

Gamybos metai: 2014, būklė: naudotas, Šlifavimo agregatų skaičius: 6 vnt. Šlifavimo plotis: 180 mm Maks. šlifavimo aukštis: 150 mm STAEHLE šlifavimo staklės, modelis Gloria/Saturn E 180 RF ----- Stähle Hess galutinio šlifavimo staklės modelis Saturn E 180 RF (anksčiau Gloria) Nedpfjx Dng Djx Aglokw su 2 šlifavimo agregatais, papildomai viršutine ir apatiniu Roto Finish šlifavimo įrenginiu. 1 viršutinis šlifavimo juosta 1 apatinis šlifavimo juosta 2 viršutinės Roto-Finish šlifavimo įrenginiai 2 apatinės Roto-Finish šlifavimo įrenginiai Išsami techninė informacija pateikta gamintojo pridėtame PDF faile. Parduodama pagal kliento užsakymą. Nuotraukos yra iš mūsų archyvo ir padarytos prieš pristatant stakles klientui. (Techniniai duomenys pagal gamintojo informaciją – be garantijos!)

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Feed belt speed: 10 m/min - Belt dimensions: 420x1800 mm (please consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operation from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Pneumatic pressure sanding pad - Automatic belt rotation direction change MACHINE CHARACTERISTICS: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (protected at 35A) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and lift-off of rollers - Pneumatic supply: 6 to 8 bars - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m3/h Velocity: 20 m/sec - CE marking, front/rear emergency stops, lockable main isolator Nkodpfx Agox A Unxelow Note: For your satisfaction, we remind you that belts must be slackened when the machine is not in use and that all moisture must be avoided, including condensation (dew point) inside your premises in winter. Dimensions: 1500x1300x2050 h.mm Weight: 1200 kg

Gamybos metai: 2022, būklė: naudotas, Number of sanding units: 6 pcs. Sanding width: 45–165 mm Max. sanding height: 45–92 mm Weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ---- Full description available as PDF attachment! Brief description: Machine with infeed conveyor and automatic height detection. It features 2 top and 2 bottom sanding discs, each integrated with a brushing unit. Technical manufacturer description: Ecoline Q-Sand: the ideal sander for scantlings and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand ensures maximum precision and uniformity. It is equipped with sanding discs, flap brushes, and a double disc for more effective material removal, enhancing adhesion for subsequent treatments. Q-Sand can be installed in-line or used as a standalone unit due to its fully autonomous operation. It is also ideal for window frames, beams, and custom products, optimizing processing times with automated systems and advanced production control. ---- Price for the above-mentioned machine on request! ---- (Technical information as per manufacturer's data – subject to change!) All prices quoted are net plus statutory VAT. The video is provided by Ecoline and shows a new machine. Nedpjxyafkjfx Aglokw

Gamybos metai: 2007, būklė: naudotas, Control: Siemens 840D Grinding wheel diameter: 900 mm Workpiece grinding width: 144 – 152 mm Workpiece grinding dimension: 22 – 25 mm Rotational speed at 24 m/s: 1,425 rpm Peripheral speed max.: 25 m/sec Working power: 37 kW Total power requirement: 75 kW Weight approx.: 18.0 t Space requirement approx.: L 4.9 x W 4.9 x H 2.6 m In our assessment, the machine is in good used condition. Double-Sided Face Grinding Machines The machine was previously used for the production of connecting rods. Nkjdpjxq Hkuofx Aglew Accessories, illustrated tools, and clamping devices are only included in delivery if expressly stated in the additional information. Modifications and errors in technical data and specifications as well as prior sale are reserved!

