Platus juostinis šlifuoklis

WINTER SANDOMAT RP-630 SHORT DELUXE

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Point-to-point CNC drilling machine MASTERWOOD SPEEDY 207 used machine for custom-made furniture production, kitchen furniture, bathroom furniture, and various applications Drilling head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with a drilling capacity of 1390 x 750 mm and two lateral elevating stops controlled by the control unit, enabling the processing of panels up to 2800 x 750 mm with just one program and an intermediate stop Capability to drill panels up to 2800 mm length Lrsdpowd Irvefx Apnou Pneumatic tool displacement 60 mm Max. panel thickness 50 mm Spindle speed 4,500 rpm Saw rotation speed 6,000 rpm Vacuum pump motor 1.5 HP Suction cup diameter 80 mm Front stop equipped with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control unit with interactive graphical programming, 9-inch display, drilling programs, working cycle optimization, graphical, parametric, and diagnostic modes Overall dimensions – machine: 2500 x 1800 x 1800 h mm – Weight 850 kg Overall dimensions – control panel: 800 x 520 x 1200 mm – Weight 120 kg

Būklė: naujas, Gamybos metai: 2025, stalo ilgis: 900 mm, stalo plotis: 450 mm, ašies skaičius: 1, veleno greitis (min.): 8 000 aps./min, stalo apkrova: 500 kg, Vertikalbearbeitungszentrum VMC 650, CNC-gesteuerte Fräsmaschine Das VMC 650 Bearbeitungszentrum ist eine multifunktionale Anlage, mit der Sie Fräs-, Bohr-, Gewindeschneid- und bei entsprechender Ausstattung auch Drehbearbeitungen im Automatikbetrieb durchführen können. Die CNC-Fräsmaschine VMC 650 ist wahlweise mit einem Werkzeugmagazin mit 16 oder 24 Stationen ausgestattet. Je nach Kundenwunsch kann die Fräsmaschine mit einem CNC-System von GSK, Siemens oder Fanuc geliefert werden. Optional ist der Antrieb einer Y-Achse nachrüstbar. Als sehr sinnvolles Zusatzpaket empfehlen wir den Einbau eines Späneförderers, der Ihnen im Betrieb wertvolle Zeit spart. Technische Daten: Arbeitstischgröße: 900 x 450 mm Maximales Werkstückgewicht: 500 kg Lsdpfx Apexc I Dgonsru Verfahrwege X/Y/Z: 800/450/500 mm Maximaler Abstand Spindel – Tischoberfläche: 120 – 620 mm Motorleistung: 5,5 – 7,5 kW Maximale Spindeldrehzahl: 8.000 U/min Spindelaufnahme: BT40 Positioniergenauigkeit: ±0,008/300 mm Wiederholgenauigkeit: ±0,005 mm Maschinenabmessungen: 3.000 x 2.275 x 2.550 mm Maschinengewicht: 4.000 kg Wir liefern auch CNC-Fräsmaschinen und Bearbeitungszentren mit anderen Tischgrößen: VMC 850 – Tischgröße: 1.000 x 500 mm VMC 855 – Tischgröße: 1.000 x 550 mm VMC 1060 – Tischgröße: 1.200 x 600 mm VMC 1160 – Tischgröße: 1.200 x 600 mm VMC 1275 – Tischgröße: 1.300 x 700 mm VMC 1370 – Tischgröße: 1.400 x 700 mm VMC 1580 – Tischgröße: 1.600 x 800 mm VMC 1680 – Tischgröße: 1.700 x 800 mm VMC 1890 – Tischgröße: 2.000 x 900 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, Kaum gebrauchte UV-Linie für Platten oder Fußböden Lrjdpfx Ajv Ux R Sspnsu

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, hidraulinio cilindro reguliavimas: 40 mm, įrengimo aukštis: 2 400 mm, bendras plotis: 17 000 mm, stalo ilgis: 400 mm, stalo plotis: 400 mm, spaudimo jėga: 25 t, eigos reguliavimas: 17 mm, darbinis plotis: 200 mm, bendras svoris: 2 500 kg, paskutinio kapitalinio remonto metai: 2023, galia: 0,003 kW (0,00 AG), Manufacturer: MABU Model: 25 VPR. Made in Germany. Completely overhauled in Dec. 2023. Max. Pressure: 250 kN (25 t). Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand start and foot pedal start. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Ledpfeq Ikhpex Apnjru Max. tool dimensions: 400 x 400 mm. Power: 3 kW. Voltage: 230 / 400 V. Air supply: 5.5 bar. Feed unit: Silicon SFS 200 on the left side. Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu Pf 1.3 control system. Front and rear safety guards with viewing windows. Technical documentation and operating manual included in English and German. CE certificate and EUR-1 certificate of origin. In stock, tested and ready for dispatch. Additional used machines from Mabu, Bruderer, Bihler, and Schaal are available for sale in our warehouse.

