Briaunų apklijavimo mašina

WINTER KANTOMAX BASIC FÜ

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min. / max. edge thickness: 0.4 – 2 mm - Min. / max. edge height: 15 – 55 mm - Min. / max. workpiece height: 15 – 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch panel) located at machine infeed at eye level - Chain feed system - Support plate for PVC and ABS edging rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable upper pressure – Teflon-coated glue pot for hot-melt adhesive granulate, capacity 3 kg Gedpfjvz E Tmsx Acyjbi - Glue application to the workpiece by glue roller - Electronic temperature control, working temperature 180 – 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Joint trimming unit with 2 HM (carbide) jointing cutter heads for pre-trimming before glue application, spindle adjustment vertical, electro-pneumatic control horizontal, 2 motors each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for preheating the panel - Pre-trimming from the roll - 3 solid steel pressure rollers - Top and bottom flush and radius trimming unit with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner copying (profile trimming) unit top and bottom for flush and corner rounding of PVC edges, motor 0.55 kW, 200 Hz, 12,000 rpm - Radius scraper unit with sensing from top, bottom, and side for rounding pre-trimmed PVC edges - Buffing unit for finishing upper and lower edges, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, angle and height adjustable - Spray nozzle system (cleaning liquid) - Total connected load: 8.0 kW / 400 V - Extraction port: 4 x Ø 100 mm - Extendable workpiece support - Sound-insulation enclosure with viewing window - Compressed air connection: 6 bar - Machine dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, SCM Olimpic K 560 Automatinė briaunų klijavimo staklė, pagaminimo metai 2018, parduodama! Komplektacija: - Grandininio padavimo greitis: 12/18 m/min - Briaunos storis: 0,4–3 mm - EVA klijai - Plokštės frezavimo mazgas „RT-V“ - Klijų padavimo mazgas „VC-S4.1“ - Briaunos apipjovimo mazgas „K-SEL“ - Briaunos frezavimo mazgas „R-K“ - Briaunos kampų apvalinimo mazgas „ROUND X“ - Briaunos grandymo mazgas „RAS-K“ - Poliravimo mazgas „SP-V“ Techninės charakteristikos: - Konvejerio greitis (dviem greičiais): 12–18 m/min - Min / maks. detalės storis: 8–60 mm - Lipdomos medinės briaunos storis: 0,4–6 mm (8 mm HP komplektacijoje) - Lipdomos ruloninės briaunos storis: 0,4–3 mm - Maksimali ruloninės briaunos ploto vertė: 135 mm² - Ritės laikiklio „lėkštės“ skersmuo: 780 mm - Maksimalus klijuotos briaunos užlaida, lyginant su detale: 2+2 mm - Mažiausias atstumas tarp gabenamų detalių: 600 mm - Minimalus detalės ilgis (kai detalės plotis min 100 mm): 140 mm - Minimalus ruloninės briaunos ilgis: 180 mm - Minimalus medinės briaunos ilgis: 220 mm - Minimalus detalės plotis (kai detalės ilgis min. 210 mm): 95 mm (60 mm opcija) - Praplatinimo atramos plotis: 560 mm - Darbo stalo aukštis nuo grindų: 900 mm Plokštės frezavimo mazgas „RT-V“: - Maksimali nuimamos drožlės plotas: 55 mm² - Maksimali frezavimo storis: 3 mm Gsdpew Sw Tksfx Acyjbi - Min./maks. detalės storis: 8–45 mm (60 mm opcija) - Variklio galia: 2 x 1,5 kW - Frezos skersmuo: 100 mm - Frezos aukštis: 49 mm (64 mm opcija) - Įrankio apsukų greitis: 9000 aps./min.

Būklė: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height): 3810 x 575 x 1520 mm Weight: 1000 kg Total power requirement: 8 kW Edge Bander KANTOMAX BASIC FÜ+EK - Min. / Max. edge thickness: 0.4 – 2 mm - Min. / Max. edge height: 15 – 48 mm - Min. / Max. workpiece height: 10 – 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 120 mm - Feed motor: 1.1 kW - Feed speed: 8, 12, 16 m/min - Control panel at eye level at machine infeed - Chain feed - Support plate for PVC and ABS edging tape - Pressure zone with pneumatically driven main pressure roller and follow-up pressure rollers for compressing the glue joint - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granules - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature: 180 - 200 °C - Pneumatic guillotine for edge trimming - Pneumatic cylinder for workpiece spacing - Jointing cutter unit with 2 DIA jointing cutter heads for pre-milling before the gluing unit, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors, each 1.8 kW, 200 Hz, 12,000 rpm (1 x clockwise, 1 x counter-clockwise) - End trimming saw unit for front and rear edge overhangs, high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pulling saw cut for high accuracy - Flush and radius trimming unit above and below with vertical and horizontal tracing, 2 motors, each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit (corner copying) above and below, for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from above, below, and side for rounding pre-milled PVC edges - Buffing unit for improving grip of edges above and below, 2 motors, each 0.18 kW, 50 Hz, 1400 rpm, angle- and height-adjustable - Total power consumption: 8.0 kW / 400 V - Extraction nozzle: Ø 100 mm - Extendable workpiece support - Sound insulation enclosure with viewing window Gbedpfovz E Scex Acysi - Compressed air connection: 6 bar - Dimensions: L = 4000, W = 1000, H = 1420 mm - Transport dimensions: L = 3810, W = 575, H = 1520 mm - Weight: 1000 kg