Būklė: naujas, Number of sanding units: 1 Sanding width: 150 mm Maximum sanding height: 150 mm Löwer Edge Finishing Machine MiniSpin N ----- Machines for final and intermediate sanding of edges and profiles, featuring a sanding spindle that can be set horizontally or vertically. Motor: 0.75 kW Spindle in vertical position for processing edges Spindle in horizontal position, pivoted to the side, for processing longer profile rods, etc., or in combination with a combo sanding head for sanding edges with a flap disc Nsdpfxjxmk Ays Aglekw Sanding head pivotable +/- 20° for processing angled edges Working height / width: 150 mm Max. roller/brush diameter: < 300 mm Frequency inverter for stepless spindle speed adjustment: 200 - 800 rpm Table size: 400 x 800 mm Two selectable rotation directions Operating voltage: 110 / 240 V, 50 / 60 Hz Extraction port: D=100 mm Weight: approx. 100 kg Including slotted base body D=180, L=150, fitted with Smartflex abrasive flaps CE version ----- Machine in the above specification available on request! ----- Optional accessories at extra cost: Additional combo sanding head for MiniSpin N: EUR 740.00 Consisting of a sanding disc D=180 mm with 20 slots and a sanding roller D=180 mm L=75 mm with 36 slots, fitted with SmartFlex abrasive flaps Combo sanding head for MiniSpin N instead of standard sanding head: Surcharge EUR 110.00 Consisting of a sanding disc D=180 mm with 20 slots and a sanding roller D=180 mm L=75 mm with 36 slots, fitted with SmartFlex abrasive flaps Additional standard sanding head: EUR 630.00 D=180 mm L=150 mm, fitted with SmartFlex abrasive flaps ----- (Technical data as per manufacturer's information - no liability accepted!)

Būklė: geras (naudotas), Gamybos metai: 1996, abišalinis viršaus-apačios šlifavimas su šlifavimo padu ir dulkių šepečiu maks. šlifavimo plotis 300 mm Njdpfoxfl Eaex Aglokw maks. šlifavimo aukštis 200 mm gamybos metai 1994 su CE ženklinimu

Būklė: naudotas, Number of sanding units: 2 Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS GLORIA – 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s Description: ---- Compact design constructed according to modern principles. Quiet and vibration-free operation thanks to a torsion-resistant, stable machine housing and special insulation. Safety features compliant with EU Machinery Directive, certified as “dust tested.” Nkjdpfx Agsv D Rg Djljw Offset sanding units equipped with large tension rollers for effective heat dissipation and stable belt guidance. Sanding units with forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Airborne dust extraction at the large tension rollers. Integrated sanding belt air-blow system for extended belt lifespan. Integrated brush and finishing device, adjustable by threaded spindle, with large dust extraction. Motorized adjustment of sanding thickness for the entire upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe proportioned for optimal grit load. Hardened and ground sanding rollers. Maintenance-free and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional stability. Sanding belt tensioning via pneumatic cylinders. Belt change by pneumatically actuated belt release. Adjustable belt tracking during belt change. Electro-pneumatic pressure monitoring of compressed air supply with visual fault indicator. Automatic machine stop upon belt breakage or if infeed safety device (with integrated wood thickness control) is triggered. Visual indicator on control panel. Feed device and proven, calibrated, non-slip transport belts on precision-ground tables and spring-mounted pressure rollers. Cardan drive for consistent wood feed. Continuously variable feed speed. Chip removal adjustment via precision lead screw with scale ring (resolution 0.1 mm). Ergonomically arranged controls on the machine front: Top sanding and brush unit, bottom sanding and brush unit, workpiece transport, sanding thickness setting, operation indicators, fault indicators. Integrated control panel with lockable main switch. All motors electrically protected against overload. Technical Data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable, 5–25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20–25 m/sec Extraction connection ports: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Būklė: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s Njdpovu Hgbefx Aglekw - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: naujas, Number of sanding units: 2 pcs Sanding width: 190 mm Max. sanding height: 2–180 mm Nkjdpfx Agevu Hdtjljw LÖWER Double-Sided Sanding Machine DSM 2000 ----- Double-sided single-piece wood sanding machine for processing solid wood such as window profiles, etc. Robust, heavy-duty design with long cast-iron tables, brushing and finishing attachments, and conveyor feed. Suitable for continuous heavy-duty operation even with high material removal rates. - Offset, top and bottom sanding and finishing units - Direct-driven, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad for high material removal and an even contact area - Maintenance-free and wear-free CERMET-coated sanding pads, featuring excellent thermal conductivity and dimensional stability - External cooling of sanding zones for cooler grinding and extended sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at sanding rollers; air-borne dust extraction at pressure rollers - Integrated brushing and finishing unit with large dust extraction system - Motorized sanding thickness adjustment via precision leadscrews and large-diameter linear ball bearing sets on case-hardened and ground precision shafts, featuring dust and dirt protection - Chip removal adjustment from below via precision leadscrew with indicator ring (resolution: 0.1 mm) - Sanding belt tensioning via pneumatic cylinder for constant tension - Quick-change sanding belts with pneumatic belt release in seconds - Sanding belt run can be adjusted when changing belts - Electro-pneumatic air pressure monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport on calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast-iron tables with finely planed surface, spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feeding - Feed gear motor with three selectable feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls at the workpiece infeed side - Automatic workpiece thickness sensing (no pre-measurement required) - Digital thickness display (resolution: 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speeds: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brushing units with fiber brushes D 120 × 200 mm at 0.37 kW each - Extraction ports: 2 × 120 mm and 2 × 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3 phase - CE compliant ----- Base price of the machine on request! ----- Optional accessories at additional cost: Infinitely variable feed 4–20 m/min. for speed adjustment...

