Obliavimo staklės, grublėjimo staklės

WOODFAST, WINTER TH530

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements Nodehlp D Njpfx Ahcolg - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-removable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Solid German engineering Spindle moulder with single-sided tilting, fixed spindle for a swiveling range from -5° to +45.5° Electronic positioning control for height and tilt adjustment, with zero point reset for height and offset positioning Electronic displays for position and spindle speed 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Nlodpfx Ahefpb Nmjcsg Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick clamping system for cutters Finely planed grey cast iron table with fixed frame support Control panel mounted below the fixed frame support Fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle diameter 30 mm, non-removable CE compliant GS tested

Būklė: labai geros būklės (naudotas), Thickness planer SICAR Forte 400 Working width: 400 mm Planing height: 300 mm Cutter block with traditional knives Nlodpst Rp Hxefx Ahceg 4-knife cutter block Cutter block speed: 5200 rpm Electric lifting and lowering of the worktable Main motor power: 3 kW 3 feed speeds CE certificate

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: 0-241-06-5232, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 12 608 h, pjovimo aukštis (maks.): 125 mm, pjovimo plotis (maks.): 2 200 mm, pjovimo ilgis (maks.): 4 300 mm, Plokščių pjūklas Holzma HKL11/43/22 Nlodoxfvp Aspfx Ahceg Maks. pjovimo plotis: 4300 mm Maks. pjovimo ilgis: 2200 mm Maks. pjovimo aukštis: 125 mm Pjūklas yra nuolatinėje eksploatacijoje, tad galima apžiūra darbo metu. Įrenginys bus prieinamas nuo 2026-03-02.

Būklė: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Nsdpehp Rcrefx Ahcjlg Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Nodpfx Ahsdh Tfgscolg Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Būklė: naujas, Key features of the machine: The TH 630 thickness planer is a robust and straightforward design intended for daily workshop use, with a cutterhead width of 630 mm. It features a large, heavy-duty ribbed cast-iron table, which completely eliminates vibrations during operation. The machine is equipped with an exceptionally powerful motor driving the cutterhead (fitted with serrated knives), ensuring even the most demanding wood planing tasks are performed with ease. Each knife is easily replaceable if worn or damaged. The table height adjustment is automatic upon entering the desired dimensions. The combination of these features allows for highly precise cutting settings. Highlights: - Worktable mounted on four screws - Controller for automatic table height adjustment - 120 mm cutterblock with 4 knives - Capability to process large workpieces Technical specifications: - Maximum planing width: 630 mm - Maximum planing height: 300 mm - Minimum length of workpiece: 280 mm - Cutterblock diameter: 120 mm - Number of knives: 4 - Knife dimensions: 630x30x3 mm - Power supply: 400 V - Total power: 7.5 kW Njdegpg E Sepfx Ahcjlg - Variable feed speed: 4–20 m/min - Electric table lift - Extraction port diameter: 150 mm - Weight: 890 kg - Table dimensions: 1050x630 mm - Cutterblock speed: 5,500 rpm Machine available immediately! Machine dimensions: - Length: 1,060 mm - Width: 1,060 mm - Height: 1,160 mm

Būklė: naudotas, Gamybos metai: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial conveyor chain 1 1/4" Joint trimming unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunctional profile trimming units CR-202 (FAST system, 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with profile trimming unit (depending on profile): 35-65 mm Edge thickness, coil: 0.4-3 mm Edge thickness, strip material: 0.4-22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (at length 140 mm): 85 mm Min. workpiece width (at length 250 mm): 50 mm Feed speeds: 10-14-18-20 m/min Central extraction connection: 200 mm Extraction connection (edge banding): 80 mm Extraction connection (joint trimming): 120 mm Glue tank capacity: approx. 3 kg Heat-up time at 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine offered without the workpiece return device shown in the photos Nedsv R Nk Uepfx Ahcslg Availability: short-term Location: Flörsheim

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, mašinos/transporto priemonės numeris: 241.125, Funkcionalumas: visiškai funkcionalus, Horizontalioji juostinė pjovimo staklės, gamintojas Schelling, skirtos medienos pagrindo medžiagoms pjauti HPO – pjovimo optimizavimo programa Pjūklo disko išsikišimas: maks. 95 mm Nodpfxox Ebzdo Ahcolg Pjūklo vežimėlio judėjimo greitis iki 120 m/min Pjovimo ilgiai: Modelis FH 4 430 – 4.300 mm Galima apžiūrėti veikiančią iki 2026 metų pradžios (numatomas išmontavimas) Didžiausias pjūklo disko skersmuo – 350 mm Išsikišimas – 95 mm Spaustuvo atidarymas 90 mm Pagrindinio pjūklo variklio galia – 15 kW Pjūklo brėžiantysis disko skersmuo – 300 mm Padavimo greitis pirmyn iki 80 m/min atgal 80 m/min Pjūklo padavimo greitis pirmyn iki 120 m/min atgal 120 m/min

Būklė: naudotas, mašinos/transporto priemonės numeris: 006849, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Nljdpfxewd Itmo Ahcsg Jointing unit: yes Multifunction unit: yes Maximum feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs