Keturių pusių obliavimo staklės Weinig Unimat 17A

WEINIG Unimat 17A

Būklė: geras (naudotas), Gamybos metai: 1981, Užklausoms: Zoltán Utasi Plus 36 30 205 7380 Veleno konfigūracija: Apačia Dešinė Kairė Ksdpoy Nmv Dofx Aldedn Viršus Apačia Veleno greitis: 6000 aps./min Darbinis plotis: 170 mm Darbinis aukštis: 120 mm Lygiavimo stalo ilgis: 2 m Įrengta Waxilit pompa Nuolat reguliuojamas padavimo greitis: 7–18 m/min Šoninis spaudimo volelis Motorizuotas spaudimo balkio reguliavimas Įrengta su 5 pjovimo galvomis (3 vnt L180 mm, 2 vnt L130 mm) Galima mašinos dokumentacija

Būklė: labai geros būklės (naudotas), WEINIG Hydromat H23 Line, S/N 87321, Year of manufacture 1999, Ref. No. 103437 Kdedjwvqklepfx Aldjn WEINIG Cross Conveyor HighMech E-1, with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed: 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/brake combos • Pneumatically supported pressure rollers from above • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1, 6, 7, 8, 9 with counter bearings • Spindles 8 & 9 with straight jointer • Spindles 8 & 9 with profile jointer • Spindles 6 & 8 with pneumatic pressure • Reduced roller pitch on feed system • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported lateral pressure rollers • Automatic table lubrication • Central lubrication points • Freestanding operating panel • Total connected load approx. 145 kW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without planer heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors fitted with NEW bearings NEW electronic motor soft start / braking devices NEW hard-chromed table plates NEW hard-chromed fences Many additional NEW PARTS fitted in the machine Condition: See attached photos – technically in first-class condition Infeed mechanisation unrefurbished – all parts complete and functional Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Subject to prior sale and errors excepted.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1981, VIERSEITEN-HOBEL- UND PROFILIERMASCHINE WEINIG UNIMAT 17 A mit 5 Spindeln Technische Daten: Kedpfxogqruns Aldsdn Arbeitsbreite: max. 180 mm Arbeitshöhe: 120 mm Spindeldrehzahl: 6.000 U/min Spindeldurchmesser: 40 mm Kleinster Werkzeugdurchmesser: 100 mm Max. Werkzeugdurchmesser: 160 mm Max. Durchmesser der vertikalen Spindeln: 180 mm Max. Werkzeugdurchmesser der 2. rechten Spindel: 195 mm Max. Werkzeugdurchmesser der oberen Spindel: 200 mm Max. Werkzeugdurchmesser der unteren Spindel: 180 mm Vorschub stufenlos: 7 – 18 m/min Durchlauf mit Federandruck Kettenantrieb (kein Gelenkwellenantrieb) Spindelanordnung: 1. Spindel unten waagrecht (Hobel), 4 kW 2. Spindel rechts vertikal, 3 kW 3. Spindel links vertikal, 4 kW 4. Spindel oben waagrecht, 5,5 kW 5. Spindel unten waagrecht, 4 kW 1 Satz Hobelwerkzeuge im Lieferumfang enthalten 380 V / 50 Hz GEBRAUCHTE MASCHINE IN GUTEM ZUSTAND, VOR AUSLIEFERUNG IN UNSERER WERKSTATT GEPRÜFT

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Kjdpfxeu Agh Ss Aldsdn Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: naudotas, Velenų skaičius: 6 vnt. Ksdpfjya Hh Tex Aldsdn Darbinis plotis: 230 mm Obliavimo aukštis: 120 mm Obliavimo ir profiliavimo automatas Weinig Unimat 500, skirtas keturpusiam medienos obliavimui ir profiliavimui. Staklės turi atminties sistemą su elektroniniu (ašininiu ir radialiniu) 2-5 velenų pozicionavimu. Su griovelio stalu, kompaktiška kabina ir labai gera originali būklė. Komplekte: - Peilių galąstuvė kaip Rondamat 931 - Centrolock obliaus galvos - Profilmės galvos - Atsarginiai peiliai - Platus priedų asortimentas. 1 velenas: apatinis / 40 mm 2 velenas: dešinys / 7,5 kW / 40 mm 3 velenas: kairys / bendras variklis su dešiniu / 40 mm 4 velenas: viršutinis / 7,5 kW / 40 mm 5 velenas: apatinis / 40 mm Valdymas: Atminties sistema