Būklė: naujas, Number of sanding units: 8 pcs. Sanding width: 180 (260) mm Max. sanding height: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, denibbing, and edge breaking) or intermediate sanding of profiled window bars. Features Softdisc technology for visible surfaces as well as automatic profile and width adjustment. - 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm 1 top-mounted softdisc unit Ø=200mm, 0.75kW, 1 top-mounted lamella roller unit L=200mm, 0.75kW, 1 bottom-mounted softdisc unit Ø=200mm, 0.75kW, 1 bottom-mounted lamella roller unit L=200mm, 0.75kW, 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm - All sanding units feature linear guidance via linear ball bearing sets on hardened shafts - Time-controlled dipping of all lamella roller units directly over the entering edges of the workpieces. This dipping allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable sanding lamella speed via frequency converters for adjusting the sanding intensity (separate for discs, wide rollers, and side rollers) - Disc units as Softdisc with hook-and-loop fastening for sanding discs (wood sanding) - Infeed via three lower and one upper conveyor belts and spring-loaded pressure rollers, with infinitely variable speed 4–15m/min - Touch panel adjustment of parameters: workpiece thickness, workpiece width (left side units individually), dipping depth of side units, spindle speed, feed speed - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width detection and profile recognition as well as automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically sequenced powered infeed roller, automatic clamping of the workpiece, and feeding after unit adjustment - Signal lights red/green for operation status indication - Shortest workpiece length: 380mm - Conveyor belt width: 200mm - Max. workpiece width: 180mm (260mm possible with flipping process) - Workpiece height: 12–160mm - Extraction ports: 4 x 100mm and 2 x 80mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price of the above machine on request! ----- Optional accessories (surcharge): Set of replacement lamella strips for Leistomat SD-200 consisting of Wide units: 30 strips EH45 / 200 - 7 (rollers) 30 strips EH45 / 200 - 20 (rollers) Rabbet units: 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid with 30 grooves 50mm long Set of replacement lamella strips for SmartFlex lamella disc consisting of Nsdpfx Aovnv Uhjglekw 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc D=200mm, grit 220 with velour (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc D=200mm, grit 280 with velour (hook-and-loop), pack of 100 pcs. -----

Būklė: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush Nksdpovnv Tqjfx Aglsw - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Gamybos metai: 1986, būklė: labai geros būklės (naudotas), For sale: Reckmann LM 161 profile grinding machine. The machine is in very good condition and has been rarely used. Nsdpfx Ajuyg Rnegljkw

Būklė: naudotas, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Nksdpst Tqy Eofx Aglow Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Gamybos metai: 2001, būklė: geras (naudotas), Table diameter: 200 mm Workpiece height: 100 mm Number of wheels: 1 Control: Robot CNC Total power requirement: 6 kW Machine weight approx.: 1.8 t Required space approx.: 1.83 x 2.04 x 2.1 m Technical data - Grinding capacity: Ø 0.025 – 12.7 mm - Bar diameter: Ø 1.0 – 12.7 mm - Grinding length: W15 (option W20) - Z-axis: 35 mm, resolution: 0.5 µm - X-axis: 25 mm, resolution: 0.1 µm - Y-axis: 286 mm, resolution: 0.5 µm - U-axis: 15 mm, resolution: 0.1 µm Head motor: 0.70 kW, rotation: 300 – 3000 rpm Grinding – Rough grinding: 1.5 kW, spindle Ø: 60 mm, grinding wheel diameter: Ø 200 mm, cutting speed: 30 m/sec - Finishing: 0.75 kW, spindle Ø: 100 mm, grinding wheel diameter: Ø 150 mm, adjustable cutting speed - Dimensions (L x W x H): 1830 x 2040 x 2100 mm Nksdpfx Aott Tb Djglow - Weight: approx. 1800 kg Accessories - Loading and unloading robot - Fire protection system CONTROL - Axes: 4 axes + 2 programmable robots - Simultaneous linear interpolation of all 4 axes + cylindrical interpolation of 2 robot axes