Frezavimo staklė

Weinig Unimat 23

Būklė: naudotas, Gamybos metai: 1995, ruošinio plotis (maks.): 230 mm, įėjimo įtampa: 400 V, stalo ilgis: 1 500 mm, ašies skaičius: 8, Įranga: kabina, Weinig Unimat 23e obliavimo staklės (8 velenų) Aprašymas: Pagaminimo metai: 1995 Įleidžiamojo stalo matmenys: 1500 mm Redpfx Aeyx Tiiohgew Ašių skaičius: 8 Velenų seka: apačia-dešinė-kairė-dešinė-viršus-apačia-viršus-apačia Judantis velenas: Ne Obliavimo plotis: 20 / 230 mm Obliavimo aukštis: 12 / 120 mm Praėjimo greitis: 6-24 m/min Juostos griovelis: Nėra (Visi pakeitimai, techninių duomenų, informacijos ar kainų netikslumai galimi. Prekės prieinamumas gali keistis be išankstinio perspėjimo. Už spausdintus duomenis negarantuojame!) Geriausios medžio apdirbimo staklės iš Olandijos

Būklė: labai geros būklės (naudotas), WEINIG Hydromat H23 Line, S/N 87321, Year of manufacture 1999, Ref. No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed: 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/brake combos Redpfx Aswvqklshgow • Pneumatically supported pressure rollers from above • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1, 6, 7, 8, 9 with counter bearings • Spindles 8 & 9 with straight jointer • Spindles 8 & 9 with profile jointer • Spindles 6 & 8 with pneumatic pressure • Reduced roller pitch on feed system • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported lateral pressure rollers • Automatic table lubrication • Central lubrication points • Freestanding operating panel • Total connected load approx. 145 kW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without planer heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors fitted with NEW bearings NEW electronic motor soft start / braking devices NEW hard-chromed table plates NEW hard-chromed fences Many additional NEW PARTS fitted in the machine Condition: See attached photos – technically in first-class condition Infeed mechanisation unrefurbished – all parts complete and functional Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Subject to prior sale and errors excepted.

Būklė: naudotas, Gamybos metai: 1998, bendras plotis: 2 220 mm, bendras aukštis: 1 900 mm, Matmenys (I x P x A): 450 x 222 x 190 cm Kaina: pagal užklausą - Pagaminimo metai: 1998 - Dokumentacija prieinama: Ne - CE žymėjimas: Taip - CE sertifikatas: Ne - Serijos numeris: 83929 - Verpstukų skaičius [vnt.]: 5 - └ Verpstukas 1: - Variklio galia [kW]: 7,5 - └ Verpstukas 3: - Variklio galia [kW]: 11 - └ Verpstukas 4: - Variklio galia [kW]: 11 - └ Verpstukas 5: - Variklio galia [kW]: 7,5 - Transporto matmenys: 4500 mm x 2220 mm x 1900 mm (i x p x a) - Transportavimo vienetai [vnt.]: 1 Redpfx Ajxr U Nujhgjw Finansinė informacija PVM: Nurodyta kaina be PVM PVM/Maržos apmokestinimas: PVM atskaitomas verslui Pristatymas ir keitimas visada galimi bet kokiai pramonės įrangai Yorick Diebels

Būklė: naudotas, Vretenų skaičius: 7 vnt. Rodpozf Nr Refx Ahgsw Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Obliavimo ir profiliavimo automatas Weinig Unimat 23, skirtas medienos keturpusiam obliavimui ir profiliavimui, su penkiais varomaisiais volais stalo dalyje ir universaliu velenėliu. Velenėlis 1: apačioje / 5,5 kW / 40 mm Velenėlis 2: dešinėje / 5,5 kW / 40 mm Velenėlis 3: kairėje / 11 kW / 40 mm Velenėlis 4: dešinėje / 7,5 kW / 40 mm Velenėlis 5: viršuje / 11 kW / 40 mm Velenėlis 6: apačioje / 5,5 kW / 40 mm Velenėlis 7: universalus / 5,5 kW / 40 mm