Būklė: naudotas, Gamybos metai: 1980, Nr. 3192 Four-Side Planer WEINIG U 17 A Used, year of manufacture 1980, machine available from February 2025 Machine still in operation 6 spindles Spindle arrangement: bottom - right - left - top - bottom - bottom Working width: 170 mm (with tool diameter of 125 mm) Working height: 120 mm (with tool diameter of 125 mm) Jointing spindle: 4 HP All other spindles: 5.5 HP Feed drive: 2 or 3 HP Spindle speed: 6,000 rpm Working spindle diameter: 40 mm Minimum cutter block diameter for profiling spindles: 100 mm Maximum cutter block diameter for profiling spindles: 180 mm Continuously adjustable feed: 6 - 18 m/min Feed roller diameter (hardened): 140 mm Feed roller width: 50 mm Adjustment range for infeed table and right jointing fence: 10 mm Vertical spindle adjustment range below table: 40 mm Horizontal spindle axial adjustment range: 30 mm Kjdpjvkhccjfx Aldedn Surface table length: 2 m Sale on behalf of customer, ex location Upper Austria, without dismantling, without transport and assembly Subject to errors in description and price Dismantling, transport, and loading by us is optionally available To avoid potential misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture, and scope of delivery based on information from the manufacturer’s brochure and the previous owner, without guarantee Subject to prior sale No warranty on used machines; the sale is "as inspected" Pictures and videos are for example purposes and do not represent the actual delivery scope Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Būklė: naudotas, mašinos/transporto priemonės numeris: 209, Spindelpresse Tränklein SP, Serien-Nr. 209 Pressfläche maximal 300 x 400 mm Kdodpfxoupy Tge Aldsn Online-Video-Inspektion per Skype-Video möglich Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerstandort: Emskirchen / Nürnberg – Test möglich

Gamybos metai: 1990, būklė: dilaminuotas dirbtuvėje (naudotas), Four-side planer WEINIG, 7-head, universal, head configuration: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and final universal head. Drive is implemented using cardan shafts. Head protection with Rotax safety clutches. Workpiece feed clamped pneumatically. Continuously adjustable feed through frequency inverter. Feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally equipped with new wiring and new electrics. Machine fully refurbished. Warranty provided. Kodpjpqxnxsfx Aldodn

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: nepatikrintas, darbinis plotis: 220 mm, obliavimo aukštis: 120 mm, ašies skersmuo: 50 mm, obliavimo plotis: 220 mm, darbinio aukščio: 120 mm, bendras svoris: 7 500 kg, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: trifazis, ašies skaičius: 10, galia: 105 kW (142,76 AG), įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, Working height: 120 mm, Kdjdpfx Aeu Udd Seldsn Spindle diameter: 50 mm, Feed: 7.5 kW / 8-40 m/min, Spindle arrangement: 1-Bottom (7.5 kW) - with hydro clamping 2-Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW) - with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydro clamping 7-Bottom (7.5 kW) - with hydro clamping 8-Top (7.5 kW) - with hydro clamping and straight jointer 9-Bottom (7.5 kW) - with hydro clamping and straight jointer 10-Universal (7.5 kW) 6 powered rollers in the table

Gamybos metai: 1987, būklė: paruoštas naudoti (naudotas), A four-sided planer Weinig, including automation, double cross-cut saw, infeed and extraction system, is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220 mm, working height: 140 mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50 mm. 2) Kellfass automation unit consisting of a double cross-cut saw, length: 5000 mm, buffer cross conveyor and pneumatic roller infeed. An on-site inspection is possible. Kdsdpfov T Apcex Alden