Frezavimo staklės – universalios, konvencinės, su daugiau nei 1000 mm X eiga pirkti naudotą (46)

Sąlyga: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Cjdpfx Adjrqwbiemerk Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm

Sąlyga: geras (naudotas), Gamybos metai: 1983, FGSH 50 TOS KURIM Milling Machine Year of manufacture: 1983 (Czech Republic). Double-swivel head (new bearings, new gears installed). Beam aligned with optical sight. Specifications: Table size: 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Spindle speed range: 45–1400 rpm. Main motor power: 15 kW. Cededqp Euepfx Admork Power requirement: 23 kW. Dimensions: Length x Width x Height: 3200 x 2475 x 2620 mm. Weight: 6500 kg.

Sąlyga: naudotas, A well-maintained used universal drilling and milling machine by Bohner und Koehle, equipped with: - 3-axis HEIDENHAIN digital readout - Swiveling head 90° right/left - Large rotary table 800 x 1200 mm - Central lubrication - Documentation Table size: 800 x 1200 mm Table load capacity: 1,000 kg Longitudinal travel (X-axis): 1,000 mm Cross travel (Y-axis): 800 mm Vertical travel (Z-axis): 800 mm Rotary table rotation: 360° Infinitely variable table feed, longitudinal and cross: 26 – 1,100 mm/min Rapid traverse, longitudinal and cross: 1,600 mm/min Infinitely variable vertical feed: 7 – 350 mm/min Rapid vertical traverse: 500 mm/min Credepai Dhspfx Admek Main drive: Milling spindle drive: 2.5 / 3 kW Spindle taper: SK40 12 spindle speeds: 45 – 2,800 rpm Machine dimensions and weight: Width: 220 cm Depth: 220 cm Height: 250 cm Machine weight: 3,300 kg Technical specifications and dimensions are subject to change/errors.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1991, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 550 mm, veleno greitis (maks.): 2 066 aps./min, bendras svoris: 4 000 kg, Heidenhain 3-axis DRO feed drives automatic lubrication external electrical cabinet table 2000x460mm Crjdswqcv Nopfx Admek travels 1500x700x550mm weight 4000kg

Gamybos metai: 1998, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 23 800 029, Table clamping surface: 500 x 1600 mm Table travel X: 1220 mm Table travel Y: 500 mm Table travel Z: 500 mm Spindle taper: SK 50 Spindle speeds: 56 - 2800 rpm Feeds longitudinal and cross: approx. 10 - 1800 mm/min Feeds vertical: 2.5 - 450 mm/min Cedpfx Adj Ici Uomerk Electrical connection: 400 V, 16 kVA Space requirement: 2000 x 2250 x 2150 mm Weight: 4500 kg

Sąlyga: geras (naudotas), Gamybos metai: 1987, Immediately available ex location, CNC control: Heidenhain TNC 155 Travel X-axis: 600 mm Travel Y-axis: 200 mm Travel Z-axis: 150 mm Max. workpiece weight: 300 kg Clamping surface of the table: 800 x 300 mm Table height: 800 mm Spindle speeds infinitely variable: 40-2000 rpm Csdpfx Adjwazwkemsrk Drive power: 4 kW Infinitely variable feeds in all directions Dimensions (L x W x H): 2200 x 2700 x 2400 mm Weight approx.: 2000 kg

Sąlyga: naudotas, Gamybos metai: 1986, Universal milling machine Make: IMATEC Model: FU-145 Year of manufacture: approx. 1986 Technical Specifications Manufacturer: IMATEC Model: FU-145 Year of manufacture: approx. 1986 Control system: conventional Travel X/Y/Z: 1000 / 300 / 500 mm Spindle speeds vertical: 38 - 1440 rpm Spindle speeds horizontal: 35 - 1500 rpm Crodpfx Aewhm R Sedmek Spindle taper: ISO 50 Milling motor: 5.5 kW Connected load: 7.0 kW Machine dimensions (L x W x H): approx. 2.0 x 2.10 x 2.2 m Weight: approx. 3.1 t Equipment • 3-axis DRO ELESTA • Table size 1620 x 320 mm All information subject to change. Demonstration under power is possible at any time in our showroom.