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, vynų diametras: 80 mm, bendras plotis: 1 250 mm, bendras ilgis: 40 750 mm, pervežimo ilgis: 40 750 mm, galia: 1,1 kW (1,50 AG), tarpueilių atstumas: 160 mm, ašių atstumas: 160 mm, rėmo aukštis: 185 mm, rėmo plotis: 85 mm, Pallet Roller Conveyor / Conveyor System / Pallet Conveying Technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive The system consists of 9 segments: 6 x approx. 5.75 m length 1 x approx. 5.30 m length 1 x approx. 2.00 m length 1 x approx. 0.95 m length Each segment is equipped with its own motor. Total length: approx. 40.75 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roller diameter: approx. 80 mm Axles / axle spacing: approx. 160 mm Frame width: approx. 85 mm Redpfx Aetrv Anjhgjw Frame height: approx. 185 mm Color: Blue Including pallet guides Including SEW motor (1.1 kW) Including height-adjustable feet The conveyor system was running until dismantling. Condition: Fully functional, with signs of use Ideal for rapid material handling Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning or installation questions. Just let us know your requirements and site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully completed projects for companies from a wide range of industries, such as logistics, pharmaceutical industry, craft trades or electronics sector. Together, we will develop solutions to optimize your process and material flow efficiently and sustainably. We can also offer fully automated sorting systems or complementary components such as picking racks or containers.

Būklė: naudotas, Gamybos metai: 2004, WEINIG obliavimo automatas Tipas Unimat 23 EL Pagaminimo metai: 2004 Darbinis plotis: 230 mm Darbinis aukštis: 120 mm 1. velenas apačioje 7,5 kW 2. velenas dešinėje 7,5 kW 3. velenas kairėje 7,5 kW 4. velenas viršuje 7,5 kW Padavimo sistema 4 kW Trumpų detalių paketas UC Matic paketas Pagerinta garso izoliacija Automatinė ištiesinimo ir padavimo sistema skirtoms įvairaus ilgio ir pločio ruošiniams -Ruošinio matmenys: Ilgis 400–3500 mm (iki 4000 mm) Plotis 40–200 mm Storis 20–100 mm Rjdjzg D Ebspfx Ahgow

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, working width 230 mm working height 140 mm 5 heads head configuration: bottom/right/left/top/bottom table lubrication system pneumatic feed roller presses two-axis head adjustment spindle speed 6000 rpm Rsdew Afahepfx Ahgsw electric adjustment of the pressure beam feed via cardan shafts variable feed speed heavy-duty soundproof cabin

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left Rjdpeu Agh Sofx Ahgew 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: naudotas, Gamybos metai: 1998, bendras plotis: 2 000 mm, bendras aukštis: 1 800 mm, Color: Grey Unladen weight: 5,000 kg Dimensions (L x W x H): 450 x 200 x 180 cm Four-Sided Planer Weinig Unimat 23 Year of manufacture: 1998 Serial number: 82747 Feed speed: 5/36 m/min Workpiece width min./max.: 20/230 mm Workpiece height min./max.: 8/160 mm Spindle diameter: 40mm Half-moon support table 1st spindle bottom: 7.5 kW 2nd spindle right: 7.5 kW 3rd spindle left: 7.5 kW 4th spindle top: 7.5 kW 5th spindle bottom: 7.5 kW 6th spindle universal: 11 kW Total power: 55 kW Total current: 119 amps Rsdpfx Aewnh D Tshgjw Protection: 125 amps Transport dimensions: 4500 x 2000 x 1800 mm (L x W x H) Weight approx. 5000 kg - Year of manufacture: 1998 - Documentation available: No - CE certificate available: No - Serial number: 82747 - Number of spindles [pcs.]: 6 - Spindle 1: - Spindle type: Bottom - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 2: - Spindle type: Right - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 3: - Spindle type: Left - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 4: - Spindle type: Top - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 5: - Spindle type: Bottom - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 6: - Spindle type: Universal - Motor power [kW]: 11 - Spindle diameter [mm]: 40 - Min. planing width [mm]: 20 - Max. planing width [mm]: 230 - Min. planing height [mm]: 8 - Max. planing height [mm]: 160 - Feed speed: - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 36 - Power consumption [A]: 119 - Fuse [A]: 125 - Power rating [kW]: 55.0 - Transport dimensions: 4500mm x 2000mm x 1800mm (L x W x H) - Transport weight [kg]: 5000kg Financial information VAT: The stated price is plus VAT VAT/regulation: VAT deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Yorick Diebels