Būklė: naudotas, Gamybos metai: 2021, Numerical Control MEGA 300 TS Panel height 60 mm PVC/ABS up to 3 mm Feed speed up to 22 m/min Electronically adjustable working height via CNC Powered pressure belt with increased pressure Infeed system for small panels Panel support guide with electronic CNC adjustment Side roller conveyor with idler rollers for panel support Anti-adhesive unit Rectifying unit with two CNC electronically adjustable motors Roll holder plate for sensitive edges Edge magazine with 2 positions Gluing unit for EVA adhesives with glue tank and pre-melter Edge pressure unit on straight profiles with electronically adjustable pressure rollers via CNC Anti-adhesive unit Milling unit with 2 motors and automatic tilting adjustment Trim unit with 2 vertically arranged motors Trimming/chamfering group with 2 tilting motors, electronically adjustable via CNC Corner rounding unit with 4 motors Edge scraping unit, electronically adjustable via CNC Glue scraping unit Oscillating brush unit Hot air dryer unit Godpfx Acjt Hal Dsysbi

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Briaunavimo staklės Gbjdjxix Hxepfx Acysi Gamintojas: Felder Modelis: Tempora 60.06, F600 Pagaminimo metai: 2019 Pilnai automatinis valdymas iš valdymo pulto. Sujungimo agregatas: Taip Nukirtimo pjūklas: Taip Spindulio frezavimo agregatas: Taip Spindulio nuėmimo peilis: Taip

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, Šis SCM Olimpic K560 kraštų šlifavimo staklės buvo pagamintas 2019 m. Jame yra 7 colių jutiklinis ekranas su "Touch 7" elektroniniu valdymu, jis palaiko 0,4-3 mm storio apvadus ir apdoroja nuo 8 iki 60 mm storio plokštes. Mašinoje užtikrinamas 12-14 m/min padavimo greitis, joje yra karšto oro briaunų apklijavimo sistema. Susisiekite su mumis ir gaukite daugiau informacijos. • Mašinos būklė: Geros būklės • 7 colių jutiklinis ekranas (16:9) su "Touch 7" elektroniniu valdymu • Apvadų storis: 0,4-3 mm • Plokštės storis: 8-60 mm Gbodsyabq Aopfx Acyji • Mažiausias plokštės ilgis: 140 mm • Mažiausias skydo plotis: 100 mm • Padavimo greitis: 12-14 m/min • Karšto oro kraštų apklijavimo sistema

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, Feed speed X-axis: 9 m/min Overall length: 3,200 mm Maximum workpiece height: 45 mm Maximum edge thickness: 3 mm Type of height adjustment: mechanical Input voltage: 400 V Material removal: 2 mm Godpfx Aewat Alecysbi Technical data Year of manufacture: 2014 Edge thickness: 0.4–3.0 mm Motor voltage: 3x 400 V Motor frequency: 50 Hz Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece height: 8–45 mm Chain feed: 9 m/min Cross-cut saw unit: Yes Radius scraper unit: Yes Flat scraper: Yes CE version Jointing unit for up to 2 mm material removal Automatic feeding for roll materials Manual feeding for strip materials Guillotine for hard PVC/ABS up to 3 mm thickness Glue application via glue roller Cross-cut saw unit, 12,000 rpm, 0.27 kW 2 carbide saw blades D-100 mm Z24 Multifunctional milling unit with 2 HF motors, 0.35 kW for radius, flush, and chamfer milling for thin edges Extraction connections: 2x80, 1x120 mm Max. connected load: 7.5 kW at 3x400V / 50Hz

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2650x640x1400 mm Weight: 700 kg Total power requirement: 5 kW Edgebanding Machine KANTOMAX BASIC - Min. / Max. edge thickness: 0.4 - 3 mm - Min. / Max. edge height: 15 - 55 mm - Min. / Max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed drive motor: 1.1 kW - Feed speed: 12 m/min - Operator panel at infeed in eye level - Chain feed system - Support plate for PVC and ABS edge banding - Pressure zone with pneumatically operated main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable top pressure - Glue pot with Teflon coating for hot-melt adhesive granulate - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic roller guillotine - Pneumatic cylinder for workpiece spacing - Trimming saw unit for front and rear edge overhang. High-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull saw cut for high accuracy - Flush and radius milling unit upper and lower with vertical and horizontal tracing, 2 motors, each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with upper, lower, and lateral tracing for rounding pre-milled PVC edges - Buffing unit for finishing edges top and bottom, 2 motors, each 0.18 kW, 50 Hz, 1400 rpm, height-adjustable - Total power consumption: 5.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Noise reduction enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg Gsdpfx Aovz E T Hocyobi