Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1539000771E, X ašies eiga: 1 035 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 510 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, padavimo ilgis X ašis: 1 035 mm, padavimo eiga Y ašimi: 560 mm, padavimo ilgis Z ašis: 510 mm, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, nominali (akivaizdi) galia: 17 kVA, sukimo momentas: 83 Nm, ruošinio svoris (maks.): 1 000 kg, bendras aukštis: 2 758 mm, bendras ilgis: 3 137 mm, bendras plotis: 3 355 mm, stalo plotis: 560 mm, stalo ilgis: 1 200 mm, stalo apkrova: 1 000 kg, sukimosi greitis (maks.): 8 000 aps./min, veleno greitis (maks.): 8 000 aps./min, veleno veikimo valandos: 5 039 h, ašies variklio galia: 13 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 20, įrankio ilgis: 300 mm, įrankio skersmuo: 80 mm, įrankio svoris: 6 000 g, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, - Pagaminimo metai: 2012 - Būklė: gera, naudota - Valdymas: Siemens 840D SL - Stalas: 1200 x 560 mm Hodpsyf E Shsfx Ab Aoh - Eigos: 1 035 x 560 x 510 mm - Špindelio greitis: 20 - 8 000 aps./min.

Sąlyga: geras (naudotas), Gamybos metai: 2015, Geros techninės būklės ir visiškai veikiantis. Pagaminimo metai: 2015. Maksimali stalo keliamoji galia: 1814 kg. Hsdpfx Absx U Tf No Ash X ašis: 2134 mm, Y ašis: 813 mm, Z ašis: 762 mm. Velenas: 8100 aps./min. Darbo laikas: 4770 val. M30 skaitiklis: 83 396 Valdymo sistema: Inline Direct-Drive Atstumas tarp veleno galo ir stalo (~maks.): 864 mm Atstumas tarp veleno galo ir stalo (~min.): 102 mm

Sąlyga: geras (naudotas), Gamybos metai: 1995, X ašies eiga: 1 000 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 600 mm, x eiga 1000 mm y eiga 600 mm z eiga 600 mm Valdymas: Heidenhain TNC 426 Veleno galas: 100–700 mm Darbo stalas: 1.080 x 580 mm Maks. ruošinio svoris: 550 kg T-plyšiai: 7 vnt. T-plyšio plotis: 14 mm Įrankių magazinas su 36 vietomis Maks. įrankio svoris: 8 kg Maks. įrankio ilgis: 340 mm Staklių svoris apie 6,2 t Užimamas plotas apie 4.790 x 5.330 x 2.905 mm Hjdpfx Aeyfpgisb Aeh

Sąlyga: geras (naudotas), Gamybos metai: 1999, X ašies eiga: 2 000 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, Valdymas: SIEMENS 840D X eiga: 2000 mm Y eiga: 500 mm Z eiga: 500 mm Priedas: 1 - 8000 mm/min Stalo dydis: 2120 x 550 mm Stalo apkrova: 2000 kp Greitoji eiga X ašis: 40 m/min Greitoji eiga Z ašis: 20 m/min Hsdpfxeyfpfxs Ab Aoh Įrankio laikiklis: HSK 63 A Veleno sūkių dažnis (be pakopų): 0 - 15000 sūkių/min Veleno variklis: 20 kW Veleno guolio diametras: 70 mm Padėties tikslumas: 0,020 mm Valdymas: SIEMENS 840D Įrankio diametras: 63 / 126 mm Įrankių magazinas (grandininis): 40 vnt. Bendras galios poreikis: 65 kVA Įranga: Skiedrų transporterio sistema

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Didžiausias pjūklo disko skersmuo: 400 mm Hedpfx Ajxx Hwwob Aoh Kampų rodymas skaitmeniniu būdu laipsniais (+/- 46 laipsniai) 2 x pneumatiniai spaustuvai Hidraulinis disko padavimas Variklio galia: 1,8 kW Skaitmeninis liečiamas ekranas Rankinis brūkšninių kodų skaitytuvas 6000 mm įtekėjimas su skaitmeniniu stūmikliu 4000 mm rankinis ištekėjimas su ritiniais

