Paleisti

WEINIG UNIPLAN

Sąlyga: naudotas, Gamybos metai: 2005, Unimat 23 E: Working width (with cutter block diameter 140 mm): 20 – 230 mm Working height (with cutter block diameter 163 mm): 8 - 120 mm 1st spindle, lower horizontal spindle: 7.5 kW 2nd spindle, right vertical spindle: 11 kW (shared with left vertical spindle) 3rd spindle, left vertical spindle 4th spindle, upper horizontal spindle: 7.5 kW Each spindle diameter: 50 mm Each speed: 8,000 rpm Feed system: 4 kW Mechanically adjustable feed, stepless: 5-24 m/min. Worktable 2.5 m long (incl. jointing fence) Dsdpfevvkciex Ab Seul Uniplan 23: Maximum working width: 230 mm Minimum / maximum working height: 15 mm / 120 mm Feed: 3 kW Horizontal spindles each 5.5 kW Feed speed, stepless: 6 – 36 m/min. Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool diameter: 163 mm Fixed bottom chip removal: 0.5 mm Short-piece package for minimum wood length: 280 mm Mechanical spindle brakes up to 7.5 kW Brake system for feed up to 5.5 kW 1st feed roller synchronized with photo cell - spindle speed 7,200 rpm, incl. motor power 7.5 kW. - Improved sound insulation for the full safety enclosure. Location: Customer

Sąlyga: naujas, Working width (finished dimension) 23 – 180 mm Working height (finished dimension) 6 – 105 mm Min. length of individual workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindle 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Dsdpfx Abjiiv Dcs Seul Profile capacity without axial adjustment on vertical spindle 10 mm Loose roller integrated in outfeed table Extraction diameter 4 x 120 mm Including OPTIONS - Motor-driven feed roller before the jointer with lever for quick adjustment - Front vertical pressure unit before the left vertical spindle - Infeed table length 2300 mm - Tool package consisting of 4 planing heads and one edge-jointing cutter

Sąlyga: naudotas, Available: No. 1 and No. 2 Dsdpfxot Snzwe Ab Seul Used control cabinet from a Weinig Uniplan, suitable as a source for spare parts or for constructing a new control cabinet with operator panel.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with individual 7.5 kW motor and spindle brake Speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled down to 35 mm height 3. Left spindle with individual 7.5 kW motor, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure fence on left side for workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic control, axial adjustment range 40 mm, glazing bead removal, pneumatically actuated. - Feed system with 4 kW motor and feed brake - Short-piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operator panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic dressing and feeding system for varying workpiece lengths and widths Workpiece dimensions: Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Dujdpfx Abewyuluo Ssl Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Finish Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First infeed roller sequenced with photoelectric sensors - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 Hydro straight-knife cutterheads 501 with HSS planer knives 30 mm x 3 mm, max. 9,000 rpm, dim. 163 mm x 230 mm x 50 mm, Z=4

Gamybos metai: 1985, Sąlyga: geras (naudotas), COMPLETE PAINTING LINE WITH THE FOLLOWING STATIONS: 1. COATER FOR WATER-BASED PRIMER 2. OVEN WITH UV + IR LAMPS 3. DOUBLE COATER WITH REVERSE SYSTEM 4. UV LAMPS 5. DOUBLE COATER 6. UV LAMPS 7. DMC SANDER 8. CONVEYOR 9. SORBINI TOUCH-UP STAIN COATER 10. IR LAMPS 11. FINISHING ROLLER 12. UV LAMPS Dedpfx Aok Scufjb Seul 13. OUTFEED CONVEYOR

Gamybos metai: 1995, Sąlyga: geras (naudotas), planing width: 220 mm planing height: 140 mm maximum tool diameter: 160 mm main motors: 2 x 5.5 kW feed motor: 3 kW feed speed: 6 – 36 m/min - inverter controlled feed via cardan shafts cutterheads supported on both sides electric height adjustment Dedpeg E Uqcefx Ab Ssul

Sąlyga: naudotas, Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 pcs. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory-overhauled by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter bearings, without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remote-controlled with the hood closed. Machine features a continuous, chainless feed unit equipped with rubber rollers. Electric vertical adjustment of the spindles via mechanical digital display (SIKO). Switch for limiting the height adjustment range. Feed roller pressure is pneumatic. Stops and table plates are fixed (not adjustable). Machine has steel table plates. Machine with full enclosure and integrated sound and dust protection, including internal lighting. Electrical configuration according to DIN VDE 0113, electrical equipment for industrial machinery EN 60204, IEC - 204 - 1. Additional electrical standards are not considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before use whether your existing tools are suitable for this speed. Please also keep this in mind when ordering new tools. Technical data Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Horizontal spindle motors each: 7.5 kW (7.5 HP) Feed speed, stepless: 6–36 m/min Dujdpfsxpn Tzex Ab Sol Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed clamping removal bottom: 0.5 mm (Technical data according to manufacturer – subject to change without notice!)

