VTL geležinkelio ratams RAFAMET KOB-125

RAFAMET KOB-125 KOB-125

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm Gbsdpfod Auacsx Abdeg • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: paruoštas naudoti (naudotas), TOS GEAR HOBBER FO16 Didžiausias ruošinio skersmuo: 1600 mm Krumplyno plotis: 560 mm Didžiausias modulis: 16 Didžiausias ruošinio svoris: 7000 kg Stalo paviršiaus plotas: 1350 mm Sukimosi greitis: 16 – 80 aps./min Gjdpfx Aboxwl R Tjdjbg Padavimai – ašinis: 0,05 – 1,5 mm/min Padavimai – radialinis: 0,25 – 6 mm/min Padavimai – tangentialinis: 0,13 – 4 mm/min Elektra – įtampa/dažnis: 380/50 V/Hz Bendra galingumo paklausa: 12 kW Staklių svoris apie 18,5 t Staklių matmenys apie 4,3 x 2,0 x 3,2 m Staklės turi papildomą galvą, komplektą krumpliaračių ir velenų. Yra vaizdo įrašas su veikiančiomis staklėmis.

Sąlyga: naudotas, Technical Details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm Table surface: 5500/12150 x 3000 mm Maximum workpiece weight: 70,000/105,000 kg Ram dimensions: 480 x 510 mm Milling spindle motor: 63 kW Spindle torque: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Milling spindle speed range: 6.3 - 4000 rpm Feed rate: 1 - 24,000 mm/min w-axis: 1 - 6000 mm/min Distance between columns: 3500 mm Clearance height: 3000 mm Total power requirement: 120 kW Machine weight approx.: 245 t Required floor space approx.: 29.0 x 7.7 x 8.1 m The machine is in an almost as-new condition and was fully modernized in 2020! with CNC SIEMENS 840 D automatic tool magazine for 153 tools automatic milling head magazine for 6 milling heads Machining module - straight - extra-long - Gjdpswc A Shofx Abdobg Machining module - standard angle - 4000 rpm, 144 x 2.5°, ISO 50 Machining module - slim, extended angle - 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 Machining module - universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2.5°, B-axis +/- 44 x 2.5°, ISO 50 Coolant system, chip conveyor

Sąlyga: labai geros būklės (naudotas), Tuscan LC38 x 3000mm CNC Drehmaschine Umlaufdurchmesser über Bett: 970 mm Umlaufdurchmesser über Planschlitten: 420 mm Spitzenhöhe: 490 mm Spitzenweite: 3000 mm 12-fach Duplimatic Revolver Reitstock Ausbohrstangenhalterung Ausbohrstange Gbsdpfxevtw Ime Abdeg 2 x 3-Punkt-Feste Lünette 1 x Mitlaufende Lünette Fanuc OiTC Steuerung C-Achse & angetriebene Werkzeuge Seriennummer: LC223806086 Baujahr: 2010 /10

Sąlyga: labai geros būklės (naudotas), Neu 2008 Umlaufdurchmesser über Bett – 600 mm (Ø 23,62 Zoll) Drehdurchmesser × Bearbeitungslänge – Ø 300 × 600 mm (Ø 11,81 × 23,62 Zoll) Max. Drehdurchmesser – Ø 380 mm (Ø 14,96 Zoll) Max. Verfahrweg Z-/X-Achse – 600 / 240 mm (23,62 / 9,44 Zoll) Z-Achse: FANUC 2,8 kW (4 PS) / 3.000 U/min X-Achse: FANUC 2,8 kW (4 PS) / 3.000 U/min Spindelbohrung / Zugrohrdurchmesser – Standard: Ø 77 / Ø 52 mm (Ø 3,03 / Ø 2,04 Zoll); Option: Ø 86 / Ø 77 mm (Ø 3,38 / Ø 3,03 Zoll) Spindeldrehzahl – Standard: 8" Spannfutter 3.500 U/min; Option: 8" Spannfutter 4.500 U/min, 10" Spannfutter 3.500 U/min Spannfutter-Durchmesser – Standard: Ø 8"; Option: Ø 10" Hydraulischer Reitstock – Hub 465 mm (18,3 Zoll), MK 4 VDI-Werkzeugstationen – Option: 8, Standard: 10 Kühlschmierstoffanlage Späneförderer Anschlusswert – 208–220 Volt / 100 Ampere / 3 Phasen / 60 Hz Stellfläche (L × B × H) – 4.080 × 1.675 × 1.842 mm (160,62 × 65,94 × 72,51 Zoll) Gbodpfx Aerfx Tnsbdog Gesamtgewicht (ca.) – 5.200 kg (11.440 lbs)

Sąlyga: geras (naudotas), Gamybos metai: 2004, Ref. No.: Lg 34522 High-Performance Punch Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) includes: - Infinitely variable drive - 2-connecting rod drive system - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 screen control - Recirculating oil lubrication Technical Specifications Maximum pressing force: 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke in B.D.C.): 320 mm Upright opening: 1,250 mm Table area: 1,250 x 730 mm Table pass-through opening: 1,160 x 140 mm Ram area: 1,250 x 450 mm Gedpoip Uqmofx Abdjbg Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roll feed VAMCO SP 150 Year of manufacture: 2014 Passage width: max. 150 mm Material thickness: max. 3.0 mm

Sąlyga: naudotas, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb Gbodpfxo Dvlis Abdjg * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Halter links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 3 000 mm, sukimosi skersmuo virš skersinio stumduko: 520 mm, X ašies eiga: 600 mm, Y ašies eiga: 150 mm, Z ašies eigos atstumas: 3 150 mm, Sukimos skersmuo 520 mm Sukimos ilgis 3000 mm Valdymas SIN 840 D Siemens z ašis 3150 mm z ašies padavimo greitis 1 - 40 000 mm/min greitasis z ašies judėjimas 40,00 m/min x ašis 600 mm x ašies padavimo greitis 1 - 30 000 mm/min greitasis x ašies judėjimas 30,00 m/min Pagrindinis velenas S1 Veleno apsukų diapazonas 1 - 3 300 aps./min Variklio galia prie 100% apkrovos 29,00 kW Veleno galvutė DIN 55026 - dydis A11 Veleno skersmuo prie priekinio guolio 160 mm Veleno kiaurymė 115 mm Gbsdpfx Aoxadk Dsbdeg C ašis 360 x 0,001 ° Frezuojantis velenas S2 Įrankių tvirtinimas Capto C6 Apsukų diapazonas be pakopų 1 - 6 000 aps./min y ašis -100 / +150 mm B ašis -110 / +110 ° Įrankių magazinas 100 pozicijų Bendras galios poreikis 145 kW Staklių svoris apie 24 t

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 124, Kaina pagal užklausimą Naudotas CNC vertikalus tekinimo staklės Gamintojas: MORI SEIKI Modelis: VL 55 Pagaminimo metai: 2001 Su CNC valdymu MSC 518, 12 pozicijų revolverine galvute ir drožlių transporteriu Tekinimo ilgis = 653 mm Tekinimo skersmuo = 550 mm Gsdewl An Iepfx Abdobg X ašis = 350 mm Z ašis = 660 mm Sukimosi greitis iki = 2000 aps./min. Veleno galia = 30 kW Svoris apie = 12,5 t

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Gsdpfx Abouxfucsdobg Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...