MULTIRIP diskinis pjūklas

WRAVOR DOO 20-160

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger-jointing press, foldable Gsdjwclkyspfx Acyebi - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine not for sale - Package cross conveyor The machine is in very good condition, with very few operating hours. Machine is still assembled, but available immediately.

Būklė: labai geros būklės (naudotas), pjovimo aukštis (maks.): 120 mm, pjovimo plotis (maks.): 700 mm, Right-hand machine, machine no. 188 hydraulic width adjustment, electrically adjustable Infinitely variable feed rate adjustment 0 - 80 m/min Drive motor 37 kW with V-belt pulley and motor tensioning rail Various saw heads, spacer rings, and saw blades Gbodsv Raqxepfx Acyei Infeed table with individual stands Fixed outfeed table The machine has been completely refurbished and is in top condition.

Būklė: geras (naudotas), Didžiausias rąsto skersmuo: 910 mm Didžiausias pjovimo plotis: 730 mm Mažiausias paskutinės lentos storis: 25 mm Didžiausias pjovimo ilgis: 6300 mm Mažiausias pjovimo ilgis: 1200 mm Rąsto masė: 2000 kg Padavimo greitis (sklandžiai reguliuojamas): iki 47 m/min Našumas (gatavas produktas): 1,8–3,0 m³/val. Pagrindinio variklio galia: 22 kW Skriemulio skersmuo: 600 mm Gjdpfoxd Tgvex Acyobi Wood-Mizer pjūklo ilgis: 4668 mm Wood-Mizer pjūklo plotis: 38 mm

Būklė: naujas, Gamybos metai: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Crosscut length: 1600 mm Gbjdpjhp Rdlofx Acyoi Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - immediately available -

Būklė: naudotas, Staklė: Didžiausias obliavimo plotis: 400 mm Didžiausias obliavimo aukštis: 240 mm Mažiausias apdirbamo elemento ilgis: 200 mm Peilio veleno skersmuo: 700 mm Peilių skaičius: 3 Peilio veleno apsukos: 5000 aps./min Rankinis darbo aukščio reguliavimas Lygiavimo staklė: Bendras stalų ilgis: 1810 mm Reguliuojami stalai Veleno triukšmo slopinimas Veleno apsauga Ištraukimo jungtis: 2x120 mm Gbjdpfxoxwvqde Acyei Pakreipiamas lygiuotuvės liniuotė Maitinimas: 400 V Variklio galia: 5 kW Bendri matmenys: Ilgis: 2030 mm Plotis: 800 mm Aukštis: 1160 mm

Būklė: naujas, Gamybos metai: 2022, New machine Year of manufacture: 2022 Standard equipment: - Electrically operated height and tilt adjustment, 0–46° with automatic correction of cutting height during tilting - Control unit at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Rip fence, manually adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4000 rpm - AKE clamping system for the main saw blade Godsw I Uxcjpfx Acyjbi - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Stepless speed adjustment from 2,000 to 6,000 rpm - Exact adaptation of speed to the material increases cutting quality and saw blade service life Extended cutting height for one-sided tilting: This option is equipped for one-sided tilting with a large extraction hood allowing a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, maximum saw blade diameter is 500 mm, maximum cutting height 179 mm. Only available in combination with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit for single-sided tilting - With electromotive height and lateral adjustment, scoring blade height programmable with rapid lowering and lifting, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofit only possible on machines prepared for scoring unit. LED lighting - Highly energy-efficient LED technology for clearly marking the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precise running. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, keep the upper carriage absolutely precisely aligned with the lower carriage on their respective hard-chromed round guide bars. This quality of movement is maintained even after decades of use and contamination. The carriage construction features a highly torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, positively fitted to the upper carriage, serves as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off switch on double roller carriage - The On/Off switch is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off. This saves steps and increases safety. Angle-mitre fence, crosscuts up to 3500 mm - This ALTENDORF-patented fence with integrated length compensation makes it easy to cut mitres and angles precisely in one function. In both positions, the swing angle is infinitely adjustable by up to 49° and is displayed via a measuring scale. The backlash-free and robust folding stops can be easily shifted and, as single stops, set along the full length up to a maximum of 3,500 mm.

