Formier

Weinig Uniplan

Sąlyga: naudotas, Available: No. 1 and No. 2 Ibjdjt Snzwopfx Abkjf Used control cabinet from a Weinig Uniplan, suitable as a source for spare parts or for constructing a new control cabinet with operator panel.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Briquetting press machine, automatic, hydraulic model POR STANDARD Used machine Condition: Excellent Briquette cutting system Hydraulic machine Ibodpow E Iyiofx Abkof CE marking: Yes Hourly output: 60 / 90 kg/h Hydraulic pump motor: 7.5 HP Briquette diameter: 65 mm Maximum briquette length: 50–300 mm Voltage: 380V / 50 Hz Net weight: 800 kg Overall dimensions: 195 x 110 x 150 cm (H)

Sąlyga: naudotas, Gamybos metai: 2005, Unimat 23 E: Working width (with cutter block diameter 140 mm): 20 – 230 mm Working height (with cutter block diameter 163 mm): 8 - 120 mm 1st spindle, lower horizontal spindle: 7.5 kW 2nd spindle, right vertical spindle: 11 kW (shared with left vertical spindle) 3rd spindle, left vertical spindle 4th spindle, upper horizontal spindle: 7.5 kW Each spindle diameter: 50 mm Each speed: 8,000 rpm Feed system: 4 kW Mechanically adjustable feed, stepless: 5-24 m/min. Worktable 2.5 m long (incl. jointing fence) Ibodpjvvkciefx Abkof Uniplan 23: Maximum working width: 230 mm Minimum / maximum working height: 15 mm / 120 mm Feed: 3 kW Horizontal spindles each 5.5 kW Feed speed, stepless: 6 – 36 m/min. Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool diameter: 163 mm Fixed bottom chip removal: 0.5 mm Short-piece package for minimum wood length: 280 mm Mechanical spindle brakes up to 7.5 kW Brake system for feed up to 5.5 kW 1st feed roller synchronized with photo cell - spindle speed 7,200 rpm, incl. motor power 7.5 kW. - Improved sound insulation for the full safety enclosure. Location: Customer

Sąlyga: geras (naudotas), Gamybos metai: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with individual 7.5 kW motor and spindle brake Speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled down to 35 mm height 3. Left spindle with individual 7.5 kW motor, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure fence on left side for workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic control, axial adjustment range 40 mm, glazing bead removal, pneumatically actuated. - Feed system with 4 kW motor and feed brake - Short-piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operator panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic dressing and feeding system for varying workpiece lengths and widths Workpiece dimensions: Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Finish Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First infeed roller sequenced with photoelectric sensors - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package Ibedswyulujpfx Abkef - 2 Hydro straight-knife cutterheads 501 with HSS planer knives 30 mm x 3 mm, max. 9,000 rpm, dim. 163 mm x 230 mm x 50 mm, Z=4

Gamybos metai: 2022, veikimo valandos: 20 h, Sąlyga: beveik kaip naujas (parodų įrenginys),

Gamybos metai: 1995, Sąlyga: geras (naudotas), planing width: 220 mm Ibjdpog E Uqcjfx Abkjf planing height: 140 mm maximum tool diameter: 160 mm main motors: 2 x 5.5 kW feed motor: 3 kW feed speed: 6 – 36 m/min - inverter controlled feed via cardan shafts cutterheads supported on both sides electric height adjustment

Sąlyga: naudotas, Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 pcs. Iedpfxexpn Tzj Abkebf Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory-overhauled by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter bearings, without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remote-controlled with the hood closed. Machine features a continuous, chainless feed unit equipped with rubber rollers. Electric vertical adjustment of the spindles via mechanical digital display (SIKO). Switch for limiting the height adjustment range. Feed roller pressure is pneumatic. Stops and table plates are fixed (not adjustable). Machine has steel table plates. Machine with full enclosure and integrated sound and dust protection, including internal lighting. Electrical configuration according to DIN VDE 0113, electrical equipment for industrial machinery EN 60204, IEC - 204 - 1. Additional electrical standards are not considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before use whether your existing tools are suitable for this speed. Please also keep this in mind when ordering new tools. Technical data Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Horizontal spindle motors each: 7.5 kW (7.5 HP) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed clamping removal bottom: 0.5 mm (Technical data according to manufacturer – subject to change without notice!)

