Hidraulinė presas

WMW-ZEULENRODA PYE 250 S 1 M

Sąlyga: naujas, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid materials, and profiles of all kinds. Lsdpfx Afod Hmnfe Ijrg Materials: Hard or soft steel, non-ferrous metals, plastics. Operation: After adjusting the workpiece support and the side stops, the burr-laden workpiece is lightly pressed against the brush, which rotates around its own axis. The workpiece itself is not rotated; the brush performs this movement. The type of workpiece material, the thickness of the burr, and the desired edge rounding determine the contact pressure and duration, which is typically about 1–5 seconds. Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, infinitely variable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 mm or 3 pieces Ø300 (250) x 35 mm Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400V, 50 Hz Rated current: 8A Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + suction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), during processing at maximum speed 82 dB(A) Scope of delivery: Rotary head deburring brush machine GratMaxx with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement No brushes included in delivery! Accessories: F50201 Circular brush, braided wire 0.38 mm F50202 Circular brush, steel wire 0.2 mm F50203 Circular brush, steel wire 0.38 mm F50204 Circular brush, VA braided wire 0.38 mm F50205 Circular brush, abrasive nylon U180 F50206 Circular brush, abrasive nylon U120 F50207 Circular brush, VA wire 0.20 mm For further technical data, please refer to the attached PDF document.

Gamybos metai: 2003, Sąlyga: naudotas, Pressure 100 t Stroke 10–130 mm Strokes per minute 30–90 spm Throat depth 330 mm Ram adjustment 100 mm Table surface 950 x 660 mm Ram surface 540 x 440 mm Table pass-through opening Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Lodpera Rr Esfx Af Ierg Pneumatic clutch-brake combination Press control Beutler Datatech Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation GSW straightening and feeding machine VRMA 40/78, year 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 73965, Techniniai parametrai: • Gamintojas: Rösler Oberflächentechnik GmbH (Vokietija) • Tipas: Centrifuga Z 1000 Lrodpfx Afjw Rc Ans Ijg • Pagaminimo metai: 2016 • Variklio galia: 11,0 kW • Maitinimas: 400 V / 50 Hz • Maksimalus apsukų skaičius: 2650 aps./min • Maksimalus apkrovimas: 65 kg • Maksimalus srautas: 1000 l/val. • Skysčio temperatūra (maks.): 40 °C • Užpildymo medžiagos temperatūra (maks.): 50 °C • Būgno vidinis skersmuo: 500 mm • Įrenginio svoris: 1200 kg • Gamybos numeris: 73965 Nauji pjovimo peiliai, tarpikliai ir centrifugos guoliai. Vandens talpos: švariam vandeniui 1x 2000L ir nešvariam vandeniui 1x 2000L, taip pat dumblo vežimėlis. Automatinis technologinio vandens papildymas.

Sąlyga: naudotas, Gamybos metai: 1998, Pressure: 315 t Lrodjvzxphspfx Af Ijg Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table surface: 1200 x 815 mm Table height above floor: 800 mm Ram surface: 1100 x 700 mm Downward speed: from 48 mm/s Return speed: up to 330 mm/s Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Weight: 23.0 t Space requirement approx. 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading/unloading in accordance with CE standards Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, front light curtain (Sick), and two-hand operation

Sąlyga: geras (naudotas), Gamybos metai: 2018, 1 used welding fume extraction unit Manufacturer: Kemper Model: System 8000 Year of manufacture: 2018 Technical Data Filter Number of filter stages: 1 Filtration method: Self-cleaning filter Cleaning process: Rotating nozzle Filter surface area: approx. 10 m² Number of filter elements: 4 Total filter surface area: 40 m² Filter type: Filter cartridge Filter material: ePTFE membrane Separation efficiency: > 99.99% Dust class: M General Data Extraction capacity: 3,500 m³/h Dimensions (W x D x H): 962 x 1,413 x 2,110 mm Weight: 590 kg Motor power: 3 kW Connection voltage: 3 x 400 V / 50 Hz Rated current: 6.5 A Sound pressure level: 65 dB(A) Compression force F: 6 N Additional Information Fan type: Radial fan, belt-driven Lrodowxpxyepfx Af Ieg Compressed air supply: 5 - 6 bar Air outlet: 355 mm Air inlet: 355 mm Dust collection container volume: 34 L Technical data subject to change/errors excepted.