Būklė: labai geros būklės (naudotas), TECNI-ARMENTIA CH-70 Edging Machine – Hydraulic control – Programmable cutting width – Memory for up to 12 programs – Centering table Gbodpfx Asidmptecyoi TECHNICAL SPECIFICATIONS: Maximum cutting width: 700 mm Maximum cutting height: 130 mm Main motor power: 55 kW Maximum material width: 830 mm Fixed sleeve length: 300 mm Movable sleeve length: 100 mm Minimum material length: 700 mm Spindle diameter: 65 mm Sleeve diameter: 85 mm Saw blade diameter: 350 – 400 mm Feed speed: stepless hydraulic adjustment Maximum feed speed: up to 38 m/min Infeed table length: 2700 mm Roller width: 700 mm Roller diameter: 140 mm Centering infeed table Two lasers Pump motor power: 4 kW Anti-kickback pawl row Three upper feed rollers Three lower feed rollers Hydraulic material hold-down Hydraulic height adjustment Dimensions (L/W/H): 480 / 200 / 230 cm Weight: 4000 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1300 x 2070 x 1135 mm Weight: 320 kg Total power requirement: 2.2 kW 5-in-1 Combination Machine K5 250-1300 Functions: Sawing, Spindle Moulding, Surface Planing, Thickness Planing, Slot Mortising Circular Saw: - Max. saw blade diameter: 254 mm - Saw blade bore: 30 mm Gbjdpjvz E Siofx Acyoi - Speed: 4750 rpm - Saw blade tiltable: 0°–45° - Max. cutting height at 90°/45°: 75 / 60 mm - Sliding table: 430 x 1300 mm - Motor power / Input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Spindle Moulder: - Spindle diameter: 30 mm - Spindle speed: 6500 rpm - Spindle length: 80 mm - Max. spindle stroke: 80 mm - Max. table opening: 144 mm - Motor power / Input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Surface Planer / Thickness Planer: - Cutterblock diameter: 75 mm - Cutterblock with 3 knives - Speed: 4000 rpm - Feed rollers diameter: 32 mm - Max. working width surfacing: 250 mm - Max. chip removal surfacing: 5 mm - Tiltable fence: 0°–45° - Max. working width thickness planing: 248 mm - Max. chip removal thickness planing: 2.5 mm - Max. workpiece height thickness planing: 190 mm - Feed speed: 8 m/min - Table size (surfacing): 1085 x 256 mm - Table size (thickness): 600 x 248 mm - Motor power output / input: 1.5 / 2.2 kW - Voltage: 400V / 50Hz - Dimensions: L=1300 mm, W=2070 mm, H=1135 mm - Table height: 850 mm - Weight: 320 kg

Būklė: naujas, The ALTENDORF F 25 offers everything a panel saw needs in a compact footprint. Whether it's for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be efficiently processed with maximum precision, straightforward handling, and outstanding cut quality. The saw unit, which can tilt to one side, also enables angle cuts. The smooth-running double roller carriage based on the Altendorf system, as well as digital height and tilting display, are standard features. A machine equally suited for both beginners and professionals. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Preparation for subsequent installation of a scoring unit ----- Technical Specifications ----- Tilting range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Gsdpsu R S Hcefx Acyebi Cutting height: 100 mm Max. saw blade Ø: 315 mm Max. blade projection: 104 mm Non-CE version: Max. saw blade Ø: 350 mm, Max. blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speeds: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood available as an option - - New display machine -

Būklė: naujas, Gamybos metai: 2025, The Multiblade or Single Shaft Multiblade Circular Saw SQUALO 515 in the LM version features an advanced movable blade system. The machine is equipped with motorized feed rollers on the work table as well as motorized top pressure rollers, ensuring effective all-wheel drive for precise and consistent transportation of wooden material. In the LM (Movable Blades) configuration, the cutting unit consists of one fixed blade and a variable number of movable blades (from one to three). These movable blades can be dynamically positioned to suit different edging requirements and multiple cutting operations. Gbodshpbxispfx Acyji A distinguishing feature of this model is the ability to expand the cutting capacity: by using special arbors, the number of blades used simultaneously can be increased up to six. It should be noted that blades mounted on these special arbors operate at a predetermined fixed distance, enabling efficient production of elements with standardized widths. This versatility allows the machine to easily switch from processes requiring flexible blade positioning to series production with fixed cutting intervals.