Gamybos metai: 1983, Sąlyga: geras (naudotas), FGSV 32 TOS KURIM milling machine. Year of manufacture: 1983 (Czech Republic). Specifications: Codpfsh Ir Rmex Admork Table: 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Spindle speed range: 35-1800 rpm. Distance between spindle and table: 140 - 590 mm. Distance between spindle and column: 120 - 520 mm. Max. table load: 500 kg. Main motor power: 11 kW. Power requirement: 15 kW. Dimensions (L x W x H): 2735 x 2425 x 2475 mm. Weight: 4200 kg.

Sąlyga: naudotas, Gamybos metai: 1999, Funkcionalumas: nepatikrintas, X ašies eiga: 1 400 mm, Y ašies eiga: 630 mm, veleno greitis (maks.): 2 800 aps./min, labai tvirtas įrenginys – stalviršio apkrova iki 1200 kg Stalo dydis 1800 x 630 mm Crodpew Nvyqsfx Admok Sūkių diapazonas 56–2800 1/min, įrankio tvirtinimas ISO 50 Judėjimo keliai X / Y / Z 1400 / 630 / 500 mm Pašaros diapazonas X, Y 10–2000 mm/min (Z 2,5–500 mm/min), bepakopis reguliavimas Pagrindinis variklis 15 kW, prijungimo galia apie 20 kW įskaičiuota: universali frezavimo galva IUG 32A, pasukama 360° horizontali frezavimo špindelis greitasis važiavimas, ciklų automatas skaitmeninis indikatorius Heidenhain ND 750 aušinimo skysčio įranga apsauginiai darbo zonos gaubtai hidraulinis įrankio tvirtinimas CE atitikties deklaracija

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Universal milling machine WAGNER FCU-1100 is a milling machine distinguished by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metal worktable with T-slots for securing workpieces, and various visible mechanical components. Table dimensions: 460x1440mm Crjdpfx Aderidyrsmek Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: - HURON type head - Lighting - Lubrication pump - Feeds on 3 axes - 3-axis digital readout - Machine vice - Anti-vibration damper

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Aktiv Crsdpfxetdnb Es Admsk Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. The electrical and electronic components are excluded from the warranty, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, travel expenses are to be borne by the customer. Geometric inspection with test protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with M 16 drawbar thread - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The technical condition of the machine corresponds to the standard of the year of manufacture.

Sąlyga: geras (naudotas), Gamybos metai: 1980, Table size 1300 x 355 mm Tool holder, vertical + horizontal ISO 50 Credpfxsvu Dv Te Admsk Travel ranges X-axis 1000 mm Y-axis 350 mm Z-axis 450 mm Swiveling vertical milling head (R + L) Quill stroke 100 mm Speed range 22.4 – 1400 rpm Feed range 6.3 – 630 mm/min Rapid traverse 2.5 m/min Drive power approx. 5 kW Required space (L x W x H) 1900 x 1800 x 2100 mm Weight 3200 kg Accessories / Special features: • 3-axis digital readout (manufacturer: FAGOR) • Swiveling vertical milling head (R-L) with 100 mm quill adjustment • Vertical and horizontal milling spindle ISO 50 • Milling spindle vertical + horizontal • Large clamping table 1350 x 350 mm • Feed and rapid traverse on all axes • Wide, stable guideways • Central lubrication • Swiveling control panel • Coolant system • Emergency stop switch Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Sąlyga: Defektas atsarginių dalių laikiklis (naudotas), Make: Stanko Year of manufacture: 1972 Machine No.: 2334 Type / Model: 6R82G Travel x-y-z: approx. 1,200 – 250 – 300 mm Table size: 1,250 x 320 mm Spindle speed range: 31.5 to 1,600 rpm Spindle taper horizontal: SK 50 vertical: MT4 Feeds: 0.25 to 12.5 mm/min Codpfxjw D Race Admjrk Power connection: 7 kW Accessories/Equipment: Vertical head Condition: Feed mechanism defective Weight: 2.7 t Dimensions: 1,500 x 2,000 x 2,200 mm

