Džiovintuvas pirkti naudotą (82)

Sąlyga: labai geros būklės (naudotas), CTS 3G C 400* – Hot Water Boiler for Superheated Water, Manually Fed with Wood Waste Gusdpfx Acjw Ev Twoush Thermal capacity: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Fitted with control thermostat, safety thermostat, and thermometer. Fuel type: wood waste. Exhaust system: cyclone separator, forced draft fan, connection ductwork. Steaming Chamber Net Capacity: 100 m³/batch. Type DVK-I 100 m³ – 1 pc, dimensions: 8.5 x 9 m, height 4.3 m. Control unit: Baschild Italy. Sliding door. Oxyvent overpressure system. Stainless steel tanks and radiators on three sides. Includes turnkey connections between boiler and steamer, and complete boiler room equipped with distributor, manifold, pumps, expansion tank, etc.

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Vanicek drying chamber with bolster wagon with entrance and exit gate (double-leaf doors) with control unit and electrical switch cabinet Gjdpfx Acowxdqkoueuh Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan: VMR 71-05-4, electric motor 1.1 kW/400V Dehumidifier Ø 50 mm, with actuator Dehumidifier Ø 40 mm, with actuator UGL sensors, humidification, heating valve (local supply) Switchgear, heating coil, fan frame Stacking dimensions: 1x12.50 m, 2x1.20 m, 2x1.00 m

Gamybos metai: 2007, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Paint Drying Chamber MEYER AB / Fanmet OY 17m³ Year of manufacture: 2007 (installed in 2009) Manufacturer: MEYER OY Finland Previously used for drying painted furniture components. Loading via rack trolleys Dimensions: Length: 3,600 mm Width: 2,150 mm Height: 2,200 mm Approx. 17 m³ capacity Electric heating Total power: 30 kW 18 heating elements, each 1,667 W, 400 V (length: 2,360 mm) Airflow: 3 m³/sec or 10,000 m³/h Internal cladding: galvanized steel sheet Gjdott Sy Repfx Acusuh 2 VEM fan motors (3.6 kW + 0.37 kW), ATEX certified Thermostat: 0–120°C Overheating protection: 0–210°C ATEX compliant according to 94/9/EC CE marked

Gamybos metai: 2018, veikimo valandos: 600 h, Sąlyga: beveik kaip naujas (naudotas), Trocknungsband Kapazität: 1 t/h Baujahr: 2018 Betriebsstunden: 600 Anlage besteht aus: - Bunkerbeschicker - Trocknungsstrecke mit perforierter Matte, Maße 10x2 m - Heißwasser-Wärmetauscher - Max. Austrittstemperatur: 46°C - Max. Trocknungslufttemperatur: 70°C - Wassertemperatur am Wärmetauscher: 90°C - Thermische Leistung: 450 kW - Ansaugventilator - Staubabscheidezyklon Gujdev Ny E Tspfx Acueh - Elektrischer Schaltschrank mit SPS-Steuerung

Gamybos metai: 2013, Sąlyga: naudotas, Drying chamber with intermediate ceiling ventilation and front-end loading by trolley for production and conditioning of 3 mm oak lamellae, with initial moisture 12 to max. 15% / final moisture 7% Used, in good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40°C above 30% RH Year of manufacture: 2013 Rated power: 7 kW / 15A Frequency: 50 Hz Control voltage: 24VDC / 230VAC Protection class: IP54 Capacity: The chamber holds: - 2 packs widthwise at 1.10 m each – with 0.20 m spacing between - 1 pack in height at 1.80 m – with 0.10 m thick base timbers and 0.10 m free space - 2 packs in length at 2.20 m each – plus 0.60 m free space The chamber contains 4 stack packs and has a gross total volume of 17.4 m² The net capacity is 4 m³ of wood – based on a wood thickness of 3 mm and stacking batten thickness of 10 mm, as well as 90% width utilization for trimmed wood. Godpfx Acsvwfhijueuh Usable dimensions per chamber: width 2.40 m x height 2.30 m x length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheeting - Snow load 100 kg/m² - Double-leaf swing gate - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heater register, 50 kW, flow temperature 80°C, return temperature 73°C - Servo-controlled supply and exhaust air dampers - Cold water spraying system - Chambers run fully automatically - Computer control system K5 Dismantling: at customer’s site Handover in as-seen/where-is condition without warranty or guarantee