Būklė: geras (naudotas), Gamybos metai: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table opening: 100 mm Ram surface: 120 x 100 mm Installation height: 250 mm Total power requirement: 1.1 kW Machine weight approx. 1,150 kg Lrodpst Tqglofx Apnou Space requirement approx. 0.96 x 1.34 x 1.88 m - Positive-locking Ortlinghaus clutch - Not suitable for manual loading operations - The press has been tested in our facility and is delivered with a current UVV (accident prevention regulation) inspection certificate

Būklė: naujas, Gamybos metai: 2025, Spindle Moulder Minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment cost Item Number: 5502045 Brand: Holzkraft / SCM Ljdpfx Aohp Rcyopnoru TECHNICAL DATA Dimensions and Weights Net weight approx.: 290kg Extraction Connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1000mm Sliding table length: 1000mm Worktable width: 435mm Sliding table width: 270mm Table height: 900mm Installation Information Required space length: 1945mm Machine body width/depth: 710mm Required space width/depth: 2220mm Working area length: 1600mm Note on required space: The dimensions include maximum travel and usable lengths. Working area width/depth: 1600mm Machine body length: 1000mm Note on working area: Please add the specified dimensions to the required space to obtain the recommended free installation space for the machine. Electrical Data Supply voltage: 400V Drive motor power: 5.0kW Mains frequency: 50Hz Spindle Spindle tilt: 0 to -45° Spindle speed(s): 3500/7000/10000rpm Usable spindle length: 100mm Spindle shaft diameter: 30mm Max. spindle protrusion above table: 130mm Max. Tool Diameters Max. retractable tool diameter: 180mm Max. tool diameter for tenoning: 275mm Max. tool diameter for profile milling: 210mm SCOPE OF DELIVERY Curved guard hood Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Būklė: nepatikrintas (naudotas), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Lrsdpfx Ast Tqy Eopneu Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Weinig Powermat 700 6 ašių keturpusė obliavimo staklė Apačioje - dešinėje - kairėje - viršuje - viršuje - apačioje Staklės kaip naujos – 0 darbo valandų 6x Weinig Powerlock, 8000 aps./min. Padavimo greitis 5-40 m/min Padavimo stalas 2 metrai Ašiniai ir radialiniai CNC reguliavimai 2, 3 ir 5, 6 ašims Lodpfx Aszy Nvljpnoru Radialinis CNC reguliavimas 4 ašiai Stalo paviršiai su Marathon danga Automatinė Waxilit pompa Comfort Set valdymo koncepcija Powercom Plus

Gamybos metai: 2014, būklė: beveik kaip naujas (naudotas), "EASY PLUS" electronic control via control panel, 2 axes: - Automatic control of the left vertical spindle and upper horizontal spindle positions. - Feed speed selection. - 7" color LCD display Min. working width (finished dimension) 25 mm Max. working width (finished dimension) 230 mm Min. working height (finished dimension) 6 mm Lrodpfx Apjh Nvt Usnju Max. working height (finished dimension) 120 mm Min. length of single workpiece 450 mm Variable feed speed controlled by inverter 5 - 25 m/min Pneumatic pressure on feed rollers Front upper feed roller in the jointer section Feed motor power 3 kW Jointer motor power 5.5 kW Vertical spindle motor power (each) 11 kW Upper horizontal spindle motor power 9 kW Spindle speed 6000 rpm Spindle diameter 40 mm Vertical spindle length 140 mm Horizontal spindle length 250 mm Axial adjustment of vertical spindles relative to the worktable 40 mm Axial adjustment of horizontal spindles relative to the right fence 40 mm Min./max. cutter diameter on the jointer 120 – 140 mm Min./max. cutter diameter on vertical spindles 100 – 180 mm Max. profile on vertical spindle 40 mm Min./max. cutter diameter on upper spindle 125 (100–180) mm Feed roller shaft diameter 140 mm Infeed table length 2000 mm Quick adjustment of infeed table and fence 10 mm Manual lubrication pump for the table STD

Gamybos metai: 1994, būklė: paruoštas naudoti (naudotas), A Hermle CNC universal milling and drilling machine is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4,200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4,400mm/4,250mm/2,300mm, weight: approx. 4,500kg, control system: Heidenhain TNC 425. Documentation is available. Inspection on site is possible. Lodpsw D Evlofx Apnsru