Sąlyga: naujas, Gamybos metai: 2025, x-travel 1050 mm y-travel 480 mm z-travel 550 mm Table size 1524x380 mm Codpfx Adowp Tn Homerk Taper SK 40 Quill stroke 127 mm Quill diameter 105 mm - New machine - - Z-axis travel 550 mm - Table size 1524x380 mm - with steplessly adjustable spindle speeds, FAGOR INNOVA 30i digital display, pneumatic tool clamping, swivelling drill head and cassette cover for cross travel * For more information on the exact standard configuration and available options, please visit our website or contact us directly *

Sąlyga: naudotas, Gamybos metai: 2006, x-travel: 560 mm y-travel: 300 mm z-travel: 420 mm Digital readout: 3 axes, HEIDENHAIN Table size: 1100 x 250 mm Spindle speeds: rpm Spindle taper: ISO Feed rates: 18 - 384 mm/min Milling motor: 3.7 kW Csdpeiclm Asfx Admjrk Operating voltage: 0 V Total power requirement: 5.5 kW Machine weight approx. 1.1 t Space requirement approx. 1.45 x 1.70 x 1.90 m - Factory no.: 676 - Axis digital display HEIDENHAIN - Rapid traverse - Central lubrication - Coolant system - Machine lamp

Sąlyga: geras (naudotas), Gamybos metai: 2013, X ašies eiga: 1 000 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 530 mm, veleno greitis (maks.): 8 000 aps./min, stalo plotis: 406 mm, stalo ilgis: 1 372 mm, sukimosi greitis (maks.): 8 000 aps./min, bendras svoris: 3 100 kg, reikalingas plotis: 2 280 mm, vietos reikalavimas ilgis: 2 900 mm, reikalingas aukštis: 2 550 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 530 mm Table dimensions: 406 x 1,372 mm Spindle taper: BT 40 Spindle speeds: 1 - 8,000 rpm Control: Fagor Equipped with: - Coolant system - Operating manual Country of origin: Taiwan Motor power: 10 HP Machine dimensions (LxWxH): 2,900 x 2,280 x 2,550 mm Credpfx Adsvpl I Temsk Machine weight: 3,100 kg

Sąlyga: naudotas, Gamybos metai: 1976, without feed unit used, good condition Make: Martin Codpevwfiaofx Admerk Model: T24 Year of manufacture: 1976 Machine no.: 91716 Motor: 7.5 kW / 10 HP reinforced Motor with 1 speed 4 speed settings: 3000/4500/6000/9000 rpm mechanical brake spindle diameter: 30/40 mm x 200 mm max. tool diameter with fence: 250 mm table size: 1000 mm x 900 mm table extension approx. 2400 mm extendable frame support height adjustment pneumatic Space requirement approx. 2400 mm x 1000 mm x 1400 mm weight approx. 800 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Handover as inspected, in current condition, without any warranty or guarantee