Gamybos metai: 2008, Sąlyga: geras (naudotas), For sale: Scolari sawdust dryer with automatic control – currently in operation. Gujdpfx Aov Eu R Aecujh The dryer uses fresh air mixed with flue gas, with a maximum drying temperature of 130–140 °C. Heat demand is 2,000,000 Kcal/hour, and the capacity is 2 tons/hour (dry sawdust). Heating is provided by an automatically controlled chip-fired boiler. Extras: • Automatic moisture meters on the infeed and outfeed sides • Draft volume in the drying chamber regulated by a frequency converter The equipment can be inspected during operation by prior arrangement. Detailed documentation available upon request.

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Drying chamber Gujdpfxowr Tzfo Acush Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency converter With control system Heating capacity: 223 kW Water temperature: 85°C Water flow rate: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control unit: MB Intellevent 5000 program

Sąlyga: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Gjdov Si Szjpfx Acueuh Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Gamybos metai: 2013, Sąlyga: naudotas, Drying chamber / Recirculating air drying chamber / Wood drying kiln / Drying system Mühlböck VLSM2120 Guedpfxewpfwyo Acujh External dimensions: Length: 7.1 meters Width: 4.4 meters Height: 5 meters Internal dimensions: Length: 6.4 meters Width: 3 meters Height: 4.2 meters Technical specifications: Year of manufacture: 2013 Heating capacity: 102 kW Flow temperature: 90°C Water flow: 6 m³/h Electrical connection load: 4 kW Fans: 3 x 1.1 kW Optional with wood chip heating system

Sąlyga: labai geros būklės (naudotas), Surface treatment technology (UV radiation system) Working width (min/max): mm 1300 Machine length: mm 2900 (approx.) Workpiece thickness (working height): mm 0 - 80 (approx.) Feed speed (adjustable): m/min 0 - 40 (approx.) Gujdpfx Acjgz Svnsujh PLC control panel (touch screen) With integrated control cabinet and operator panel Total connected load: kW 36.9 Machine equipped with: No. 2 UV lamps Motorized conveyor system by side chains Exhaust gas fan Air vacuum blower

Gamybos metai: 1997, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Internal dimensions: Width: 2.50 m Height: 3.60 m Gjdpfxswzlnio Acueuh Length: 16.00 m The chamber holds a net volume of 60 m³ of wood or 12 stacked bundles. Drying chamber in aluminium cassette construction with load-bearing aluminium frame, 100 mm resin-bonded, dimensionally stable rock wool insulation and ventilated aluminium trapezoidal sheeting. Snow load: 100 kg/m² Electric folding-lift gate, automatic opening. Side loading with forklift 10 fans, each 0.75 kW Hot water heat exchanger providing 320 kW at 75°C Cold water spraying system Chamber operates fully automatic with electric controls.

