Hidrauliniai vieno stulpo presai pirkti naudotą (69)

Sąlyga: geras (naudotas), Gamybos metai: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Downward speed: 48 mm/s Upward speed: 330 mm/s Hfodev Rwu Uepfx Abmsr Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Overall dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations. Equipped with oil-hydraulic drive, pressure-, time- and stroke-dependent control, front light barrier (Sick), two-hand operation.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1995, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: H95-2601, bendras aukštis: 2 400 mm, stalo aukštis: 830 mm, įrengimo aukštis: 750 mm, bendras plotis: 1 100 mm, bendras ilgis: 1 200 mm, gerklės gylis: 260 mm, spaudimo jėga: 16 t, stalo plotis: 700 mm, stalo ilgis: 460 mm, darbinis greitis: 180 mm/s, bendras svoris: 2 700 kg, atbulinės eigos greitis: 450 mm/s, įvesties srovės tipas: trifazis, eigos ilgis: 370 mm, alyvos bako talpa: 500 l, įėjimo įtampa: 400 V, presavimo greitis: 40 mm/s, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Presas šiuo metu atliekamas kapitalinis remontas. Cilindrų tarpinės buvo pakeistos, hidraulinė pompa patikrinta dėl funkcionalumo. Įrengtas hidraulinis saugumo blokas, atitinkantis naujausius saugos reikalavimus. Visiškai nauja elektros instaliacija ir PLC valdymas, įskaitant saugos šviesos uždangą priekyje, užtikrina, kad presas bus beveik kaip naujas. Hedpfx Ajxyxyysbmofr

Sąlyga: naujas, Gamybos metai: 2022, Estimated equipment weight: 3,500 kg Equipment dimensions (W x D x H) (approx. external): 1354 x 2005 x 2595 mm Table dimensions (working area) W x D (table size): Ø1050 mm Clearance between table and ram (daylight): 350 mm Ram stroke (ram travel): 300 mm Drive power (motor power): 14.24 kW Motor speed: 1,500 rpm Pump flow rate: 44.50 LPM Pump-motor displacement ratio: 27.59 cm³/rev Working force (cylinder force): 100 t Return force: 10 t Approach speed: 250 mm/s Working speed under pressure: 3~15 mm/s Return speed (lifting speed): 150 mm/s Working pressure (maximum operating pressure): 210 bar Number of cylinders: 2 pcs Hjdpfx Abshmi T Uemsfr Rod diameter: 41.76 mm Cylinder diameter: 250.97 mm Cylinder stroke (ram travel): 300 mm Tank capacity (oil tank volume): 350 litres Extraction cylinder: 5 t Extraction cylinder stroke (ram travel): 150 mm

Sąlyga: geras (naudotas), Gamybos metai: 1981, mašinos/transporto priemonės numeris: 022-009-36, Pasiūlymas 24374 Techniniai duomenys: - didžiausia presavimo jėga: 100 t - didžiausias stūmoklio eiga: apie 500 mm - eigos greitis: 25 mm/s - grįžimo greitis: 125 mm/min - montavimo aukštis: apie 1000 mm - iškyša iki stūmoklio centro: 380 mm - stūmoklio tvirtinimo paviršius: 530 x 400 mm - stūmoklio tvirtinimo kaištis: 40 mm - stalo matmenys: 750 x 560 mm - stalo skylė / praėjimo anga stalo viduryje: 200 mm - stalo aukštis nuo grindų: 720 mm - alyvos kiekis: apie 200 ltr - pavara: 400 V / 11 kW Hfsdsxuhzcjpfx Abmer - užimama vieta apie: plotis 1150 x aukštis 3250 x gylis 1850 mm - svoris apie: 4600 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 350 mm, bendras plotis: 1 000 mm, bendras ilgis: 1 300 mm, spaudimo jėga: 10 t, stalo plotis: 500 mm, stalo ilgis: 400 mm, darbinis greitis: 100 mm/s, bendras svoris: 1 300 kg, atbulinės eigos greitis: 450 mm/s, stūmoklio plokštės plotis: 360 mm, ramplokštės ilgis: 280 mm, tarpas tarp stulpų: 630 mm, eigos ilgis: 400 mm, Įranga: dokumentacija / vadovas, Hydraulic Press PYE 10 S/1M. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: - Maximum pressing force: 10 tons - Operating pressure: 16 MPa - Upper table: 360 x 280 mm - Lower table: 500 x 400 mm - Clearance: 630 mm - Cylinder stroke: 400 mm - Downward speed: 100 mm/sec - Upward speed: 450 mm/sec - Power requirement: 5.2 kW - Weight: 1,300 kg - Height: 2,350 mm, Length: 1,300 mm, Width: 1,000 mm Technical condition of the machine: Very good. The machine has undergone a general overhaul. Hsdpfswb Dhnsx Abmsfr