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 255 mm, obliavimo aukštis: 160 mm, ašies skersmuo: 40 mm, obliavimo plotis: 255 mm, darbinio aukščio: 160 mm, padavimo variklio galia: 3 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 40 mm, įvesties srovės tipas: trifazis, ašies skaičius: 5, įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) Driven roller in the outfeed table. Rodpfx Asxg Sa Hehgsw

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, Velenų skaičius: 4 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Padavimo variklis: 11 kW Padavimo greitis: 60 m/min. Valdymas: Memory Plus Obliavimo ir profiliavimo automatas Weinig Powermat 2400, skirtas medienos keturpusiam obliavimui ir profiliavimui, su įtraukimo mechanizacija Weinig High Mech E 1 ir ištraukimo mechanizacija su sukamuoju krovimo automatu Sicko. Įrenginys turi Memory Plus sistemą su elektroniniu 3 ir 4 velenų (radialiniu) pozicionavimu ir stalų MarathonPowerCoating PLUS padengimu. Paskutinis techninis aptarnavimas atliktas gamintojo 2025 m. gruodį. Įrenginys vis dar naudojamas ir gali būti apžiūrėtas bet kada. Rjdoyhfhnjpfx Ahgew Numatomas prieinamumas nuo 2026 m. rugsėjo mėn. Velenas 1: apačia / 15 kW / 50 mm / 6.000 aps./min. Velenas 2: dešinė / 15 kW / 50 mm / 6.000 aps./min. Velenas 3: kairė / 15 kW / 50 mm / 6.000 aps./min. Velenas 4: viršus / 18,5 kW / 50 mm / 6.000 aps./min.

Būklė: labai geros būklės (naudotas), Four-side planer Weinig Unimat 23 Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle arrangement: Bottom: 5.5 kW Rodpfetxxwdex Ahgew Right Left: 7.5 kW Top: 11 kW Bottom: 5.5 kW Pneumatic material hold-downs divided into 4 sections Feed speed adjustable via variator: 4–24 m/min Infeed table length: 1980 mm Drive via cardan shafts Heavy-duty soundproof cabin Machine dimensions: 380 x 226 x 178 cm (H) CE certificate

Būklė: labai geros būklės (naudotas), Four-Side Planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Spindle arrangement: Bottom – 5.5 kW Right – 4 kW Left – 5.5 kW Right – 4 kW Rodperb An Usfx Ahgjw Top – 11 kW Bottom – 5.5 kW Top – 7.5 kW Bottom – 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed driven by cardan shaft Table with powered rollers Pneumatic pressure units CE certificate Year of manufacture: 2003

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Four-side planing machine Weinig Profimat 23 Fortec Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Rsdeumxqrjpfx Ahgjw Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certificate

Būklė: naudotas, Gamybos metai: 2001, Velenų skaičius: 6 Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Valdymas: ATS Varomasis stalo volas: 1 Pado greitis: 24 m/min Padavimo variklis: 4 kW Rsdpfx Ajy Uy Uqjhgew Obliaus stalo ilgis: 2 500 mm Weinig Unimat 23 keturpusė obliavimo ir profiliavimo automatinė staklės, skirtos medienos keturpusiam apdirbimui su ATS sistema, sustiprinta Kaschwig triukšmo izoliacijos kabina ir universaliu velenu. Velenas 1: Apačioje / 40 mm / 7,5 kW / 8 000 aps./min Velenas 2: Dešinėje / 40 mm / 7,5 kW / 8 000 aps./min Velenas 3: Kairėje / 40 mm / 7,5 kW / 8 000 aps./min Velenas 4: Viršuje / 40 mm / 7,5 kW / 8 000 aps./min Velenas 5: Apačioje / 40 mm / 7,5 kW / 8 000 aps./min Velenas 6: Universalus / 40 mm / 7,5 kW / 6 000 aps./min