Vienos kolonos presas - hidraulinis

WMW Zeulenroda PYE 25 SS

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1977, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 27 500 mm, bendras plotis: 10 500 mm, bendras ilgis: 16 500 mm, spaudimo jėga: 25 t, stalo plotis: 630 mm, stalo ilgis: 500 mm, darbinis greitis: 200 mm/s, bendras svoris: 2 400 kg, atbulinės eigos greitis: 450 mm/s, stūmoklio plokštės plotis: 450 mm, ramplokštės ilgis: 360 mm, atstumas tarp stulpų: 800 mm, eigos ilgis: 500 mm, galia: 12,5 kW (17,00 AG), Hydraulic Press PYE 25 SS. Year of manufacture: 1977. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: - Maximum pressing force: 25 tons - Working pressure: 16 MPa - Upper table: 450 x 360 mm Rjdstzxvwopfx Agisp - Lower table: 630 x 500 mm - Daylight (clearance): 800 mm - Cylinder stroke: 500 mm - Downward speed: 200 mm/sec - Upward speed: 450 mm/sec - Power requirement: 12.5 kW - Weight: 2,400 kg - Height: 2,750 mm; Length: 1,650 mm; Width: 1,050 mm The machine is in very good technical condition. It has undergone a general overhaul. Inspection and on-site testing of the machine in operation are possible.

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Rodpfx Agsfxyhfoiop Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naudotas, Gamybos metai: 1992, Technical details: Spindle diameter: 100 mm X travel: 1,500 mm Y travel: 1,450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° CNC control: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 – 1,600 rpm / stepless Table load capacity: 4.0 t Table size: 1,100 x 1,400 mm Rjdpfx Asu Idqbjgisp Table rotation: 360° Feed rates X/Y/W/Z axis: 2 – 2,000 mm/min Rapid traverse X/Y/W/Z axis: 5,000 mm/min Total power requirement: 40 kW Electrical cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC boring and milling machine with hydraulic unit Equipment: Measuring probe electronic handwheel hydraulic weight compensation on Y axis universal milling head A wide range of accessories included – please inquire! In good condition.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1276, CNC Warm-Radialschmiedemaschine GFM SX-13 Baujahr: 1974 / (Modernisierung 2022) Neue Steuerung: PLC SIEMENS S7 Maschinennummer: 1276 Anzahl der Hämmer: 4 Schmiedekraft je Hammer: 160 Tonnen Hammerschläge / min: 700/min Rsdpfx Asq U R T Nsgisp Hammerlänge: 240 mm Einstellbereich Durchmesser: 80 mm Maximaler Schmiededurchmesser: Baustahl, Rundquerschnitt: Ø 130 mm Quadratquerschnitt: Ø 115 mm Kleinster schmiedbarer Durchmesser: Ø 25 mm Manipulator A max. Verfahrweg: 6.820 mm Manipulator B max. Verfahrweg: 7.150 mm Maximale Werkstücklänge: 6.000 mm Schnellgeschwindigkeit Manipulator: 400 mm/sec Gesamtanschlusswert: 300 kW, 380 V, 50 Hz Maschinenabmessungen: Schmiedehöhe über Boden: 615 mm Gesamthöhe der Maschine über Boden: 1.665 mm Gesamtlänge der Maschine: 32.670 mm Gesamtlänge des Fundaments: 33.400 mm Gesamtbreite der Maschine (ohne Zusatzausrüstung): ca. 3.885 mm Gesamtbreite des Fundaments: 16.000 mm Gesamtgewicht der Maschine: 84.000 kg

Gamybos metai: 2007, Sąlyga: visiškai atnaujintas (naudotas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading in case of wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handheld control for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Redpfx Aommfwusgijp Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and completely overhauled after receiving your order. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, FAT TUR 630AMN x 2000 CNC Siemens 840D Rok produkcji: 2010 Średnica toczenia: 630 mm Średnica toczenia nad suportem: 370 mm Długość toczenia: 2 000 mm Rodpfxew Ecuue Agijp

Sąlyga: naudotas, Gamybos metai: 2006, Full drilling diameter / mm Drilling depth / mm Number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated systems for complete machining of long, heavy workpieces with the highest requirements for precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Chuck diameter: 900 mm Weight: approx. 47,000 kg Ideal for precision pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Rsdpfxeuddimo Agiep Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (stepped) Center distance: 11,000 mm Swing diameter over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tons Max. external diameter: 850 mm Perfect for fine boring, honing, and demanding finishing processes with up to 50,000 Nm torque. Your advantages at a glance - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tons - High process reliability due to perfect machine synchronization - Ready for immediate use, well-maintained, and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large part manufacturing

Gamybos metai: 1981, Sąlyga: labai geros būklės (naudotas), Diametras griebtuvui: 1300 mm Redpfsk Dz N Iox Agiop Didžiausias tekinimo skersmuo: 1100 mm Tekinimo skersmens diapazonas: 460–1250 mm

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 200 mm, Mazak Quick Turn Nexus 350M CNC tekinimo centras su Mazatrol 640T Nexus CNC valdymu Pagaminimo metai: 2004.11 Tekinimo ilgis: 1.200 mm Maksimalus apdirbamo ruošinio skersmuo: 750 mm Standartinis apdirbimo skersmuo: 336 mm Maksimalus apdirbimo skersmuo: 420 mm Rjdpfjx Dccyex Agisp Strypo prateka: 102 mm Maksimalus pagrindinio veleno greitis: 4.000 aps./min 12 vietų revolverinė galva Kitagawa 12'' hidraulinis 3-žandų griebtuvas Atrama Staklių svoris: 7.500 kg Įskaitant įvairius revolveryje esančius įrankių laikiklius, 4x varomus įrankių laikiklius bei kitą papildomą įrangą. Priedai: 4x varomieji įrankiai Mazak įrankių laikikliai Drožlių transporteris

Sąlyga: naudotas, Gamybos metai: 1965, Max. core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Max. drilling diameter: 110 mm Total power requirement: 30 kW Machine weight approx.: 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - solid drilling approx. 2 - 50 mm - boring approx. 100 mm Max. drilling depth: 1,600 / up to 2,000 mm (see stroke/installation length) Drill carriage stroke approx.: 4,000 mm Distance between spindle heads: 5,000 mm Center height over guideways: 350/450 mm Rodpfet Hwucsx Agijp Drill carriage feed, infinitely variable: 20 - 200 mm/min Rapid feed of drill carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Working spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V – 50 Hz Overall machine/guideway length: 7,500 / 5,000 mm Total weight approx.: 10,000 kg Accessories / Special features: - Machine consists of the following elements: Main spindle on the left side, followed by a BOZA, powered table assembly with ball screw, BOZA with increased center height, and a spindle stock of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm. Very large and elaborate coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø. - Suitable for rotating workpiece/fixed drilling tool (ELB and BTA methods), as well as for stationary workpiece and rotating drilling tool. Internal (ELB) as well as external oil supply (BTA) possible. - Complete coolant system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rates: 17/40/120 and 220/500 L/min; capacity approx. 2,500 L. - Carriage feed via ball screw and infinitely adjustable DC motor; mounted table cross-adjustable approx. 500 mm, table approx. 800 x 800 mm for clamping cubic and cylindrical workpieces. Electrically controlled via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø. - Modernized control panel with speed display, feed adjustment and indication, kW display, feed/rapid traverse selection (left/right), etc. - 2 separate control cabinets, separate BOZA, sleeves, adapters, clamping aids, and much more. Condition: Good – ready for demonstration soon; machine is highly valuable due to accessories Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice Further deep hole drilling machines constantly in stock – please inquire with us.