UV Sausintuvas

CEFLA UV-R M2

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg Hedpfx Abev I Akvjvenl - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: naudotas, Gamybos metai: 2011, Apdirbimo dydis X kryptimi: 2770 mm. Apdirbimo dydis Y kryptimi: 1220 mm. Apdirbimo storis (Z matmuo): 80 mm. Mašinos konstrukcija: portalo tipo staklės. Pagrindinio veleno galia: 11,0 kW. Pagrindinio veleno greitis: 1500–24000 aps./min. Vektoriškai valdomas velenas: taip. Tvirtinimo sistema: HSK 63 F. Veleno aušinimas: oro aušinimas. Ašių skaičius: 3. Įrankių keitiklis: taip, vnt. Įrankių keitimo vietų skaičius: 10 vnt. Rašomosios mašinėlės klaviatūra: taip. Pelė: taip. Programinė sistema: Xilog Plus. DXF sąsaja: taip. Galima prisijungti prie interneto: taip. CD-ROM įrenginys: taip. Stalo tipas: tinklelinis stalas. Atramų sistema: atraminiai cilindrai. Vakuuminių siurblių skaičius: 1. Vakuuminio siurblio galia: 250 m³/val. Apsauga: saugos kiliminiai takai. Hnodpfx Ajvvi Htsbvol Sandėlio vieta: Sonnefeld

Būklė: labai geros būklės (naudotas), CNC INFOTEC machining center Model: 2515 5 axes Year of manufacture: 2018 Working area dimensions for X/Y axis: X 2100 mm, Y 3100 mm Z-axis travel: 1250 mm Hjdpfx Aoun Rqgsbvsnl Machine travel speed X, Y, Z: X: 80 m/min, Y: 80 m/min, Z: 12 m/min Vacuum table BECKER pump HITECO spindle with HSK 63F interface

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), Connected load: 4 kW, Weight: 1 t. Hsdpfx Aohlp Efobvenl

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Dvigubos sraigtinės ekstruzijos mašina Werner & Pfleiderer / Coperion ZSK 83 Parduodamas ZSK 83 dvigubas sraigtinis ekstruzijos įrenginys (bendrojo darbo) iš Werner & Pfleiderer / Coperion. Mašina yra puikios techninės būklės, reguliariai prižiūrėta. Techniniai duomenys: - Modelis: ZSK 83 - Sraigtų sistema: bendrojo darbo dvigubi sraigtai - Variklio galia: 46 kW - Cilindrai: vandeniu aušinami - Dujų ištraukimo zona: yra Hnjdpfxex Dkmge Abvel - Dozavimas: įskaičiuotas (kaip nuotraukose) - Atsarginiai sraigto elementai: yra - Valdymo skydas / elektros spinta: geros būklės, pilnai veikianti Bendrai: Įrenginys puikiai tinka kompaundavimui, masterbatch, perdirbimui, polimerų ir užpildų apdirbimui. Ekstruderis buvo atnaujinamas pagal poreikį ir yra techniškai patikrintas. Apžiūra ir bandomasis paleidimas vietoje galimi pagal susitarimą. Galimas transportavimas visame pasaulyje. Dėl susidomėjimo maloniai prašome kreiptis – galima pateikti daugiau nuotraukų, techninių duomenų ar vaizdo įrašų.

Būklė: naudotas, Gamybos metai: 1973, This Heidelberg OHT, manufactured in 1973, is a robust and reliable die-cutting machine designed for high-volume production. The machine, bearing serial number T 184 103 H, is currently located in Germany. It processes sheets with a maximum format of 260 x 380 mm and a minimum format of 40 x 70 mm, with a maximum form size of 260 x 350 mm. The machine offers a punching force of 40 tons and an impressive capacity of 5,500 sheets per hour. Powered by a 380 V motor with 1.25 kW, it is equipped with two locking frames and weighs 1,100 kg. This makes it both powerful and stable for continuous operation. The machine is offered as inspected and is ready for inspection and integration into your production line. Format: 260 x 380 mm Equipment: Hot foil stamping platen: Original HEIDELBERG Maximum sheet size: 260 x 380 mm Minimum sheet size: 40 x 70 mm Maximum form size: 260 x 350 mm Punching force: 40 tons Hodpjwxm Rmofx Abvsnl Capacity: 5,500 sheets/h 380 V, 1.25 kW Net weight: 1,100 kg 2 locking frames

Būklė: geras (naudotas), Throughfeed line for door leaf processing, high-performance machine capable of processing a single door leaf (lock case, handle, and hinges) in approximately 30 seconds. Hnedpeuq Scpefx Abvsl The machine consists of two units, each equipped with left and right sections that perform specific operations. In the first unit, the left section mills the faceplate for the lock and drills for the handle and key, while the right section simultaneously drills for hinges. In the second unit, the left section creates and deepens the lock case pocket, while the right section simultaneously screws in the hinges.