Gamybos metai: 2003, Sąlyga: naudotas, 1 used, very well-maintained universal milling machine with 3-axis FAGOR digital readout, stepless feed, and powered upper slide drive Manufacturer: ARSENAL, Bulgaria Model: FUV 321 M Crodpfjbpmurex Admek Year of manufacture: 2003 Technical Data: Spindles: Spindle taper vertical + horizontal: ISO 50 Speed range, vertical, infinitely variable: 30 – 2000 rpm Speed range, horizontal, infinitely variable: 30 – 2000 rpm Table: Clamping surface: 1350 x 320 mm X-axis, manual / automatic: 1100 / 1080 mm Y-axis, manual / automatic: 360 / 340 mm Z-axis, manual / automatic: 460 / 440 mm Overarm adjustment approx. 600 mm Table swivels ± 45° Max. distance from table surface to horizontal spindle center: 490 mm Max. distance from table surface to vertical spindle nose: 630 mm Table travel: Feeds longitudinal & cross, continuously variable: 12.5 – 630 mm/min ditto vertical, continuously variable: 5 – 262 mm/min Rapid traverse longitudinal & cross: 2.5 m/min rapid traverse vertical: 1.04 m/min Drive: Drive power: 7.5 kW Dimensions & Weight: Dimensions (L x W x H): 2000 x 2500 x 2050 mm Weight: 3200 kg Equipment / Special Features: • 3-axis digital readout, manufacturer FAGOR, model NV 300 M • Universal milling head “HURON” system, manually adjustable in 2 planes • Stepless feed via joystick and potentiometer in all 3 axes • Stepless speed for vertical + horizontal via potentiometer with 2 servo drives, brand TELEMECANIQUE, model Altivar 28 • Stepless feed and stepless speed, each with digital display • Overarm with motorized drive for the universal milling head • Increased speed range up to 2000 rpm • Automatic machining cycle for the X-axis • Horizontal milling device with 2 counter-support brackets • Coolant system • Central lubrication system • Chip tray • Machine feet • Machine lamp • Operating manual • CE compliant electrical equipment • CE compliant Original price: €65,800 net The machine can be inspected and demonstrated under power at our warehouse at any time by appointment. Siegfried Volz Werkzeugmaschinen Ruüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Sąlyga: geras (naudotas), Gamybos metai: 2003, veikimo valandos: 14 807 h, bendras svoris: 3 545 kg, įėjimo įtampa: 400 V, paskutinio kapitalinio remonto metai: 2015, Operating hours as of approx. 02/2025: CNC control on: 14,807 h, machine on: 76,429 h, program run: 39,412 h 3D path control Universal milling head with controlled B-axis, SK 40 Rack magazine with 60 magazine slots, SK 40 Infrared probe, Heidenhain TS 641 NFS server Chip conveyor, manufacturer Blechtechnik GmbH Cooling with extended media line, manufacturer Bürener Maschinenfabrik GmbH Csdsv Ab Rkepfx Admerk The blue computer terminal shown in the picture in front of the machine is not part of the machine The machine is still in operation and can be inspected during our business hours. SK40 tool holders can be purchased; cutting tools are not included in the sale. Sale ex works, without warranty and without return. Dismantling and transport must be organized by the buyer.

Sąlyga: naujas, Gamybos metai: 2023, x-travel 1200 mm y-travel 580 mm z-travel 550 mm Table size 1575x425 mm Spindle taper SK 40 Quill stroke 152 mm Quill diameter 110 mm Cedpfxswp Td Ij Admerk - New machine - - Z-axis travel 550 mm - Table size 1575x425 mm - with infinitely variable spindle speeds, FAGOR INNOVA 30i digital readout and pneumatic tool clamping * For more information about the exact standard equipment and available options, visit us online or contact us directly *

Sąlyga: naudotas, Gamybos metai: 1967, X travel: 1100 mm Y travel: 700 mm Z travel: 500 mm Spindle-to-table distance: 9–509 mm Spindle head swivel range: 360° Spindle taper: SK 40 Spindle speeds: 30–2066 rpm Number of speed steps: 27 Feed rate: 1.6–820 mm/min Number of feed steps: 27 Clamping surface: 1435 x 460 mm Rapid traverse X and Y axes: 2.8 m/min Rapid traverse Z axis: 1.4 m/min Total power requirement: 10 HP Machine weight approx.: 3.1 t Space requirement approx.: 2.36 x 1.65 x 1.45 m (W x H x D) Universal tool milling machine with three-dimensionally adjustable original Huron universal milling head; head can also be set for horizontal milling; handwheels and feeds for X, Y and Z working area; main safety switch; adjustable work light; coolant system; Heidenhain digital readout. Cedpfx Ascxxyzodmork