Gamybos metai: 2024, Sąlyga: naujas, For sale: Drying System - 1T 184 TPR Model (Mobile Belt Conveyor) We offer a high-quality drying system, ideal for drying wood sawdust, crops, recyclable waste, and food industry raw materials. Below are the design data and features of the drying system: Design Data: • Processed product: Sawdust • Physical form: Loose – > 1 mm Gjdpfx Acjua D U Isujuh • Initial moisture content: 55%, 50%, 40% • Final moisture content: 12% • Wet capacity: 4.00 t/h, 4.50 t/h, 5.65 t/h • Dry capacity: 2.05 t/h, 2.55 t/h, 3.85 t/h • Drying air temperature: 80 °C • Thermal power consumption: 1,800 - 2,350 kWh • Max. evaporated water per hour: 1,800 - 1,955 Kg/h Installed Electrical Power: • Feed hopper: 5.5 kW (x2) • Drying belt: 2.2 kW • Discharge device: 5.5 kW • Exhaust fans: 22.00 kW (x3) • Cleaning fans: 4 kW (x2) • Total installed power: Approx. 92.70 kW Water-Air Heat Exchanger: • Recommended thermal capacity: 2,600 kW • Water temperature: 90 °C in – 70 °C out Dimensions: • Dryer frame external dimensions: Approx. 22 m long, 6 m wide • Drying belt surface: 72 m² • Discharge device: 5,500 mm x Ø 300 mm • Feed hopper: Approx. 1.00 m³ • Number of exhaust fans: 3 • Number of water-air heat exchangers: 4 Technical Description: • Feeding system: Adjustable screw conveyor with level sensor. • Drying table: Modular design with inspection windows. • Drying belt: Polyester fabric conveyor with steel rollers. • Thermal insulation: 50 mm thick rock wool with Magnelis® cladding. • Mixing brush: Painted steel mixing brush. • Base frame: Folded steel sheets with reinforcing profiles. • Drying belt cleaning system: High-pressure air and water spray system. • Water spraying system: Closed-loop water spraying system. • Stairs and access: Safe access stairways and walkways. • Discharge device: Steel screw discharge with motor. • Heat exchangers: High-efficiency steel finned heat exchangers. • Air extractor fans: Centrifugal fans with vibration dampers. • Heat recovery: Warm air recirculation duct. • Machine enclosure: Prefabricated insulated sandwich panels. • Dust filters: Dust filters on air intake grille. • Painting process: Phosphating, passivation, polyester powder coating. • Electric control panel with PLC: SCHNEIDER electric and PLC components, HMI operator panel. • Moisture control system: PT 100 temperature sensors. • Remote service: Direct internet connection. • Inlet and outlet moisture sensors: 4-20 mA setting. For more information and a quotation, please contact us! We look forward to your inquiry! Price: €530,000

Gamybos metai: 2020, Sąlyga: naudotas,

Sąlyga: naujas, No. 3187 Vacuum Dryer / Drying Chamber ISVE ES 5 / NEW New machine, delivery time 120 days Design features: Stainless steel AISI-304, partially insulated External diameter: 1600 mm Length of cylindrical section: 5000 mm Total dryer length: 5900 mm Overall length with rails: 11000 mm Max. operating vacuum: -730 mm Hg Wood stack length: 5000 mm Wood stack width: 1100 mm Wood stack height: 990 mm Net wood volume: approx. 5 m³ Installed electrical power: 16.01 kW Average hourly energy consumption: 8 kWh Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1.25 kW) - 2 internal condensers (turbofan, each 0.55 kW 380 V AC with stainless steel tubes) - 1 check valve (one ¾'' for the vacuum circuit) - 1 solenoid valve for air recirculation (24 V AC; one 1'' for the autoclave) Gujdpfx Acsvc Axpsujh - 1 manual air recirculation valve (1'' ball valve) - 1 electrical control system (Siemens S7-1200 PLC with touch panel) - 1 ISVE Server Connect for remote servicing and control - 2 wireless moisture probes (dual probes for core and surface moisture measurement) - 1 wireless temperature probe (for measuring wood core temperature) - 2 plate holders - 1 operation manual (in English with CE certificate and circuit diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical specifications, year of manufacture, and scope of supply as per manufacturer; subject to change without notice Prior sale reserved For new machines, the manufacturer’s warranty terms apply Images and videos are for illustration purposes only and may not represent the actual scope of supply Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Sąlyga: geras (naudotas), Gamybos metai: 2000, Brunner Vacuum Dryer / Vacuum Drying Chamber Model: HIGH VAC-54/10,5 Circulating Temperature: 90°C (Steam treatment of wood/beech also possible) with gas heating with heating pipes with control system with PC External dimensions: Length: 11,480 mm Width: 5,590 mm Gujdpsrqf Utofx Acujh Height: 4,045 mm Gross usable dimensions per stacking wagon: Length: approx. 10,500 mm Width: approx. 1,200 mm Height: approx. 2,680 mm Good condition – fully functional – available immediately Location: Austria, near Ried im Innkreis