Sąlyga: naudotas, Pressing force: 50 t Throat depth: 265 mm Hfjdpfxswyplco Abmor Stroke: 250 mm Installation height: 400 mm Table clamping area approx.: 700 x 450 mm Ram clamping area approx.: 550 x 300 mm Table height above floor: 850 mm Rapid traverse down: 32 mm / s Working speed: 6.3 mm / s Rapid traverse up: 42 mm / s Power requirement: 4 kW Dimensions LxWxH: 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard equipment: Siemens S7-1200 control, working cycle, inching mode, foot switch, mechanically adjustable stop, light curtain Automation: Optionally available including HORST robot on request.

Sąlyga: geras (naudotas), Gamybos metai: 1995, For sale: Hydraulic press PYE-63S The price listed in the advertisement is the net amount, to which VAT must be added. Hfodpfxjv Uxttj Abmer

Sąlyga: geras (naudotas), Pressure: 63 tons Stroke: 400 mm Installation height: 700 mm Hfodpfx Aoch Dacebmsr Table size: 1800 x 500 mm MARCELS MASCHINEN CH

Sąlyga: geras (naudotas), Gamybos metai: 2014, tūrio srautas: 1 570 m³/val, Becker Variair Vacuum Pump RV 2.1944/10 Relative pressure: +410 mbar Volumetric flow rate: 1570 m³/h Hsdpfx Abov Anv Tjmsfr Weight: 60 kg + 21 kg inverter

Sąlyga: naujas, Gamybos metai: 2021, Here are the technical specifications of the machine on offer: If the press does not precisely meet your requirements, simply click to request a custom quote tailored exactly to your needs: Contact us for a personalized offer. HIDROBRASIL manufactures presses precisely to your specifications at surprisingly competitive prices! Technical Data & Information: Hydraulic 17 T C-Frame Press Hfedpogrki Sofx Abmjr C-frame press with 17 T performance, suitable for continuous operation, featuring the following basic parameters: a) Travel speed: 10 mm/sec downward b) Opening speed: up to 25 mm/sec c) Initial pressing speed: 10 mm/sec d) Table size: 400x400 mm e) Ram size: 200x200 mm, with T-slots and central cylinder clamping f) Overall dimensions: approx. 1150x800x1750 mm g) Oil temperature gauge on the oil tank h) Adjustable pressure from 5 T to 17 T (adjustable via rotary knob) i) Two-speed manual lever operation j) Machine body powder-coated or double painted k) Control cabinet cable feed from above with 3000 mm cable and 16 amp plug l) Assembly, commissioning, and operator training available at separate cost Press Design: C-Frame Press Thermal Neutral Zone: 80 – 120°C Number of operator sides: 1 side Forces Pressing force max. (at 250 bar): 170 kN Max. release force: 10 kN Pressure buildup time (closed tool steel on steel): max. 2 sec Dimensions Max. opening width: 250 mm Stroke and min. opening: 100 mm Table height above floor: 850 mm Height above floor (total height): approx. 2200 mm Minimum hall height: 2,500 mm Parallel deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% loading: ≤ 0.3 mm/m Weight Total weight of press (without media): approx. 1 tonne Speeds Fast closing: 10 mm/sec Pressing speed: 10 – 0 mm/sec Sound Pressure Sound pressure level (measured at 1.5m height at the control panel per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press cylinders: 1 Operating pressure max.: 250 bar Pressure buildup time (pressing): 2 sec Pressure accuracy during press stroke: +/- 5 bar Main Pump Gear pump: approx. 6 L/min Oil volume: approx. HLP 46 MW 100 liters Ambient temperature max.: 40°C Oil temperature max.: 55°C Feed temperature: °C Electrics Main power supply: 400 V AC Control voltage (hydraulic pumps): 24 V DC Frequency: 50 Hz Hydraulic main motor connection: 2.2 kW Total connected load: approx. 3 kW Design The press is designed as an oil-hydraulic C-frame press. The hydraulics and tank are positioned above or on the press. Hydraulic unit The hydraulic system is mounted on top of the press. Safety Equipment The press complies with current safety regulations (UVV) and all applicable EU standards and directives for the described scope of delivery, in their latest versions. Electrics / Controls The control cabinet with control, power, and safety components is mounted on the right side of the press. The press is operated via a manual lever control. Control Cabinet Features Protection class: IP 54 Spare space: approx. 20% Cooling: none Internal lighting: none Operating mode selector switch, lockable: yes