Sąlyga: geras (naudotas), Gamybos metai: 2008, Ref. Nr.: 10624 Gamintojas: HEDELIUS Modelis: RS 100 MAGNUM Pagaminimo metai: 2008 Valdymo tipas: CNC Valdiklis: HEIDENHAIN 530i Sandėliavimo vieta: Halberstadt Kilmės šalis: Vokietija X eiga: 3500 mm Y eiga: 1000 mm Z eiga: 770 mm Pagrindinio veleno variklio galia: 55 kW Stalo apkrova: 4000 kg Maks. įrankio svoris: 20 kg Hjdpjya Dbksfx Ab Aeh Maks. įrankio ilgis: 330 mm Maks. įrankio skersmuo: 125 mm Įrankio laikiklis: SK 50 Įrankių keitiklis: 50 vnt. Sukimosi greitis: 6000 aps./min. X/Y/Z ašių padavimo greitis: 30000 mm/min Papildoma informacija: - Su rotaciniu/pakreipiamu stalu (1,00 x 0,80 m) - Naujos kreipiančiųjų dangos Mašiną galima apžiūrėti prijungtą prie elektros tinklo.

Sąlyga: naudotas, Gamybos metai: 2005, - Fagor 8055 CNC control Hjdstvf Htopfx Ab Ash - Additional tank for through-spindle cooling (15 bar) 400 liters - Year of manufacture: 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Sąlyga: naudotas, Gamybos metai: 2001, aps./min. 18 000 - 24 000 X ašis 4 000 mm Hjdpex Uqr Tsfx Ab Aoh Y ašis 1 400 mm Z ašis 800 mm Staklės matmenys 6 400 mm x 2 600 mm x 3 800 mm

Sąlyga: geras (naudotas), Gamybos metai: 2008, X ašies eiga: 2 360 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 800 mm, For sale: 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully functional. Particularly noteworthy: Each of the two NC rotary tables allows for workpiece clamping up to Ø1,100 mm (see drawing). Technical Data: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Operating hours: Spindle hours: X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions (2 chains) NC rotary tables (2 units) Type: SKH-NC 7/T Table plate diameter: Ø 630 mm Max. load: 750 kg Clamping: hydraulic Dimensions: 5,650 mm × 3,700 mm × 3,200 mm Weight: approx. 22,000 kg Equipment includes: 50 bar high-pressure coolant system, belt filter, Heidenhain RCN 729 measuring system, Renishaw OMP 60 3D touch probe, electronic handwheel, 2x Visiport (inspection ports), chip conveyor. Tool holders are not included in the offer but can be supplied at extra cost. Hsdpfxjyfhrdj Ab Ash Transport and loading can be organized Europe-wide upon request, subject to additional charges. All prices plus VAT. Viewing possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery trading – Purchase / sale of production & metalworking machines and more. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, X ašis 1.500 mm Y ašis 660 mm Z ašis 600 mm Stalo dydis 1.680 x 660 mm Veleno greitis 12.000 aps/min Įrankio tvirtinimas SK40 Įrankių keitiklis 24 pozicijos Valdymas ULTIMAX 4 Įskaitant 4-ąją ašį Kitagawa MR 200 (sukamoji ašis + atrama) Įskaitant drožlių transporterį Įskaitant vidinę aušinimo sistemą (IKZ) Iš karto prieinama iš sandėlio Hsdpoxm Tufjfx Ab Aeh