Sąlyga: labai geros būklės (naudotas), Surface Finishing Technology (UV Radiation System) Working width (min/max): mm 1300 Machine length: mm 4000 (approx.) Workpiece thickness (working height): mm 0 - 80 (approx.) Feed speed (adjustable): m/min 0 - 40 (approx.) PLC control panel (touch screen) With integrated control cabinet and operating panel Total connected load: kW 54.9 Machine equipped with: No. 3 UV lamps Motorized conveyor system with side chains Exhaust gas extraction fan Guedpfxogz Svgo Acush Air vacuum blower

Gamybos metai: 1989, Sąlyga: naudotas, Working chamber (L x W x H): 5300 x 750 x 630 mm Used, good condition Godpfxevwghwe Acuouh Manufacturer: Lauber Model: I S-6 C Year of manufacture: 1989 Internal chamber length: approx. 5300 mm Internal chamber width: approx. 750 mm Internal chamber height: approx. 630 mm Chamber volume: 2.4 m³ Side loading Incl. loading trolley Vertical lift door Control: manual, fully automatic Electronic control type C Longitudinal ventilation Fan: 1 unit, 0.55 kW Heating: electric, 4.2 kW Space requirement: approx. 6900 mm x 1260 mm x 1000 mm Location: 97447 Gerolzhofen, free loaded on truck, unpacked Delivery as inspected, in current condition Without warranty or guarantee

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 36 000 mm, Flat-bed press dryer, working width 4,600 mm, length 22,000 mm (of which 10,000 mm with press rollers), separate pressing and cooling section, heating medium: hot water, semi-automatic loading system, model BFT46 with lifting platform, max. veneer length: 4,600 mm, roller width: 600 mm, total length: 36,000 mm, 11 fans, PLC control system renewed in 2017. A second flat-bed press dryer of similar design is also available. Gujdpfxov Hygfo Acujh

Gamybos metai: 2015, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 37149, Pozicija 1: Lauber – Centralna jedinica za upotrebu energije, tip L-ENZ 650 Centralni modul za iskorištavanje i korištenje toplinske energije, primjerice iz bioplinskih postrojenja, kogeneracijskih postrojenja i drugih izvora tople vode. Idealan za sušenje biomase s visokim udjelom vode, poput grubo usitnjenog drva, cijepanih i uzdužno rezanih trupaca te druge krupne biljne mase (labavo materijal, propustan za zrak). Centar za iskorištavanje energije koncentrirano dovodi vrući zrak u ventilirani kontejner ili u odgovarajuće kućište na lokaciji. Riječ je o sofisticiranom sustavu bez skupih, na kvarove osjetljivih transportnih tehnologija. Pozicija 2: Fliegl – Sušara s pomičnim podom Okodry 20/12 Sušara s pomičnim podom za cjepanice i zrna kukuruza* Toplinska snaga max. cca 500 kW/h Dovod zraka putem prednjeg pojedinačnog kanala, dimenzije: cca 2.380 mm x 410 mm Perforirana podna ploča, otvori do maks. 3 mm Dodatna opcija: Gusdpfx Acov Hp E Rsuoh Pozicija 3: Filter stanica Naš model: FM286P Dimenzije: 2400 x 4900 x v 7500 mm (820 F.R.S.) Protok zraka: 30.000 m³/h

