Keturpusės obliavimo staklės

Weinig Unimat 23

Sąlyga: naudotas, Gamybos metai: 1998, Dimensions (L x W x H): 450 x 222 x 190 cm Price: On request - Year of manufacture: 1998 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 83929 - Number of spindles [pcs]: 5 - Spindle 1: - Spindle type: Horizontal spindle - Motor power [kW]: 7.5 - Spindle 2: - Spindle type: Vertical spindle - Spindle 3: - Spindle type: Vertical spindle - Motor power [kW]: 11 - Spindle 4: - Spindle type: Horizontal spindle - Motor power [kW]: 11 - Spindle 5: - Spindle type: Horizontal spindle - Motor power [kW]: 7.5 - Transport dimensions: 4500 mm x 2220 mm x 1900 mm (L x W x H) - Number of transport packages [pcs]: 1 Financial Information VAT: The stated price is exclusive of VAT Bsdpfx Aexr U Nuedmodk VAT/Margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Sąlyga: naujas, Gamybos metai: 2024, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale. Once it’s gone, it’s gone. Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30–40 Bdodpfjlht H Eox Admjk Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and geared motor - Screw channel with discharge auger and geared motor Accessories: - Briquette length monitoring, automatic on/off Location: 54634 Bitburg

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointer table length: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 of which are right-hand), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, bottom, 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 125 - 180 mm Rabbetting unit incl. tooling Hardened table insert in front of 1st bottom spindle 2nd spindle, right, 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. spring-loaded side roller pressure 4th spindle, right, 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle, top, 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool swing diameter and swivelling away from tool, spring-loaded 6th spindle, bottom, 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 112 - 250 mm Bdodjxz Hh Uopfx Admsk Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles - General ----- All profiling spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed steplessly adjustable 5–24 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled high/low Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Feed roller adjustment relative to left spindle, axial 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380 - 420 Volt), 50 Hz Machine base, tables, and fences ----- Jointer table 2.0 m long (incl. straight edge) Manual Waxilit pump for table de-resining One powered rubber roller (spring-loaded in outfeed table) Two powered rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital indicator Ejection after top spindle with mechanical digital indicator ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points located at machine front Electronic digital displays at spindle 3 and 5 (axial), spindle 6 (radial), and spindle 4 (axial and radial) Safety and sound insulation ----- Full safety enclosure Easily high...

Sąlyga: geras (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 230 mm, obliavimo aukštis: 170 mm, ašies skersmuo: 50 mm, obliavimo plotis: 230 mm, darbinio aukščio: 170 mm, padavimo variklio galia: 7 500 W, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 50 mm, ašies skaičius: 8, įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, 8 spindles, working width: 230 mm, working height: 180 mm, spindle diameter: 50 mm, feed: 7.5 kW / 6–36 m/min, Bsdpsr Axwnjfx Admjdk spindle configuration: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-right (11 kW) 4-left (11 kW) 5-top (11.0 kW) 6-bottom (22.0 kW) 7-bottom (7.5 kW) 8-top (7.5 kW) 8 powered rollers in the table

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm Bdedpevnv Uzsfx Admek 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naudotas, Gamybos metai: 2005, *Available from approx. mid-2025* Unimat 23 E: Working width (with a tooling circle of 140 mm): 20 – 230 mm Working height (with a tooling circle of 163 mm): 8 – 120 mm 1st spindle lower horizontal spindle: 7.5 kW 2nd spindle right vertical spindle: 11 kW (shared with left vertical spindle) 3rd spindle left vertical spindle 4th spindle upper horizontal spindle: 7.5 kW Spindle diameter each: 50 mm Spindle speed each: 8,000 rpm Feed system: 4 kW mechanical feed, infinitely variable: 5–24 m/min Work table length: 2.5 m (including jointing fence) Uniplan 23: Max. working width: 230 mm Min. working height: 15 mm / Max.: 120 mm Feed: 3 kW Horizontal spindles each 5.5 kW Feed speed, infinitely variable: 6 – 36 m/min Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed chip removal bottom: 0.5 mm Bsdpfxevvkcij Admedk Short timber package for min. wood length: 280 mm Mechanical spindle brakes up to 7.5 kW Brake system for feed up to 5.5 kW 1st infeed roller synchronized with photocell -Spindle speed 7,200 rpm, incl. motor power 7.5 kW. -Enhanced sound insulation of the full safety enclosure. Location: Customer