Sąlyga: geras (naudotas), Gamybos metai: 1991, Braun Canali band saw, model TB 1100 Unimaster, wheel diameter 1100 mm, with tilting table for diagonal cuts. Machine dismantled, available from our warehouse in 23936 Grevesmühlen. Ibsdpfx Aboucnt Hoksf

Sąlyga: labai geros būklės (naudotas), Dvipusis frezavimo staklės WEINIG uniplan Iedpfx Aot Uh Dqebkebf

Sąlyga: naudotas, Weinig Unimat 23 E + Uniplan 23 obliavimo linija su grąžinimo konvejeriu. NC valdoma linija langų ruošiniams obliuoti ir profiliuoti, įskaitant stiklo tašų išpjovimą ar kitus obliavimo darbus su automatiniu ruošinių grąžinimu operatoriui. Velenai: 4 + 2 Darbinis plotis: 230 mm Darbinis aukštis: 120 mm 1 velenas: 7,5 kW / 50 mm / 8 000 aps./min. 2 velenas: 11 kW / 50 mm / 8 000 aps./min. 3 velenas: bendras variklis su 2-uoju velenu / 50 mm / 8 000 aps./min. Isdex An R Tjpfx Abkjbf 4 velenas: 7,5 kW / 50 mm / 8 000 aps./min. 1 Uniplan velenas: 5,5 kW / 50 mm / 7 200 aps./min. 2 Uniplan velenas: 5,5 kW / 50 mm / 7 200 aps./min. Padavimas: 5–24 m/min. Valdymas: Nexus PC valdymas NC ašys: Unimat 2 ir 3, Uniplan 1

Gamybos metai: 1990, Sąlyga: geras (naudotas), Used sideloader Kalmar, the machine has been well maintained For more details, see pictures Ibedpfoh Et E Nex Abksf

Sąlyga: naudotas, Velenų skaičius: 8 vnt. Darbo plotis: 230 mm Obliavimo aukštis: 120 mm Weinig obliavimo linija ----- Sudaryta iš šių atskirų mašinų: Poz. 1: Weinig Profimat 23 E, keturpusė obliavimo staklės, sandėlio nr. 2803 5 velenai + stiklo briaunų pjūklas Poz. 2: Weinig Uniplan 23, sandėlio nr. 2804 Baigiamojo ir hidroobliavimo staklės su 2 horizontaliais velenais Poz. 3: Weinig RF 15, sandėlio nr. 2805 Ibsdpfxexpn Tus Abksf Išilginis-skersinis-išilginis konvejeris su ruošinio grąžinimu operatoriui Išsamūs mašinų aprašymai pateikiami nurodytais sandėlio numeriais. (Techninė informacija pagal gamintoją, be garantijos!)

Sąlyga: naudotas, Hydro precision planing machine Weinig Uniplan 23 for double-sided surface finishing, as an alternative to sanding (e.g. in window production), equipped with high-performance spindles. - In very good original condition Number of spindles: 2 Spindle configuration: Bottom (7.5 kW) – Top (7.5 kW) Working width: 230 mm Working height: 120 mm Spindle diameter: 50 mm Feed drive: 3 kW // max. 36 m/min Spindle speed: 7,200 rpm Jointer: Yes Counter bearing: Yes Ibedpet Rmbmofx Abksf Short workpiece package: Yes

Sąlyga: naudotas, Gamybos metai: 1997, 3 linijos Stenner MHS9 staklės iš 1997 metų Ibodow Nrhkspfx Abksf