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 068-071/270, gerklės gylis: 150 mm, stalo plotis: 280 mm, stalo ilgis: 280 mm, atstumo lentelė iki stūmoklio: 355 mm, eigos ilgis: 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Hodpfx Ajwvh R Aebmofr Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat depth: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz

Sąlyga: naudotas, Gamybos metai: 1991, mašinos/transporto priemonės numeris: 041-024/39, Press force: 63 t Throat depth: 360 mm Stroke: 500 mm Installation height: 800 mm Table clamping surface (approx.): 750 x 560 mm Ram clamping surface (approx.): 630 x 400 mm Working speed: 60 mm/s Return speed: 380 mm/s Total connected load: 12.6 kW Dimensions (LxWxH): 1,200 x 1,950 x 2,800 mm Hedpfsvai R Tsx Abmsfr Machine weight (approx.): 4.3 t

Sąlyga: paruoštas naudoti (naudotas), C tipo presas, hidraulinė presas, PYE 3 t presas, naudotas įrenginys Gamintojas: VEB Wema Modelis: PYTE 3.15 Hodpfsw Hc H Hex Abmofr Bendri matmenys: 500 x 730 x 1170 mm Spaudimo jėga: 3,15 tonos Eigos ilgis: 280 mm Stalo dydis: 280 x 280 mm Elektros duomenys: 380 V; 1,5 kW; 4 A

Gamybos metai: 1979, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 3534, Pressing force: 630 kN Return force: 100 kN Maximum ram stroke: 200 mm Installation height: 400 mm Throat depth approx.: 350 mm Table size: 610 x 800 mm Through hole in table: 100 mm Ram bore: 40 mm Ram advance speed: 350 mm/s Ram pressing speed: 18 mm/s Ram return speed: 380 mm/s Hydraulic drive: 380 V, 15 kW Space required: 1800 x 920 x 2440 mm Hfjdpob Hk Dzjfx Abmjr Weight: 3.94 t

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Hidraulinė presas VEB Zeulenroda PYE10N Hsdpfx Absw S Uccemjfr Naudota būklė, kaip parodyta nuotraukose Visus duomenis rasite nuotraukoje su identifikacine lentele.