Sąlyga: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, ašies skersmuo: 40 mm, darbinis plotis: 230 mm, X ašies padavimo greitis: 5 m/min, Y ašies padavimo greitis: 36 m/min, obliavimo plotis: 20 mm, aukščio reguliavimo tipas: elektrinis, obliavimo aukštis: 160 mm, darbinio aukščio: 8 mm, Įranga: kabina, variklio stabdis, Weinig Unimat 23 E 6-galvos obliavimo-frezavimo staklės. Apatinė galva – 10 AG Tvoros ir artima galva – 15 AG (bendras variklis) Pirmoji viršutinė galva – 15 AG Bdodov A Rpcepfx Admok Antroji viršutinė galva – 15 AG Antroji apatinė galva – 10 AG Veleno greitis – 6000 aps./min. Padavimo greitis – min/5 m/min, maks/36 m/min Darbinis plotis – min 20 mm, maks 230 mm Darbinis aukštis – min 8 mm, maks 160 mm Veleno skersmuo – 40 mm Įrenginys šiuo metu vis dar eksploatuojamas, apžiūra galima ir laukiama.

Sąlyga: naudotas, Gamybos metai: 2006, Gamintojas: Weinig Modelis: Unimat Super 4 Pagaminimo metai: 2006 Keturių pusių obliavimo staklės Gamintojas: WEINIG, restauruotos Bedpfxoqprk Tj Admedk Modelis: UNIMAT SUPER 4 su trumpų ruošinių mechanizacija EM15 - Pagaminimo metai: 2006 Techninės specifikacijos - Darbinis plotis: maks. 150 mm - Darbinis plotis: min. 25 mm - Darbinis aukštis: maks. 50 mm - Darbinis aukštis: min. 15 mm - Velenų skaičius: 3 - Viršutinio veleno galia: 22 kW - Apatinio veleno galia: 11 kW - Velenų apsisukimų skaičius: maks. 7.000 aps./min - Veleno skersmuo: 40 mm - Stalo ilgis: 2.000 mm - Maks. padavimo greitis: 24 m/min - Nuolatinis padavimo greičio reguliavimas - Atskiras variklis kiekvienam velenui - Padavimo volas su kardanine pavara - Padavimas iš žurnalo - Motorizuotas obliavimo aukščio reguliavimas - Automatinė tepimo pompa - WEINIG veidinio frezavimo galvutė - WEINIG EM 15 - Bendra galia: 45 kW

Sąlyga: geras (naudotas), Gamybos metai: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with individual 7.5 kW motor and spindle brake Speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled down to 35 mm height 3. Left spindle with individual 7.5 kW motor, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure fence on left side for workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic control, axial adjustment range 40 mm, glazing bead removal, pneumatically actuated. - Feed system with 4 kW motor and feed brake - Short-piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operator panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic dressing and feeding system for varying workpiece lengths and widths Workpiece dimensions: Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Finish Planer Uniplan 23 Year of manufacture: 2004 Bdjdpfewyulusx Admjk Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First infeed roller sequenced with photoelectric sensors - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 Hydro straight-knife cutterheads 501 with HSS planer knives 30 mm x 3 mm, max. 9,000 rpm, dim. 163 mm x 230 mm x 50 mm, Z=4

Sąlyga: naudotas, Gamybos metai: 1998, Unladen weight: 5,000 kg Dimensions (L x W x H): 450 x 200 x 180 cm Price: On request Bjdpfjwnh D Tsx Admodk Four-Side Planer Weinig Unimat 23 Year of manufacture: 1998 Serial number: 82747 Feed speed: 5/36 m/min Workpiece width min./max.: 20/230 mm Workpiece height min./max.: 8/160 mm Spindle diameter: 40 mm Segmented pressure shoe table 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 7.5 kW 5th bottom spindle: 7.5 kW 6th universal spindle: 11 kW Total installed power: 55 kW Total current draw: 119 amps Main fuse: 125 amps Transport dimensions: 4500 x 2000 x 1800 mm (L x W x H) Transport weight: approx. 5,000 kg - Year of manufacture: 1998 - Documentation available: No - CE certificate available: No - Serial number: 82747 - Number of spindles [pcs]: 6 - Spindle 1: - Spindle type: Bottom - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 2: - Spindle type: Right - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 3: - Spindle type: Left - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 4: - Spindle type: Top - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 5: - Spindle type: Bottom - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 6: - Spindle type: Universal - Motor power [kW]: 11 - Spindle diameter [mm]: 40 - Min. planing width [mm]: 20 - Max. planing width [mm]: 230 - Min. planing height [mm]: 8 - Max. planing height [mm]: 160 - Feed speed: - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 36 - Current draw [A]: 119 - Main fuse [A]: 125 - Power rating [kW]: 55.0 - Transport dimensions: 4500mm x 2000mm x 1800mm (L x W x H) - Transport weight [kg]: 5000 kg Financial information VAT: The indicated price is exclusive of VAT VAT/Profit margin scheme: VAT is deductible for businesses Delivery and trade-in of any industrial equipment possible at any time Yorick Diebels