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2005, veikimo valandos: 14 923 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 762 mm, Y ašies eiga: 406 mm, Z ašies eigos atstumas: 305 mm, padavimo ilgis X ašis: 762 mm, padavimo eiga Y ašimi: 406 mm, padavimo ilgis Z ašis: 305 mm, sukimo momentas: 45 Nm, valdiklių gamintojas: Haas, bendras aukštis: 2 700 mm, bendras ilgis: 2 200 mm, bendras plotis: 1 750 mm, stalo plotis: 267 mm, stalo ilgis: 1 213 mm, sukimosi greitis (maks.): 6 000 aps./min, bendras svoris: 1 315 kg, veleno greitis (maks.): 6 000 aps./min, ašies variklio galia: 5 600 W, veleno nosis: CT40/ISO/BT40, ašies skaičius: 1, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Three-axis vertical CNC milling machine Haas TM1 (TM-1) with a 6000 rpm spindle. The machine is offered by Haas service engineers with 10 years of experience. The machining center has undergone a full, comprehensive inspection; the machine is refurbished and ready for operation. Sale based on a bill of sale; VAT invoice can be issued. A twin machine will be available for sale soon, with the option to purchase both simultaneously. Possibility to sell the milling machine with installation and accuracy analysis using the advanced Renishaw Ballbar device, which performs a circularity test with an accuracy of 0.0001 mm / 0.1 µm. We provide service support for the machine if needed! We assist with transport and financing! The milling machine is equipped with several additional features: - upgraded spindle up to 6000 rpm, - rigid tapping, - zero point tracking (rotation & scaling), - M19 spindle orientation, - macros, - HSM (high speed machining), - intuitive programming system (visual part programming), - possibility to enable the fourth axis by adding an inverter and wiring, can be sold separately (fourth axis), - air cooling. Technical data: - Machine type: Three-axis vertical milling machine Haas TM1 - Year of manufacture: 2005 - Spindle speed: 6000 rpm - X axis travel: 762 mm - Y axis travel: 406 mm - Z axis travel: 305 mm - Table dimensions: 1213 x 267 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 507 mm - Dimensions (W x D x H): 220 x 175 x 270 cm - Weight: 1315 kg - 3 T-slots, 16 mm wide - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm Hsdpfx Abjyanlao Ajh - Spindle taper: CT40/ISO/BT40 The machine has been fully inspected. All ball screws, linear guides, lubrication system, spindle, spindle motor, encoder, vector drive, inverters, IO board, processor board, all components in the electrical cabinet, axis drives, tool changer, controller, and much more have been checked. Contact us for more information. We also offer import on request and pre-purchase inspections for all Haas lathes and mills, including VF, VM, DT, DM, Mini Mill, EC, UMC, ST, DS, SL, TL series, and many others.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, veikimo valandos: 17 550 h, Bendrieji duomenys Staklių svoris: 6800 kg Valdymo blokas Gamintojas: HEIDENHAIN Modelis: iTNC 530 HSCI Pagrindinė pavara Ašių skaičius: 3 Veleno apsukos: 42 000 aps./min. Judesio eiga X ašis: 600 mm Z ašis: 360 mm Hjdpfxex Nr Rgs Ab Ajh Y ašis: 450 mm Šios 3 ašių +GF+ MIKRON MILL S 500 staklės pagamintos 2017 metais. Jos pasižymi 600 x 450 x 360 mm eiga, iki 42 000 aps./min. verpstės greičiu ir 590 x 450 mm darbiniu stalu. Maksimali ruošinio masė – 200 kg. Puikiai tinka detalėms ir tikslioms apdirbimo užduotims. Dėl daugiau informacijos susisiekite su mumis. Pritaikymo sritys Frezavimas

Sąlyga: geras (naudotas), Gamybos metai: 2016, In good technical condition and fully operational. Year of manufacture: 2016. Machine includes 4-axis TSUDAKOMA, workpiece touch probe + tool touch probe. Axis travels (X/Y/Z): 1,000 / 550 / 500 mm Distance table surface to spindle face: 130 – 630 mm Axis guide: linear rolling LM Table working area: 1,100 x 502 mm Load capacity: 700 kg Table surface configuration: 5x T-slot (width 18 mm, spacing 80 mm) Spindle maximum speed: 12,000 rpm Spindle power (10 min/continuous) kW: 18.5 / 11 Rapid traverse (X/Y/Z): 36/36/30 m/min Feed rate (X/Y/Z): 1 – 24,000 mm/min Feed motor (X/Y/Z): 1.8 / 1.8 / 3.0 kW Automatic tool changer Tool taper: BT40 Pull stud: MAS P40T-1 (45°) Number of tool stations: 24 Max. tool diameter: Ø 80 / Ø 150 mm (without adjacent tool) Max. tool length / weight: 300 mm / 8 kg Tool-to-tool change time: 2.5 sec Chip-to-chip change time: 4.3 sec Magazine and changer disk with rotating arm design Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: 6 / 20 l For coolant emulsions: 380 l Machine dimensions height: 2,670 mm Footprint (L x W): 3,335 x 2,200 mm Weight: 6,500 kg Control system: Fanuc 0i-MD Spindle air blow Machine adjustment elements Hedpfx Asx Tti Ssb Aeh Machine enclosure Swarf conveyor in work area Cooling system Safety door Ethernet interface

