Briaunų apklijavimo mašina

WINTER KANTOMAX BASIC FÜ+EK

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min. / max. edge thickness: 0.4 – 2 mm - Min. / max. edge height: 15 – 55 mm - Min. / max. workpiece height: 15 – 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch panel) located at machine infeed at eye level - Chain feed system - Support plate for PVC and ABS edging rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable upper pressure – Teflon-coated glue pot for hot-melt adhesive granulate, capacity 3 kg - Glue application to the workpiece by glue roller - Electronic temperature control, working temperature 180 – 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Joint trimming unit with 2 HM (carbide) jointing cutter heads for pre-trimming before glue application, spindle adjustment vertical, electro-pneumatic control horizontal, 2 motors each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for preheating the panel - Pre-trimming from the roll - 3 solid steel pressure rollers - Top and bottom flush and radius trimming unit with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner copying (profile trimming) unit top and bottom for flush and corner rounding of PVC edges, motor 0.55 kW, 200 Hz, 12,000 rpm - Radius scraper unit with sensing from top, bottom, and side for rounding pre-trimmed PVC edges - Buffing unit for finishing upper and lower edges, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, angle and height adjustable Gbjdpfx Aevz E Tmscyoi - Spray nozzle system (cleaning liquid) - Total connected load: 8.0 kW / 400 V - Extraction port: 4 x Ø 100 mm - Extendable workpiece support - Sound-insulation enclosure with viewing window - Compressed air connection: 6 bar - Machine dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Būklė: naudotas, Gamybos metai: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for up to 100 mm edging height! Condition: factory-checked by Lange Maschinenbau Features and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feeding synchronized with conveyor belt - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber overlay - Digital counter for height adjustment - Direct glue application to the workpiece: drip-free glue pot with glue reservoir from below and fast heat-up time after machine downtime - End trimming unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic trimming with blade for cuttable edges - Flush-milling unit - With vertical tracing and horizontal guidance - Reproducible settings via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - Central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the top milling cutter with the belt feed Gbjdpfxjwka S Ij Acyoi - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable edge tape reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without tape reel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Compact wide belt sander with combination sanding unit Special action equipment: - On/off control of the sanding pad from the operator panel - On/off control of the roller from the operator panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with pushbutton Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front Robust mono-block steel machine body with tubular reinforcement, robot-welded, aggregates mounted high for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first aggregate Rubber pressure rollers, in front of and behind each sanding unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Universally usable for solid wood and veneer, thanks to the combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite insert Universal design for calibration and sanding of solid wood, particleboard, and veneer Technical data Product length approx.: 1388 mm Product height approx.: 1668 mm Product width/depth approx.: 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V Current type: AC Phase(s): 3Ph Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW Height adjustment motor power: 0.25 kW Drive motor power: 7.5kW Sanding unit Sanding belt length: 1525 mm Maximum sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Gbedogf Sw Nepfx Acysi Workpiece height min.: 4 mm Workpiece height max.: 170 mm

Būklė: naudotas, Gamybos metai: 2001, Atmušos pločio: 4000 mm Atmušos aukštis: 1000 mm Išoriniai matmenys: 4600 x 1500 mm 2 x 1,5 kW varikliai Bendra nominali oro srauto apimtis: 7000 m³/h Ištraukimo jungtys dešinėje ir kairėje, 300 mm skersmens Sandėliavimo vieta: Garbsen Gsdsvvizkopfx Acysbi

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 4 200 mm, padavimo eiga Y ašimi: 1 600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Paruošta 1 pagrindiniam velenui su klijavimo grupe, sumontuota dešinėje portalo sijos pusėje. Pagrindinis 5 ašių velenas, 12 kW Gręžimo galvutė su 31 velenu: 21 vertikaliu ir 10 horizontalių 90° pakreipiama griovelių pjūklas 60 mm briaunos nupūtimo antgalis Žiedinė įrankių saugykla 32 HSKF63 įrankiams Linijinis įrankių sandėlis 8 pozicijoms Žiedinė įrankių sandėlis 10 pozicijų Klijavimo grupė Power Edge Pro Duo Apsaugos valdymas su buferiais Godpfxsx Irzce Acysbi Drožlių transporterio juosta Vakuuminis siurblys Valdymo programinė įranga PowerTouch, WoodWop

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2650x640x1400 mm Weight: 700 kg Total power requirement: 5 kW Edgebanding Machine KANTOMAX BASIC Gbodpfx Aevz E T Hocyji - Min. / Max. edge thickness: 0.4 - 3 mm - Min. / Max. edge height: 15 - 55 mm - Min. / Max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed drive motor: 1.1 kW - Feed speed: 12 m/min - Operator panel at infeed in eye level - Chain feed system - Support plate for PVC and ABS edge banding - Pressure zone with pneumatically operated main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable top pressure - Glue pot with Teflon coating for hot-melt adhesive granulate - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic roller guillotine - Pneumatic cylinder for workpiece spacing - Trimming saw unit for front and rear edge overhang. High-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull saw cut for high accuracy - Flush and radius milling unit upper and lower with vertical and horizontal tracing, 2 motors, each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with upper, lower, and lateral tracing for rounding pre-milled PVC edges - Buffing unit for finishing edges top and bottom, 2 motors, each 0.18 kW, 50 Hz, 1400 rpm, height-adjustable - Total power consumption: 5.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Noise reduction enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1820 x 585 x 1450 mm Weight: 500 kg Total power requirement: 4 kW Edge banding machine KANTOMAX EASY - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 48 mm - Min./max. workpiece thickness: 12 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 120 mm - Feed motor: 1.1 kW - Feed speed: 8 m/min - Control panel at machine infeed, positioned at eye level - Chain feed - Support plate for PVC and ABS edging material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for optimum glue joint compression - Central, adjustable top pressure - Glue pot with Teflon coating for hot-melt adhesive granulate - Glue application to workpiece via glue roller - Electronic temperature control, operating temperature 180 – 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Trimming saw unit for front and rear edge overhangs, high-precision linear guide, motor 0.5 kW, 200 Hz, 12,000 rpm, pulling cut for high accuracy - Top and bottom flush and radius trimming unit with vertical and horizontal tracing, each with 0.5 kW motor, 200 Hz, 12,000 rpm - Buffing unit for smoothing upper and lower edges, two motors each 0.18 kW, 50 Hz, 1400 rpm - Total power consumption: 4.0 kW / 400 V - Extraction connection Ø 100 mm - Extendable workpiece support Gedpfx Aovz Hd Hscyjbi - Sound-insulating enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L = 1820 mm, W = 585 mm, H = 1450 mm - Weight: 500 kg