Lenkimo staklės

Zopf T 300 Multisteuerung neue Ausführung

Būklė: naujas, Horizontal Bending Machine Fastech FP 40 Description • Pressing force: 40 t • Stroke: 285 mm • Max. tool height: 250 mm • Flat bar on edge: 200 x 24 mm • Working speed: 10.0 mm/sec • Return speed: 10.0 mm/sec • Working height: 930 mm • Table dimensions: 660 x 1250 mm • Total power requirement: 4.0 kW • Motor: 400 Volt, 50 Hz • Weight: 1100 kg • Dimensions (L x W x H): 1250 x 650 x 1250 mm • Oil capacity: 40.0 l Hjdpfxsfg Eu Re Alwot Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine constructed from hardened and ground forged steel • Digital display for stroke adjustment • 1x tool set • Double foot switch

Gamybos metai: 1998, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 0159488169537, Offer 23293 Hjdopuy H Dopfx Alwot Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel: 9 mm - or with special punching device: up to 100 mm Ø in steel: 2.5 mm - Stroke, infinitely adjustable: 0 to 28 mm - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - with: - Foot switch - Center punch locating device - Support table with folding stops, W 1100 x D 850 mm - Stop adjustment paths from center of punch - Width between left and right approx. 470 mm x D 510 mm

Būklė: naujas, Gamybos metai: 2026, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 liters Maximum workpiece height: 200 mm Capacity flat: 200x12 mm Tube capacity: 48x4.0 mm *not with standard tools Hsdohgib Nepfx Alwot - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design enables quick tool changes without any loss of precision - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring there is no loss of precision even under high loads - With the universal tool holder and various tools, you can work with maximum flexibility.

Būklė: naujas, - Capacity: 2070 x 6 mm - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Centralized lubrication system - Brake motor - Emergency stop - Documentation Hjdpfx Aolht N Ielwjt - 400V

Būklė: naujas, Gamybos metai: 2025, Rated output at 50% duty cycle: 35 kVA Short-circuit current: 19 kA Electrode force: 300 daN / single stroke Hedpokti Hzefx Alwet Throat depth: 395 mm Electrode arm spacing, stepless: 140–400 mm Electrode taper: Mk2 --- Welding controller: WS 708 (7-step, 8-program) --- Including additional options: - Foot switch - Main switch --- 6-month warranty --- Training and commissioning available on request --- Spot welding electrodes + spare parts available from stock

Gamybos metai: 2021, būklė: naujas, Fastech Horizontal Bandsaw Fully Automatic BMSO 350 GA Cutting capacity (round) mm: 350 Cutting capacity (rectangular) mm: 400 x 350 Cutting capacity (square) mm: 350 x 350 +30° Round cutting range mm: 320 +30° Flat cutting range mm: 400 x 350 +30° Square cutting range mm: 350 +45° Round cutting range mm: 320 +45° Flat cutting range mm: 290 x 300 +45° Square cutting range mm: 290 x 290 Main drive motor power kW: 2.2 Hydraulic pump power kW: 0.37 Hsdpfsg Ekt Nex Alwot Coolant pump power kW: 0.12 Infinitely variable blade speed mm/min: 20-100 Saw band dimensions mm: 4160x34x1.1 Working height mm: 760 Weight kg: 1050 Length mm: 2450 Depth mm: 920 Height mm: 2020 Roller conveyor 1200 mm Infinitely variable blade speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw band tension Saw band cleaning brush Control panel

Būklė: paruoštas naudoti (naudotas), Ilgis 6000 mm Plotis 2500 mm Bendras galios poreikis / kW Be kompiuterio ir programinės įrangos Hedpfoud Il Sjx Alwst Matmenys (I x P x A): 6000x2500x350 mm be vakuuminės plokštės Pagaminta pagal DIN876/II

Būklė: naujas, Pressure: 34.0 kN Stroke: 40 mm Hsdpfjfv Avysx Alwot Throat depth: 130 mm Working height: from 80 to 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Toggle lever pneumatic presses including fine adjustment of the working height via bevel gear with lateral crank — convenient and easy to adjust. Toggle lever pneumatic presses are used when the maximum pressing force is required shortly before the end of the stroke, e.g., for assembly, punching, embossing, riveting, etc.

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm Hsdpfondk N Ajx Alwot • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: • Welcome to test production in our in-house demo room • Consultation and information session on your premises • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: geras (naudotas), Clamping plate with T-slots and cross table, platen field, welding table, plate boring mill, T-slot plate, pallet changer -T-slot plate: clamping plate -Width: 1000 mm -Total length: 7060 mm, clamping area 6260 mm -Plate thickness: 235 mm -Slot width: 22 mm -Slot pitch: 125 mm -Dimensions: see drawing in the photos -Transport dimensions: 7060/1000/H235 mm Hedpfegvm D Hex Alwet