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Control WIMNAX V09 (DSM) Table dimensions: 2184 x 865 mm T-slot in table: 7 x 18 x 125 mm Max. table load: 2268 kg X travel: 2134 mm Y travel: 864 mm Z travel: 762 mm Spindle speed: 12,000 rpm Drive power: 18 kW Spindle taper: SK40 ATC magazine: 40 stations Max. tool diameter: 74.9 mm Max. tool length: 300 mm Max. tool weight: 7 kg Rapid traverse X/Y/Z: 18, 18, 13.5 m/min Weight: 17,000 kg Dimensions (LxWxH): 7570 x 4450 x 3260 mm Accessories, Equipment: - Coolant system - DXF, NCPP, ISNC, Helical, Synchronous high-speed cutting, Pocket/Islands options - Internal coolant supply (IKZ) 20 bar - Spindle chiller - Chip conveyor - Manuals Hedpfxspiaqxj Ab Ajh Very good condition. Available immediately for sale. The tools shown are not included in the scope of delivery.

Sąlyga: naujas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Sandėlyje esanti nauja staklė Valdymas: Fanuc 0i-M su Manual Guide Hyundai Wia Fanuc serija Pagrindinis pavara: 18,5/11 kW - 117,7 Nm Veleno apsukų diapazonas: 12 000 aps./min Ašių skaičius: 3 Važiavimo atstumai: X ašis: 1 060 mm Y ašis: 510 mm Z ašis: 635 mm Greita eiga: X/Y 36 m/min, Z 30 m/min Stalas: 1200x500 mm Stalo apkrova: 800 kg Įrankiai: 30 vietų Įrankio laikiklis: BBT40 Aušinimas per veleną: 20 barų Grandininis drožlių transporteris/ kairėje Daugiau informacijos rasite pridėtame prospekte. Hodpfx Aboyf Nkzo Ajh Staklė prieinama iš karto. Galime suderinti apžiūros laiką Idsteine.

Sąlyga: geras (naudotas), Gamybos metai: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control With pallet changer. Table: 1100 x 600 mm Spindle taper: BT50, magazine with 40 positions Spindle speed up to 6,000 rpm Travel paths: X800 Y510 Z510, rapid traverse 32 m/min Machine without magnetic chip conveyors Hedpfewifzljx Ab Ajh Complete machine documentation available.

Sąlyga: geras (naudotas), Gamybos metai: 1997, CNC Vertical Machining Center MORI SEIKI Model: SV500-50 Year 1997 Control System: Fanuc MSC-518 Table Size: 1100 x 600 mm Travel Paths: X 800 – Y 510 – Z 510 mm, Rapid Traverse 32 m/min Spindle Taper: BT50 Hjdpfswa Nvujx Ab Aeh Spindle Speeds up to 6000 rpm Complete documentation available. The magnetic chuck is not included with the machine delivery. For further specifications, please refer to the data sheets.

Sąlyga: geras (naudotas), Gamybos metai: 2007, Used Mazak machining centre X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse (X/Y/Z): 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Including magnetic table Spindle speed: 12,000 rpm Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool changer Number of stations: 30 Spindle taper: SK 40 Hodpfx Absyfmz De Ash Max. tool diameter: 80 mm Max. tool diameter (with free adjacent pockets): 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg Control: Mazatrol 640M Interfaces: RS232, LAN, floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 12,000 kg Includes: - Various tools + Renishaw probe - Documentation / manual - Chip conveyor - Partition wall for pendulum machining - Electronic handwheel - EIA / ISO programming - Synchronous tapping - Through-spindle coolant 5 bar Complete, very good machine, immediately available!