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Manufacturer: Dimter Bdjdpfxewya Sye Admjk Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cutting system with 1 x OptiCut 450 and feeding system F 100 featuring LuxScan CombiScan+ C 200 with curvature measurement The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Sąlyga: naudotas, Gamybos metai: 2000, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E 6 spindles (including 2 right-hand spindles), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle (bottom): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–180 mm Rebate device incl. tool Table insert hardened in front of 1st bottom spindle 2nd spindle (right): 11.0 kW ----- Common motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 3rd spindle (left) ----- Common motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm Pressure shoe in front of left spindle, incl. lateral spring-loaded roller pressure 4th spindle (right): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 5th spindle (top): 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 45 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from tool, spring-loaded 6th spindle (bottom): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment range: 45 mm Spindles in general ----- All moulding spindles with high rotational accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Infinitely variable mechanical feed 6–36 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled for up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment range of feed rollers relative to left spindle: 35 mm Extension of the oscillating shaft relative to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz Machine base, tables, and fences ----- Planer table 2.5 m long (incl. straightening guide) Aluminium extension 0.5 m for planer table, incl. extension of straightening guide Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swivelled away, opposite right spindles for easy tool change Machine operation ----- Bdsdpfxewqr Rvo Admsk Pressure shoe in front of top spindle with mechanical digital display. Outfeed after top spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindle No. 3 and 4 Minimum working height: 12 mm Electric height adjustment of top spindles and feed Central lubrication points positioned at the front of the machine Safety and sound...

Sąlyga: labai geros būklės (naudotas), Keturių pusių obliavimo staklės WEINIG Unimat 23 E maksimali obliavimo plotis 230 mm, obliavimo aukštis 130 mm, 5 velenai, Rankinis obliavimo matmenų nustatymas, Bdsdpfoxvc Uaox Admek velenų išdėstymas: apatinis 7,5 kW; kairys ir dešinys – 11 kW; viršutinis 11 kW; apatinis 7,5 kW, varikliai su stabdžiais, veleno skersmuo 40 mm, Pilnai reguliuojami velenai, Įrenginys turi 4 traukiančius volus stalviršyje, tinka drėgnai medienai, padavimo sistema su kardano velenais, bepakopė reguliacija Įranga parduodama su galvutėmis, matomomis ant velenų, kardano velenai nesudilę, stalai nenudilę, veikia sklandžiai, be vibracijų ir drebėjimų, obliavimo staklės tvirtos, originalios, svoris apie 5 t. Labai gera būklė, viskas veikia.

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Bedpfxju Atmue Admodk Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Sąlyga: naudotas, Gamybos metai: 1999, Keturpusė obliavimo staklės Mažoji Unimat 23 E Bdsdpewnh Sqofx Admok Pagaminimo metai: 1999 Serijos numeris: 88103 Padavimo greitis: 5/24 m/min Rušinės plotis min./maks.: 20/230 mm Rušinės aukštis min./maks.: 8/160 mm Veleno skersmuo: 40 mm Įvado stalo ilgis: 1950 mm Griovelių stalas 1. apatinis velenas: 5,5 kW 2. ir 3. dešinysis ir kairysis velenai: 11 kW 4. viršutinis velenas: 15 kW 5. viršutinis velenas: 11 kW 6. apatinis velenas: 5,5 kW Bendra galia: 54 kW Iš viso 117 amperų. Saugiklis: 125 amperų. Transportavimo matmenys: 4200x2000x2100 mm (IxPxA), Svoris +/- 4500 kg. - Pagaminimo metai: 1999 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Serijos numeris: 88103 - Velenų kiekis [vnt.]: 5 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir priėmimas galima bet kada viskam iš pramoninės srities Yorick Diebels