Gamybos metai: 1993, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: Seriennummer: 9302394, CNC control HATASTAR 2000 The pressing force is 500 t or 5000 kN Tooling available alongside the machine Hfjdpfx Abjd Egc Aomsr Control cabinet on the left X1 + R / X2 + R axis with linear guide Y1 + Y2 axis Hydraulic upper tool clamping Pneumatic sheet following device + front stops on linear guide Second two-hand operation Universal die 100x100x5'100 mm Gooseneck blade 280 x 5'100 mm Die centering plate, b = 111 mm

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0195 - Rev.00, Pressure: 40 t Passage width: 850 mm Stroke: 500 mm Approx. machine weight (without operating materials): approx. 3.8 t Dimensions (L x W x H): approx. 1300 x 1800 x 3200 mm Retraction force: 4 t Ram plate: 600 x 450 mm Table plate: 750 x 720 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Max. working height: 700 mm Motor power: 12.7 kW Maximum feed speed: 140 mm/sec Pressing speed: 15 mm/sec Hfjdpfx Aefhcc Hobmer Return speed: 140 mm/sec Oil tank capacity: 160 l Monitor: WEG - 10 inch Control system: Siemens S7 1200

Sąlyga: naudotas, Gamybos metai: 1982, Technical details: Hfedordlgispfx Abmer Pressure: 2.5 t

Sąlyga: paruoštas naudoti (naudotas), Hidraulinis presas, ritės vyniojimo presas, naudota įranga Matmenys: 1340 x 1240 x 2740 mm Svoris: 640 kg Elektrinės specifikacijos: 400V Hidraulinis slėgis: 100 bar Darbinio stūmoklio eiga: 180 mm Hfedpfx Aou Hkfpobmjr

Sąlyga: naudotas, Gamybos metai: 1992, Pressure: 75 t Throat depth: 280 mm Stroke: 303 mm Total power requirement: 15 kW Machine weight: approx. 7,000 kg Space requirement: approx. m Hydraulic single-column press, Type HZS 75 Year of manufacture: 1992 Serial no.: H 92-2249 Upper ram pressing force: 75 t Table size: 750 x 515 mm Table height above ground: 820 mm Through hole in table: 300 x 200 mm Max. installation height: 500 mm Throat depth: 280 mm Upper ram stroke approx.: 303 mm Ram area: 500 x 400 mm Ram bore: 50 mm Total drive approx.: 15 kW - 380 V - 50 Hz Weight approx.: 7,000 kg Total machine height: 3,850 mm Accessories / Special equipment: Hodpfxjt Hwrze Abmjfr - DUNKES program control, type PC 10, with data input panel for pressure setting, pressure/time switchover, up/down stroke, rapid traverse and working speeds, as well as digital display of pressing force, ram travel, pressing time, program number. Storage for up to 30 tool programs, SIEMENS S5 PLC, teach-in button. - Press ram guided via adjustable prism strips. - Hydraulic shock absorber for blanking mounted in the press cylinder, 15 mm. - Motorised depth stop and blanking shock absorber adjustment. - Double sheet detection = maximum pressing force only reached after the preset travel distance. - Hydraulic tool clamps (4) on table, hydraulic pin clamping in ram, hydraulic ejector in ram, 3 t/15 mm. - Two-hand safety release, electric and infinitely variable return stroke limitation. - Overrun monitoring devices NKS, ram switchover of the upper cylinder. - Mounted control cabinet, connection to oil cooler, etc.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0151 - Rev.00, Pressure: 110 t Passage width: 800 mm Stroke: 500 mm Machine weight approx. (excluding operating fluids): 5 t Dimensions L x W x H: approx. 1950 x 1510 x 3145 mm Retracting force: 11 t Motor power: 20 kW Cylinder diameter: 200 mm Max. working height: 700 mm Advance speed max.: 195 mm/sec Pressing speed: 1 - 15 mm/sec Return speed: 5 - 140 mm/sec Travel distance: 500 mm Ram plate: 800 x 600 mm Ram plate thickness: 6 inches Table plate: 800 x 700 mm Table height above floor approx.: 900 mm Oil tank: 400 l Hfjdpfxodxrqws Abmsr Program memory: 200 programs Siemens monitor: 10 inch Siemens control system: S7 1200 Light curtains by Schmersal: 700 mm Proportional valve for speed control from 5 to 195 mm/sec in advance, 1 to 15 mm/sec during pressing phase, and 5 mm/sec to 140 mm/sec in return stroke HMI pressure control for hydraulic cylinder capacity from 20 to 110 tonnes Siemens remote access for maintenance purposes Motor complies with IE3 energy efficiency according to CE standards