Sąlyga: naudotas, Gamybos metai: 2002, Naudotas Victor apdirbimo centras Tipas: V Center 125 X ašis: 1250 mm Y ašis: 500 mm Z ašis: 600 mm SK 50 tvirtinimas Stalo matmenys: 1400 x 550 mm 6000 aps./min. Aušinimas per veleną: 15 bar Velenas: 18,5 kW Įrankių keitiklis: 32 pozicijų Hjdjyfmu Dopfx Ab Aeh Metai: 2002 Transportavimo matmenys: aukštis: 265 cm / gylis: 235 cm / ilgis: 450 cm

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 100 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 600 mm, CNC valdymas Sinumerik 828D Dviašis daliklis (4-asis ir 5-asis ašys) Elektroninis rankenėlė 24 pozicijų įrankių keitiklis IKZ (vidinis įrankio aušinimas) Drožlių sraigė Matavimo jutiklis Hodpfsyf Eqdex Ab Ajh Techniniai duomenys: X eiga: 1100 mm Y eiga: 650 mm Z eiga: 600 mm Stalo dydis: 1300x600 mm Įrankio kotas: SK40 Veleno sūkių diapazonas: 8000 aps./min Įrankių keitimo vietų skaičius: 24 Greitasis eiga X,Y,Z: 15,15,15 m/min Mašinos svoris apie: 7400 kg Techniniai duomenys, priedai ir mašinos aprašymas yra neįpareigojantys.

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Deckel Maho DMC 835V CNC apdirbimo centras Pagaminimo metai: 2008 Valdymo blokas: Siemens 840D su Shopmill Hjdpfx Abeyftvbo Aoh Einamieji judesiai (X/Y/Z): 835 mm / 510 mm / 510 mm Veleno greitis: 10 000 aps./min. Veleno galia: 14 kW Stalo matmenys: 1000 x 560 mm Stalo apkrovos pajėgumas: maks. 800 kg Didžiausias ruošinio aukštis: 720 mm Įrankių pozicijų skaičius: 20 Įrankio laikiklis: SK40 Svoris: apytiksl. 4 500 kg Priedai/pasirinkimai: Drožlių transporteris Dokumentacija Nuotolinio valdymo pultas Įrankių laikikliai

Gamybos metai: 1993, Sąlyga: paruoštas naudoti (naudotas), Vertical Turning Center Dörries Scharmann Model: VCE 2000/160 Pallet size: 1,600 mm Pallet load capacity: max. 8,000 kg Number of pallets: 13 units Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Crossbeam positions: 9 steps of 100 mm Feed rate X/Y/Z: 1 – 6,000 mm/min Rapid traverse X/Y/Z: 8 m/min Max. turning diameter: 2,000 mm Max. workpiece height: 1,500 mm Main Spindle Spindle drive motor: 69 kW Spindle speed: 2.8 – 315 rpm ATC for turning: 59 positions - System 240.2 Hsdpfx Absguk S Se Aoh Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1,500 rpm ATC for SK50: 61 positions CNC control: Siemens Sinumerik 880M Accessories: - FMS with 13 pallets - 2 rotary loading stations - Coolant unit with filtration system - Coolant through spindle Machine weight: Approx. 40 t Year of manufacture: 1993 (See also further offers from this seller)

Sąlyga: naudotas, Gamybos metai: 2009, X-travel 635 mm Y-travel 510 mm Z-travel 460 mm Control Siemens Ergoline Clamping area (table) 2x 790 x 560 mm Number of pallets 2 Rapid traverse 30 m/min Spindle speed range 8000 rpm Spindle drive power 13 kW Number of tools in magazine 30 pcs Tool holder SK 40 Weight 5.2 t Dimensions (L x W x H) 3.1 x 2.1 x 2.7 m Vertical CNC machining center with twin rotary pallet changer. Equipment: Hjdpfx Abetxctvs Ash - Twin rotary pallet changer - Chip conveyor - Coolant through spindle (IKZ) - Belt filter unit - Siemens ShopMill dialog programming - Oil mist extraction unit - External handwheel - Laser tool setter - Wireless 3D probe - Roto Clean - Signal lamp - Spindle oil cooler