Būklė: naujas, Gamybos metai: 2026, Completamente automatisk skjæring av mellomstore til store aluminiumprofiler med brukervennlig automasjon. Legg ned hvilken som helst aluminiumprofil — maskinen vil automatisk oppdage og skjære den i henhold til jobblistene med høy-presisjon servomotor for nøyaktig materialposisjonering. Excel-jobblister kan importeres via WIFI for effektiv og enkel håndtering av store skjærelister. For hver aluminiumprofil du legger ned for skjæring, uansett lengde, måler en lasersensor profilens lengde. En kraftig optimaliseringsalgoritme kalkulerer i sanntid den beste skjærerekkefølgen for å minimere svinn. Maskinen skjærer automatisk henhold til den optimerte listen uten stopp. Du trenger ikke gjøre noen innstillinger – bare fortsett å legge inn nye aluminiumstokker. Et raskt og enkelt alternativ til dobbelthodede gjærsager. Tast inn (eller importer) ønskede lengder og vinkler, og trykk START. Maskinen produserer kontinuerlig vinkelskårne deler, raskt og nøyaktig. Hnjdpfx Absf Ekn Dsvsl • Fullautomatisk skjæredrift med stangmating og tilpassing av lengde • Enkelt brukergrensesnitt for automatisk drift – legg inn jobb og start skjæring på sekunder • Forenklet del-, batch- eller store Excel-jobblister for skjæring • Bundlet/flerstang-skjæring og telling • Fjerninnlasting av Excel-jobblister via WIFI med avansert datamapping • Fullt justerbar kutte- og fremføringshastighet for maksimal produktivitet • Automatisk optimaliseringsmodus med laserbasert lengdemåling og kuttoptimalisering for minimalt svinn (opsjon) • Automatisk etikettutskrift for deler med data fra jobbliste (manuell påføring, opsjon) • Direkte materialmerking inline uten operatørinngrep (opsjon) • Strekkode- eller QR-kodeutskrift/skanning for jobbinntasting (opsjon) • Automatisk servo-posisjonering av sagvinkel opp til ±75° (opsjon) Særlig godt egnet for: • Produksjon av vinduer og dører • Produksjon av profilerte aluminiumskonstruksjoner i gjæringsvinkel • Produksjon av aluminiumskonstruksjoner • Komposittprodukter • Produksjon av persienner, solskjerming og møbler • Salg av aluminium til detaljmarkedet Modell: A550 Lengde: 6 m Lineærenhet: ProfiStop Alpha Materiallengde: 4680 mm Skyvekapasitet: 20 – 40 kg Programvare: Optimiser KVALITETSMASKINER PRODUSERT I AUSTRALIA.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, lazerio galia: 3 000 W, galia: 3 000 kW (4 078,86 AG), įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, aušinimo tipas: vanduo, bendras ilgis: 6 000 mm, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, purkštukų keitiklis, NS-6022HG Rohrlaserschneidmaschine 3kW 3-Backen Profi-Rohrlaserschneidmaschine mit automatischem Beladesystem mit 6 m automatischer Entladung mit chinesischem 3D-Fasenkopf (BLT) Rohrtyp: T CE-Antistrahlungsglas Schutzeinrichtungen AVR Düsen-, Linsen-Set etc. (jeweils mehrere Stück) Serie: NS-HG Typ: Drei-Backen Fasfunktion: Standard Hnjdpjwu Rm Rofx Abvol Leistung: 3kW Maximale Rohrlänge: 7.000 mm Rundrohr: Ø15 mm–Ø220 mm Vierkantrohr: 15 mm x 15 mm–150 mm x 150 mm Rechteckrohr: 30 x 20 mm–160 x 80 mm Oval- / Flachovalrohr: Kurzachse ≥ 15 mm, Langachse ≤ 210 mm U-Profil: max. 20# I-Träger: max. 18# H-Träger: max. 175 x 90 mm Max. Beschleunigung: 1,0G Max. Spannfutterdrehzahl: 100 U/min Maschinengewicht: 10 t Netzanschluss: 380 VAC, 50 Hz Ausstattung: Servounterstützung (Fasnut), Staubschutz (Y-Achse), Staubschutz (X-Achse), Staubschutz (Z-Achse), Sicherheitszaun (Lichtvorhang), Null-Reststück-Technologie, Absaugung Schneidbereich, Absaugung am hinteren Futter (Hohlraum-Absaugung)

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: P 04-09-002, neu U05 10 001, Spray Automat Venjakob HGS-K All images for reference only. - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (expandable to 1000 mm) - Current condition: not refurbished - Offer price is for the refurbished condition - Operator side: right - Dual pistol drive system - Dry exhaust system: 4,000 m³/h - Exhaust connection diameter: 400 mm - Conveyor belt transport system - Feed rate continuously adjustable: 3 - 8 m/min - With paint recovery system - Gun control unit: LS 1 - Installed paint circuits: 1 - Airless spray system: 4 units of Krautzberger KAA 1300 - Number of paint pumps: 1 - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current consumption: 17 A, protection: 35 A - Location: in stock - Permissible voltage fluctuations: max. +/- 5% Hsdpfx Aoumvr Tjbvonl _____ Optionally, we can provide you with an offer for installation and commissioning of the system, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!