Sąlyga: naudotas, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-980 SA Stock No. 15.207 Year of manufacture: 1972 Trough diameter: 1850 mm Total trough outer height: approx. 1150 mm Working tank / gross volume: max. 980 liters Usable volume: approx. 490 liters Maximum possible workpiece diameter: approx. 300 mm (measured diagonally) Screen area: 3400 cm² Speed: 1000 to 1700 rpm, steplessly adjustable Motor power: 22 kW Mains connection: 400 Volt, 50 Hz - Duty cycle manual and via timer - Stepless motor speed adjustment via DANFOSS drive controller type VLT 3032 (frequency inverter) - Manually adjustable eccentric imbalance weights Lsdpfjdzqn Dex Af Isrg - Trough with rubber lining - Sound-insulated cover with pneumatic lid opening - Manual separation gate - Built-in screening device after separation gate - Liquid inlet connection - Material outlet opening: 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 box of pyramid-shaped grinding media Required space (L x W x H): 3000 x 3000 x 2550 mm Transport dimensions (L x W x H): 2300 x 3000 x 2550 mm Net weight: 2500 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and gently tumbled. The constant relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Ekscentrinė presas 160 t / 1600 kN Siemens 1200 PLC Reguliuojamas eiga 16–160 mm Stūmoklio reguliavimas 100 mm Stūmoklio plokštė 740 x 420 mm Stūmoklio plokštės storis 100 mm Stalo plokštė 1200 x 600 mm Lrjdpfowir U Eex Af Iog Stalo plokštės storis 180 mm Variklis 15 kW Svoris 16 000 kg Naujoms mašinoms pristatymo laikas apie 5 mėnesius.

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), Press force: 1,600 kN, installation height: 750 mm, max. ram stroke: 500 mm, clamping area X/Y: 700 mm / 600 mm, frame passage: 800 mm, lateral frame opening: approx. 450 mm. Distance from clamping plate to floor: 680 mm, ram bore diameter H7: 60 mm, rapid traverse down/up: 500/400 mm/s, max. working speed: 35 mm/s. Dimensions X/Y/Z: 2,000 mm / 1,500 mm / 3,600 mm, weight: approx. 16,000 kg, control system: Panelware. Documentation available. On-site inspection is possible. Lrjdpfxottbd Tj Af Isg

Sąlyga: naudotas, Gamybos metai: 2008, Punching and Shearing Line, Complete Manufacturer: GEKA Year of manufacture: 2008 Model: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Controller brand: Fagor Technical data: General Specifications Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Controller Manufacturer: Fagor Lrsdoudbzyopfx Af Iog Model: CNC 8070 CNC main language: English CNC language adjustable: Yes Main drive shearing force: 2500 kN Workpiece X: 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness (steel): 16 mm Main electronic connection: 50 Hz/3P Additional equipment: 3x loading tables 3x side loading tables 3x unloading tables This GEKA ALPS-150 was manufactured in Spain in 2008 and has only 400 production hours. This machine offers a complete automatic solution for punching, marking, and shearing angles for medium and large steel profiles. With very few operating hours, this machine is in perfect condition.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1969, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 160 t, stalo plotis: 1 200 mm, stalo ilgis: 800 mm, darbinio aukščio: 600 mm, eigos ilgis: 650 mm, Įranga: apsaugos šviesos užtvara, Lasco TSP 160S Press A press in very good technical condition, available for sale from a decommissioned stamping facility in Poland. Modernized in 2019. Equipped with a new Simatic S7 control system and a new electrical cabinet. Optical safety barriers installed. Lsdsv E Rd Espfx Af Isrg The machine can be inspected under power – the press remains connected to the mains.