Sąlyga: labai geros būklės (naudotas), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your full credentials, including a valid telephone number and email address, in order to submit an offer. DMG Machining Centre – CNC Milling Machine Model DMC 635 V Year of manufacture: 2009 Control: SIEMENS 840 D Operating hours: 7,445 h Spindle hours: 1,366 h !!! Travels (X/Y/Z): 635 x 510 x 460 mm Spindle speed: 20 – 10,000 rpm AC main drive: 13/19 kW (40/100% duty cycle) Hsdpsyc U E Sefx Ab Aeh Tool holder: SK 40 DIN 69871 Tool clamping: DIN 69872 Tool changer: 20 positions, double arm gripper Max. tool weight: approx. 6 kg Tool change time: approx. 1.6 sec. Chip-to-chip time: approx. 6.0 sec. Rapid traverse: 30 m/min Feed rate: max. 30,000 mm/min Feed force: max. 5 kN Table size: 560 x 790 mm Number of T-slots: 4 + 1 T-slot spacing: 100 mm T-slot width: 4 x 14 H12 / 1 x 14 H7 Max. workpiece weight: 600 kg Distance spindle nose to table: 120 – 580 mm Machine weight: approx. 4,500 kg Includes: - 3D control SIEMENS 840 D Solutionline with operator interface - ShopMill Open, DMG ERGOLine Control; 19" screen - Coolant/air blow-off switching external via M-function - Rinse gun for chip removal - Electronic handwheel - Levelling pads - Integrated machine light Please note: Machine vice depicted is not included. Technical specifications provided without guarantee. A tool package can be purchased additionally. Available from stock as of March. Condition: As new, with only 1,366 spindle hours from a vocational training centre.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C9-00710, Gamybos metai: 2001, keliamoji galia: 7 010 kg, kėlimo aukštis: 3 300 mm, bendras svoris: 6 890 kg, DDG INSOLVENCY I.P.U.R.L., having its registered office in Cluj-Napoca, 115 Septimiu Albini St., Cluj County, fiscal code RO27987796, registry no. 2A0522, through the insolvency practitioner Godorogea Daniel-Lucian, acting as judicial liquidator for ELEMENTO MOBILI S.R.L. – in bankruptcy, with registered office at 6 Dumbrava Roșie St., ground floor, apt. 1, Dej, Cluj County, registered with the Cluj Trade Registry under no. J12/2389/2016, VAT code 36225390, appointed by Civil Ruling no. 1278 of 03.07.2025 delivered by the Specialized Tribunal Cluj in file no. 442/1285/2025, organizes a public auction with ascending price, for the sale of the asset identified in this announcement. The first auction will take place on 11.02.2026 at 15:00, at the DDG Insolvency I.P.U.R.L. office in Cluj-Napoca, 115 Septimiu Albini St., Cluj County. In case the asset is not sold, the auction will be repeated on 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, and 18.03.2026, under the same conditions and at the same time. For asset viewing, the judicial liquidator will set a viewing day on 04.02.2026 between 10:00 and 14:00. Interested parties are invited to contact the judicial liquidator and express their intention to participate prior to the set date. In case of a successful sale, the judicial liquidator will issue a tax invoice for the acquired assets. Conversion of the price into RON will be made on the date of the invoice, using the exchange rate established by the National Bank of Romania on that date. The bidding increment is 5% of the starting price. The tender dossier for auction participation will be prepared by the judicial liquidator in accordance with industry practices, will contain the auction participation rules, and will be made available by the insolvency practitioner at the price of 500 RON + VAT. It can be acquired from the office of the judicial liquidator or by phone, following which it will be sent to the participant by e-mail. The participation guarantee for the auction is 10% of the starting price. This, along with the registration documents, must be submitted at least 24 hours prior to the auction date at the liquidator’s office. The participation guarantee will be deducted from the asset price for the successful bidder and refunded to those who are not declared winners. In case of equal offers, the bidder committing to pay the full price in the shortest term will be declared the winner. Hedpeyfmvujfx Ab Ash The payment term for the price is 5 working days from the adjudication date. Should the remaining price not be paid, the successful bidder will forfeit the guarantee and will not be allowed to participate in subsequent auctions.