Sąlyga: naudotas, Gamybos metai: 1996, Technical Details: Pressing Force: 6.3 t Throat Depth: 170/180 mm Stroke: 310 mm Hfsdpfx Abstxdmwomsr Drive Power: 3 kW Installation Height: 775 mm Machine Weight approx.: 1.5 t Clamping Table: 470 x 330 mm Table Height above Floor: 800 mm C-frame type 1 station

Sąlyga: naudotas, Gamybos metai: 1990, Pressure 25 t Reach 250 mm Stroke 100 mm Total power requirement 7.5 kW Machine weight approx. 3,200 kg Space requirement approx. 1,000 x 1,700 x 2,600 mm DUNKES CNC Controlled Hydraulic C-Frame Press Model HZS 25 Year of manufacture: 1990 Serial no. H 90-2018 ----- Ram pressing force: 25 t Table size: 620 x 460 mm Table height above floor: 820 mm Through-hole in table: 100 mm Max. installation height: 350 mm Throat depth: 250 mm Ram stroke approx.: 100 mm Ram surface: 500 x 350 mm Ram bore: 32 mm Working speeds: rapid advance/return 400/400 mm/s at partial load / at full load: 50 / 18 mm/s Main drive approx.: 7.5 kW - 380 V – 50 Hz Weight approx.: 3,200 kg Overall machine dimensions: 1,000 x 1,700 x 2,600 mm Accessories / Special features: • DUNKES program controller type CNC 100 with data input panel for pressure setting, pressure/time switching, upper/lower stroke, rapid traverse and working speeds, as well as digital display of pressing force, ram travel, pressing time, program number. Storage for up to x tool programs, SIEMENS S 5 PLC, teach-in button • Hydraulic shock absorption mounted in the press cylinder • SICK light curtain and two-hand safety control • Intermediate tables mounted, attached control cabinet • Overrun time 85 ms / overrun distance 30 mm, safety distance 170 mm Condition: good to very good – can be demonstrated under power Hfjdpfxet Hw Eze Abmsr Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. We always have a selection of hydraulic presses in stock, please contact us for further information.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0150,

Sąlyga: naudotas, Gamybos metai: 1971, Pressure 200 t Passage width NA mm Stroke 180 mm Table length 690 mm Table width 530 mm Distance between uprights 420 mm Total power requirement 18 kW Machine weight approx. t Space requirement approx. m E X N E R Hydraulic Four-Column Press for embossing, countersinking, extrusion, calibrating and stamping (medals) Model: H4SP 200 # 1101-20 Year of manufacture: 1971, but has since been overhauled several times _____ Downward pressing force approx. 200 t Return force upwards approx. 20 t Usable table size 420 x 220 mm Total table size 700 x 530 mm Distance between columns at the front 420 mm Sideways 220 mm Installation height table to ram (top) 380 mm Ram stroke approx. 200 mm Piston / Column diameter 270/120 mm Piston bore 50 mm Ram closing speed: – Rapid traverse/Load travel/Ram down 330/10/180 mm/sec Total power requirement approx. 15 kW - 380 V - 50 Hz Weight approx. 3,000 kg Machine dimensions approx. 1.4 x 1.3 x approx. 2.75 m Hfjdpfot Hw Dwox Abmjr Accessories / Special equipment "Hydraulic ejector in the table with separate pressure regulation "Electric selector switch for continuous stroke / foot release / manual engagement / setup "Large pressure gauge and control lamps for reached pressure/reached depth "The press stroke or rapid advance is set via a shift linkage with limit switches left and right of the press piston. "Pressure is adjusted via a finely adjustable pressure valve "The switch-over from pressing to return stroke is controlled by a pressure switch or a cam on the limit switch. "Control cabinet and hydraulic oil system are compactly mounted on the machine and easily accessible. Automation was previously mounted on the machine; only various pneumatic lines and valves remain.