Praeinamas, optimizuotas akumuliatorių testavimui

Weiss Klimaprüfkammer WK 10/40-80 V= ca.10 m³

Gamybos metai: 2019, būklė: geras (naudotas), Weiss Type: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular climatic test chamber Weiss WK 10/40-80 Configuration: Water-cooled refrigeration unit Refrigerant type: R449A Special equipment for battery testing: This climatic test chamber is equipped with advanced safety features for battery and accumulator testing (e.g., lithium-ion): • Pressure relief flap for controlled pressure release in the event of a malfunction • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators These features significantly enhance safety during battery tests and support operation in development and testing environments (taking into account the customer’s own safety concept / BMS). Description: For sale is a professional climatic test chamber from Weiss Technik, Type WK 10/40-80, year built 2019. The unit is used for temperature and climate testing and is ideal for application in industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: - Functional and endurance testing - Material and component testing - Pre-aging and climate simulation - Sample conditioning - Testing of batteries and accumulators (e.g. lithium-ion) under defined climatic conditions (with corresponding customer-side safety concept / BMS) Operation via a modern S!MPAC® controller with web panel; programs can be saved and run automatically. The system was in use until recently and is fully functional. General: Manufacturer: Weiss Umwelttechnik GmbH Type: WK 10/40-80 Year of construction: 2019 Condition: used, operational CE marking: available Made in Germany Control system: S!MPAC® controller Web panel / touch operation Program and time control possible Bedpfx Afsyyu Rqsnjda Temperature & climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10 % to 95 % r.h. Humidity accuracy: ± 5 % Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Test chamber volume approx. 10 m³ Media & systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Power supply: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climatic test chamber Weiss Technik WK 10/40-80 Controller / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see photo) (Specifications and details may be subject to change and error!) For further questions, feel free to contact us by phone.

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ESS B2 - *M 0--.10*, Star screen for screening, for example, soil, compost, wood chips, etc. Bsdpjirnrpofx Afnsda Weight: 2,700 kg. Adjustable particle size from 12 to 40 mm. Connection: 3-phase 400 V, current 32 A, frequency 50 Hz, total power 11.25 kW. Throughput from 40 to 60 m³/h depending on material and particle size. Delivery time approx. 14 weeks after order confirmation.

Gamybos metai: 2024, veikimo valandos: 4 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2,5TMNI, Universal Testing Machine H 2.5 TMNI L Please always include your email address with your inquiry. Mechanical Construction: Single-spindle universal testing machine with backlash-free ball screw in C-frame design, featuring spindle guard and brushless drive motor, Fmax = 2.5 kN 1 test space up to rated load: Test space depth: 105 mm Maximum test stroke without test tools, adapters, and KMZ: 1375 mm Maximum test space height (between lower fixed and moving crosshead) without test tools, adapters, and KMZ: 1375 mm Travel Speeds: Testing speed 0.005 - 1200 mm/min up to rated load Return speed 1200 mm/min Bdjdpfxemdn Trj Afnja Force Measurement: Measuring range depending on the force sensor used: 0.4 - 100% of the rated load, Class 1 (optional Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time: between +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site at the customer's request, this effort will be charged separately. Crosshead Travel Measurement: Incremental square signal input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Būklė: geras (naudotas), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Tests Specifications: Test Chamber Volume: approx. 1000 L Test Chamber Dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door Opening Dimensions (W x H): 1300 x 680 mm External Housing Dimensions (WxDxH): 2162 x 995 x 2080 mm Operating Temperature Range: 5°C above ambient up to +80°C High-load version for a maximum load capacity up to 350 kg Bdsdst Igc Sjpfx Afnoa Process Control: Beckhoff PLC, Color Touchscreen Display, 50 memory slots for test procedures, 50 memory slots for test segments, Ramps: humidity-temperature across the entire working range, Ethernet interface Electrical Connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, 3/4" tap connection, external thread for connection of an ion exchange cartridge Compressed Air: 7-8 bar Waste Water: Siphon / 30 mm ID hose nozzle Exhaust Air: pipe end OD 75 mm Operating modes: Salt spray (fog) Condensed water (CWC) Ambient air ventilation Hot air Controlled humidity

