Formier

WEINIG Unimat 1000 Star

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, 5 kW air-cooled chiller for outdoor installation with axial fans. Standard equipment includes a p3 pump. Technical data available upon request. The machine is available from our stock in Güglingen. Rjdpfofqllljx Agijp We are happy to provide you with free, professional advice for your application. We constantly have a changing selection of chillers in all sizes available from stock—as demonstration units, new, or partly used machines. Additionally, we also accept refrigeration units as trade-ins, or purchase these directly.

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Rodpew Sy T Hefx Agijp Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: naudotas, Gamybos metai: 2000, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Padavimo variklis: 4 kW Padavimo greitis: 5–24 m/min. Weinig Unimat 23E keturpusio obliavimo ir profiliavimo automatas, skirtas medienai obliuoti ir profiliuoti iš visų keturių pusių, turintis mobilų veleną automatiniam reguliavimui bei griovelių stalą (pasirinktinai be griovelių stalo) trumpiems ir lenktiems ruošiniams bei ilgą lyginimo stalą. Papildomai: Pakeitimas į įprastą lygų stalą pagal užklausą. Rsdpowztw Sefx Agiop Velenas 1: Apačioje / 40 mm / 5,5 kW Velenas 2: Dešinėje / 40 mm / 7,5 kW Velenas 3: Kairėje / 40 mm / Bendras variklis su 2-uoju velenu Velenas 4: Viršuje / 40 mm / 7,5 kW Velenas 5: Apačioje / 40 mm / 5,5 kW

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm Redpot R T Hcefx Agijp - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Rsdpfopq If Dex Agiop Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naudotas, Gamybos metai: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with 90° transfer station Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space reserved for a sanding machine (optional) Rsdpsu Afu Rofx Agisp 3. VEN SPRAY PERFECT spray machine, length 5,510 mm 4. OIR flash-off dryer, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180-degree angle transfer with nozzle dryer 7. Supply air unit for angle transfer, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge area, conveyor of the UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Sąlyga: visiškai atnaujintas (naudotas),

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 070 mm, bendras ilgis: 2 000 mm, bendras plotis: 1 200 mm, bendras svoris: 600 kg, Comafer K100, output 100 kg/h Pellet 6mm, shavings 8-12% moisture content The material is ground by a mill to the required fraction (5.5 kW) and fed by a screw conveyor into a 7.5 kW ring die pellet mill, where it is compressed. Rodpfjw Hnglsx Agiop The process is fully automated and controlled from an electrical cabinet. Very high pellet quality.

Sąlyga: beveik kaip naujas (naudotas),

Sąlyga: naudotas, Velenų skaičius: 10 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Pavaros variklis: 5,5 kW Pavaros greitis: 6-36 m/min. Weinig Unimat 23EL obliavimo ir profiliavimo automatas – skirta medienos keturpusiam obliavimui ir profiliavimui, su mobiliu velenu automatiniam reguliavimui ir griovelio stalu trumpiems bei lenktiems ruošiniams, taip pat su ilgu tiesinimo stalu. Velenas 1: apačioje / 5,5 kW / 40 mm Velenas 2: dešinėje / 11 kW / 40 mm Velenas 3: kairėje / variklis bendras su 2-uoju velenu / 40 mm Velenas 4: dešinėje / 11 kW / 40 mm Velenas 5: kairėje / 5,5 kW / 40 mm Velenas 6: viršuje / 11 kW / 40 mm Velenas 7: apačioje / 11 kW / 40 mm Velenas 8: viršuje / 7,5 kW / 40 mm Rodow H Iv Tspfx Agisp Velenas 9: apačioje / 7,5 kW / 40 mm Velenas 10: universalus / 4 kW / 40 mm