Lentynų sistemos

WMT Typ 24

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Fedpfowbh Ifox Ahwofw Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Būklė: naujas, Plieninė konstrukcija, matmenys 7 m x 32 m (galima pailginti), stulpų aukštis: 4,176 m (aukštesnis) ir 3,338 m (žemesnis). Kitose skelbimuose siūlome konstrukcijas su aukštesniais stulpais: 5 m (aukštesnis) ir 4,17 m (žemesnis), taip pat įvairių ilgių, su sieninėmis gegnėmis arba be jų. Fodpeychpwjfx Ahwsfw Visos medžiagos prieinamos iš karto, todėl klientai jas gali apžiūrėti prieš pirkdami ir greitai pradėti statybas be avanso mokėjimo rizikos. Mūsų konstrukcijos yra cinkuotos, kas užtikrina geriausią apsaugą nuo korozijos.

Būklė: naudotas, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Fedpet Hw U Nefx Ahwefw Drilling stroke: 150 mm Total power requirement: kW Machine weight approx.: t Space requirements approx.: m

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), - USATO - MACCHINA TAGLIO LASER FIBRA CON CAMBIO PALLET e SISTEMA DI CARICO/SCARICO Corsa asse X: 3270 mm Corsa asse Y: 1550 mm Corsa asse Z: 100 mm Area di lavoro: 3070 x 1550 mm Portata ammessa sul piano: 920 Kg Sorgente: AJ2000 Fiber; 2000 W Unità di controllo: AMADA AMNC3i Fjdpfx Aevhc S Hshwefw Peso: 11.200 Kg Dimensioni complessive: 10.028 x 2.900 x 2.000 mm Nota: con sistema di carico/scarico LKI 3015FLC-AJ - anno 2013; cambio automatico degli ugelli

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2002, veikimo valandos: 2 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 350523, Įranga: CE žymėjimas, Voltage: 380V Net weight: 1,400 kg Customs tariff number: 8458.1120 Dimensions: 180 x 128 x 172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter over cross slide: 115 mm Center height over cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm HEADSTOCK A2-4 / Camlock D1-3’’ Spindle for collets Schaublin Hainbuch / F38 / B32 Spindle speed: 50 – 5,000 rpm AC motor drive – continuous/intermittent power: 5.5 / 7.5 kW AC motor drive – continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bar: 1,150 daN CROSS SLIDE Transverse travel, X-axis: 190 mm Resolution, X-axis (radial): 0.0005 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 32 x 5 mm Ffsdox Upugspfx Ahwjw FEEDS Working feed, X and Z axes, stepless: 0 – 5 m/min Rapid traverse, X and Z axes: 8 m/min REVOLVER TOOL SYSTEM Standard tool holder interface: VDI 20 Number of fixed/rotating tool stations: 8 / - Max. tool size: 16 x 16 mm Integrated coolant supply and bi-directional indexing: Yes COOLANT Tank capacity: 55 L Pump capacity: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Quill outer diameter: 45 mm Quill stroke: 70 mm Adjustable thrust force: 25 – 260 daN All technical data is provided without obligation and subject to errors or omissions. Fully overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Headstock: Disassembled, cleaned, worn and defective parts replaced, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. New paint. Turret: Disassembled, cleaned, worn and defective parts replaced, newly painted, and mating surfaces skimmed. Tailstock: Disassembled, inspected, and overhauled. Newly painted. Hydraulics and pneumatics: Disassembled, motor checked, hoses and worn/defective parts replaced. X-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Z-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Electrical cabinet: Completely checked, various relays replaced. Paint: Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer's protocol. Various accessories checked and cleaned. Year: 2002

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 540 mm, Y ašies eiga: 240 mm, veleno greitis (maks.): 1 650 aps./min, veleno greitis (min.): 45 aps./min, veleno tvirtinimas: MK 4, gerklės gylis: 350 mm, plunksnos brūkšnys: 130 mm, bendras ilgis: 1 250 mm, bendras aukštis: 1 900 mm, stalo plotis: 225 mm, bendras plotis: 1 100 mm, stalo ilgis: 800 mm, gręžimo pajėgumas: 40 mm, veleno nosis: MK-4, nominali galia: 2,2 kW (2,99 AG), Drilling and milling machine, drilling capacity Ø 40 mm, dual-speed motor 1.9/2.2 kW, table size 800x225 mm, spindle speed 45-1650 rpm with stepless variator, MT-4, machine lamp, motorized table elevation, automatic feed, fine feed adjustment, depth stop, coolant system, dimensions 1250x1100x1900 mm, weight approx. 600 kg. Fedewt Swzepfx Ahwofw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Cutting length: 1060 mm Cutting angle: 2 ° strokes per minute: 50 spm Motor power: 4.0 kW Machine weight approx.: 0.67 t Motorized guillotine shear, type 165.03 Technical specifications: Working width (cutting length): 1060 mm Maximum sheet thickness: 2.5 mm at 400 N/mm² Machine stroke rate: approx. 50/min Fedpfxeua Iulo Ahwofw Cutting angle: 2° Hold-down opening width: 5 mm Factory setting for blade clearance: 0.1 mm - Digital display for backgauge - Front table support - Operating manual available

Būklė: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? Ffodpjwbknbefx Ahwsw We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Būklė: naudotas, Gamybos metai: 1997, veikimo valandos: 50 161 h, mašinos/transporto priemonės numeris: 080163, Parduodama Trumatic 600L 1600. Perforavimo dalis yra geros būklės. Lazerio daliai reikalinga priežiūra. Ffedpfx Ahsu Hxmzowow

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 041613, Presavimo ir štampavimo staklės TRUMPF Trumatic 500 Pagaminimo metai: 2000 Ffodpfx Ahsx Td Edswew