Sąlyga: naudotas, Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: KME 2/750L, Clamping carriage for saw frame Dedpfx Absv Umb Ee Seul Inspection by appointment is gladly possible.

Sąlyga: labai geros būklės (naudotas), Double-sided planer Weinig Uniplan Planing width: 220 mm Planing height: 15–120 mm Horizontal spindle power: 2 x 5.5 kW Spindle speed: 6,000 rpm Dodpjrxuvqofx Ab Seul Spindle diameter: 50 mm Spindles supported on both sides Feed speed: 6–32 m/min Feed motor: 3 kW

Sąlyga: naudotas, Weinig Unimat 23 E + Uniplan 23 obliavimo linija su grąžinimo konvejeriu. NC valdoma linija langų ruošiniams obliuoti ir profiliuoti, įskaitant stiklo tašų išpjovimą ar kitus obliavimo darbus su automatiniu ruošinių grąžinimu operatoriui. Velenai: 4 + 2 Darbinis plotis: 230 mm Dusdpfx Abex An R Te Sel Darbinis aukštis: 120 mm 1 velenas: 7,5 kW / 50 mm / 8 000 aps./min. 2 velenas: 11 kW / 50 mm / 8 000 aps./min. 3 velenas: bendras variklis su 2-uoju velenu / 50 mm / 8 000 aps./min. 4 velenas: 7,5 kW / 50 mm / 8 000 aps./min. 1 Uniplan velenas: 5,5 kW / 50 mm / 7 200 aps./min. 2 Uniplan velenas: 5,5 kW / 50 mm / 7 200 aps./min. Padavimas: 5–24 m/min. Valdymas: Nexus PC valdymas NC ašys: Unimat 2 ir 3, Uniplan 1

Sąlyga: naudotas, Obliavimo ir profiliavimo automatas Weinig Powermat 700 skirtas medienos keturpusiam obliavimui ir profiliavimui su CNC valdymu. Prieinamas pagal susitarimą nuo 2026 m. kovo mėn. Įrenginio pardavimas galimas tik su sąlyga, jei bus realizuota briketavimo presas (ref. Nr. 800055) arba visas obliavimo cechas (ref. Nr. 100101). Velenų skaičius: 6 Velenas 1: apačioje / 7,5 kW / 6 000 aps./min. Velenas 2: dešinėje / 15 kW / 8 000 aps./min. Duedpexpuufefx Ab Sjl Velenas 3: kairėje / bendras variklis su #2 / 8 000 aps./min. Velenas 4: viršuje / 11 kW / 8 000 aps./min. Velenas 5: viršuje / 7,5 kW / 8 000 aps./min. Velenas 6: apačioje / 7,5 kW / 8 000 aps./min. Darbinis plotis: 230 mm Darbinis aukštis: 160 mm Veleno skersmuo: 40 mm Padavimas: 40 m/min / 5 kW Nivelyrinio stalo ilgis: 1 200 mm Valdymas: Memory Plus

Sąlyga: naudotas, Velenų skaičius: 8 vnt. Dsdpfoxpn Tujx Ab Seul Darbo plotis: 230 mm Obliavimo aukštis: 120 mm Weinig obliavimo linija ----- Sudaryta iš šių atskirų mašinų: Poz. 1: Weinig Profimat 23 E, keturpusė obliavimo staklės, sandėlio nr. 2803 5 velenai + stiklo briaunų pjūklas Poz. 2: Weinig Uniplan 23, sandėlio nr. 2804 Baigiamojo ir hidroobliavimo staklės su 2 horizontaliais velenais Poz. 3: Weinig RF 15, sandėlio nr. 2805 Išilginis-skersinis-išilginis konvejeris su ruošinio grąžinimu operatoriui Išsamūs mašinų aprašymai pateikiami nurodytais sandėlio numeriais. (Techninė informacija pagal gamintoją, be garantijos!)

Sąlyga: naudotas, Hydro precision planing machine Weinig Uniplan 23 for double-sided surface finishing, as an alternative to sanding (e.g. in window production), equipped with high-performance spindles. - In very good original condition Number of spindles: 2 Spindle configuration: Bottom (7.5 kW) – Top (7.5 kW) Working width: 230 mm Working height: 120 mm Spindle diameter: 50 mm Feed drive: 3 kW // max. 36 m/min Dedpfx Abst Rmbmo Sjul Spindle speed: 7,200 rpm Jointer: Yes Counter bearing: Yes Short workpiece package: Yes

Sąlyga: visiškai atnaujintas (naudotas), - Manufacture year 2007completely overhauled - BONGIOANNI variable cut axis system - 5 headlocks - 4 log turners - New control unit - New feed system - New electric cabinet/control SPS - Frame and rail system - Pantograph - New drive nom. 44kW Duodotta I Eopfx Ab Sjl