Sąlyga: naujas, No. 3183 Vacuum Dryer / Drying Chamber ISVE ES 3 / NEW New machine, delivery time 120 days Design features: Stainless steel AISI-304, partially insulated Outer diameter: 1300 mm Length of cylindrical section: 5000 mm Dryer length: 5900 mm Total dryer length with rails: 11,000 mm Maximum operating vacuum: -730 mm Hg Timber stack length: 5000 mm Timber stack width: 800 mm Timber stack height: 790 mm Net wood capacity: approx. 2.5 m3 Installed electrical power: 8.80 kW Average hourly power consumption: 4.4 kW/h Included: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0.695 kW) - 1 oil vacuum pump (65 m3/h / 1.8 kW / 380 V AC) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan, each 0.37 kW 380 V AC) - 2 check valves (one ¾" for the vacuum circuit, one ½" for the condenser drain) - 1 solenoid valve for air recirculation (24 V AC: one 1" for the autoclave and one ½" for the condenser) - 1 manual air recirculation valve (1" ball valve) - 1 electrical control (Siemens S7-1200 PLC type, with touch panel) - 1 ISVE Server Connect with remote maintenance and control Guedpfx Acju Tipkjush - 2 wireless moisture probes (dual probes for core and surface moisture measurement) - 1 wireless temperature probe (for measurement of timber core temperature) - 2 plate holders - 1 operating manual (in English, with CE certificate and circuit diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical specifications, year of manufacture and scope of delivery according to manufacturer, no guarantee Subject to prior sale For new machines, the manufacturer's warranty conditions apply Images and videos are for illustration purposes and do not represent the actual delivery contents Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Sąlyga: labai geros būklės (naudotas), large drum dryer, was used for drying wood chips. Godowc Dy Hepfx Acueuh

Gamybos metai: 2022, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Lauber wood dryer with longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m³ with wood temperature measuring point -> new / unused / original packaging -> immediately available (standard delivery time approx. 9 months) -> see detailed description in the photos Guodpfomidtrsx Acush -> collection, loading, etc. to be arranged by the buyer -> transport, customs clearance, and insurance to be arranged by the buyer

Sąlyga: paruoštas naudoti (naudotas), Technische Daten Tank: 1000 mm Tanklänge: 4600 mm Ablagenmaß: 700 x 4000 mm Höhe: 700 mm Max. geschlossene Länge: 4700 mm Elektroboiler Godpfxet Hzvws Acuouh Programmierbeispiel: Holzstärke: 45/60 mm Anfangsfeuchte: 35/45% Plattentemperatur: 45/60 °C Gesamtdauer: 90 Std. (Herstellerangaben ohne Gewähr) Leistung und Motoren Spannung: 400 V Anschluss: Drehstrom Gesamtmaße Länge: 4600 mm Breite: 1000 mm Höhe: 1100 mm Gewicht: 1500 kg

Sąlyga: naujas, No. 3171 Vacuum Dryer / Drying Chamber ISVE ES 2 / NEW New machine, delivery time: 120 days Godpjuvi Saefx Acuouh Design features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Total length of dryer with rails: 11000 mm Max operating vacuum: -730 mm Hg Timber stack length: 5000 mm Timber stack width: 800 mm Timber stack height: 400 mm Net wood volume: approx. 2 m³ Installed electrical power: 5.27 kW Average hourly power consumption: 2.7 kW/h Included: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0.695 kW) - 1 oil vacuum pump (40 m³/h / 1.1 kW / 380 V AC) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 check valves (one ¾" for the vacuum circuit, one ½" for the condenser drain) - 1 solenoid valve for air recirculation (24 V AC: one 1" for the autoclave and one ½" for the condenser) - 1 manual air recirculation (1" ball valve) - 1 electrical control (Siemens S7-1200 PLC with touch panel) - 1 ISVE Server Connect with remote maintenance and operation - 2 wireless moisture probes (dual probes for core and surface moisture measurement) - 1 wireless temperature probe (for measuring wood core temperature) - 2 plate holders - 1 operating manual (in English with CE certificate and wiring diagrams) Shipping dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical data, year of manufacture, and scope of supply as per manufacturer, subject to confirmation Prior sale reserved For new machines, the manufacturer's warranty regulations apply Images and videos are for reference only and do not represent the exact scope of supply Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex works

Sąlyga: paruoštas naudoti (naudotas), Technische Daten Gesamtvolumen: 1,6 m³ Länge: 4.800 mm Breite: 700 mm Gjdpet Hzvqofx Acujuh Beladehöhe: 500 mm Neue Membran Trocknungszyklus und Temperatur am Bedienfeld je nach Holzart und -stärke einstellbar Neue Heizwiderstände und Vakuumpumpe 6 Heizplatten Ideal für Tischlereien und die Schnell-Trocknung (unter 90 Stunden) kleiner Holzvolumen Leistung und Motoren Gesamtmaße