Gamybos metai: 2023, veikimo valandos: 5 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Universal Testing Machine H5TMCI, 250mm Extended Mechanical Design: 2 backlash-free ball screws, driven by AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 test space up to nominal load: Test space width: 420 mm (optional extensions: +190mm / +330mm / +620mm) Maximum test stroke without fixtures, adapters, and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optionally: Conversion to floor-standing model possible, required additional module: base table Travel Speeds: Bedpfjmdpafex Afnoda Testing speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force Measurement: Measurement range: within 0.4 - 100% of nominal load, Class 1 (optional Class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) Force measurement resolution: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If the customer requests on-site factory or DKD calibration, this will be billed separately. Crosshead Travel Measurement: Incremental square wave input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), Weiss Model: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor loading: Designed for a maximum payload of 250 kg Key data for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating: 25 K/min Cooling: 25 K/min (down to -45°C) Heat compensation: max. 8000 W Key data for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98 % RH (relative humidity) Climate performance data (excerpt) Humidity range: 10 to 98 % RH Humidity deviation (over time): At the center of usable space, in steady state, depending on the set point: ±1 to ±3 % RH Temperature deviation (over time): At the center of usable space, in steady state, depending on temperature: ±0.1 to ±0.3 K Temperature homogeneity (spatial): Referring to the set value (for ranges > 20 % RH): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Bodpew R Rt Iofx Afnjda Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode Weight: approx. 2050 kg For your safety as a buyer, the following information: The following points are performed on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All details are without guarantee!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Type: Weiss WT3-340/70 Very good condition Weiss temperature chamber with S!MCON / 32 control, air-cooled (Refrigerant R-404A; conversion to R452A available upon request) Test chamber volume: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating Data: Bdedpfx Aev Edd Sofnja Test chamber illumination: 24V, 50W halogen bulb Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated current: 12.5 A, Rated power: 4.1 kW Customer-side fuse: 16 A slow-blow Sound pressure level approx.: Measured at 1m distance from front, 1m height: 58 dB(A) Temperature Testing Data: Temperature range: -72 to +180 °C Temporal temperature deviation in usable volume center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If needed, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo documented trial operation with calibrated measuring devices. Condition: Used / very good condition

Būklė: labai geros būklės (naudotas), Weiss Bsdpfx Afev Sr Hzoneda Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: "Touch Panel" All control and operating commands can be executed by simply touching the functional icons on the "Touch Panel" control unit. Adjustable Feet To compensate for uneven floors and to ensure adequate ventilation of the machine compartment, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: Right (R1): nominal width 125 mm Left (L1): nominal width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.H. Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity (spatial): ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% r.H. Operating Data: Test chamber lighting: Halogen bulbs 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Fuse (on-site): 16 A slow-blow Refrigerants: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional verification and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Modifications and errors in technical data are subject to change!) We will be happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Binder incubator. Key Features Model BD 115 | Standard incubator with natural convection Technical Data BD 115 External Dimensions: Net width: 835 mm Overall height (incl. feet/casters): 705 mm Net depth: 645 mm Overall depth (incl. door handle and exhaust tube): 750 mm Minimum rear wall clearance: 100 mm Minimum lateral wall clearance: 160 mm Exhaust tube, external diameter: 52 mm Doors: Number of doors: 1 Internal Dimensions: Width: 600 mm Height: 480 mm Depth: 400 mm Internal volume: 115 liters Steam chamber volume: 142 liters Shelves: Number of shelves included: 0 Maximum number of shelves: 5 Maximum load per shelf: 20 kg Permissible total load: 50 kg Weight: Empty weight: 61 kg Temperature Data: Temperature range: 5°C above ambient to 100°C Temporal temperature fluctuation: at 37°C: ± 0.1 K at 50°C: ± 0.1 K Spatial temperature deviation: at 37°C: ± 0.4 K at 50°C: ± 0.8 K Heating-up time: to 37°C: 70 minutes to 50°C: 90 minutes Recovery time after door opened for 30 s: Bdjdpfoqzx Nnjx Afnea at 37°C: 10 minutes at 50°C: 12 minutes Electrical Data: BD115-230V IP 20 Nominal voltage (+/-10%) at 50 Hz: 230 V Nominal voltage (+/-10%) at 60 Hz: 230 V Current type: 1N~ Nominal power: 0.20 kW Type: BD 115 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For any further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Bedpfxsw Hz Tro Afnsda Test chamber volume: 450 liters Maximum load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Fields of application: Corrosion testing: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability: The temporal temperature deviation is ±K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard atmosphere (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See image) (Specifications and data may be subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.