Kampinių langų apdirbimo centras

WEINIG Unicontrol 12

Sąlyga: naudotas, Grooving spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, plus VARIO table and trimming carriage ..... Machine professionally dismantled and in stock at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical Data Summary (Please inquire about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guideline for cutting section recognition > Axial adjustment travel: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment travel: pneumatic, 8 positions for e.g. top edge rounding Kodpfx Afsx H Al Ne Isll Rounding unit ..... > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Maximum tool diameter: 130 mm > Axial adjustment mechanically linked to cross-cut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... > Length: 4500 mm 1st Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered 2nd Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing unit, including double-part singulation before infeed into the longitudinal processing. 1st Profiling Spindle (Climb and Counter Direction) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled to tool diameter 2nd Profiling Spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Sąlyga: naudotas, Slotting spindle 1 unit Number of milling units: 5 pcs Spindle diameter: 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and tenoning carriage ..... Machine still in operation, available for viewing! Optionally available with used tools and window construction software for data transfer to the Unicontrol 12! Technical Data Overview (Please inquire about any additionally included accessories) ..... Crosscut saw ..... > Crosscut saw, electronic, horizontal infinitely variable adjustment > Number of tools: 1 pc > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light to identify the cut section > Axial adjustment travel: 150 mm NC axis, electronically infinitely variable > Radial adjustment: pneumatic, 8 positions for e.g., edge rounding from above Rounding unit ..... > Position: horizontal, lower > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically linked with the crosscut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... > Length: 4,100 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with outboard bearing > Axial adjustment travel: 580 mm NC axis, infinitely variable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counterhold, entire clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-piece separation before entry into the longitudinal processing. 1st Profiling spindle (climb and conventional milling) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with outboard bearing > Axial adjustment travel: 350 mm NC axis, infinitely variable > Radial adjustment travel: 80 mm NC axis, infinitely variable > Spindle speed: 6,000 rpm > Minimum tool circle: 140 mm > Maximum tool circle: 232 mm > 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions 2nd Profile milling unit (grooving device from above) ..... > Position: horizontal, upper > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment travel: 30 mm, 8 positions > Radial adjustment travel: 125 mm, 8-position turret > Spindle speed: 9,000 rpm > Maximum tool circle: 130 mm Klodpfx Afexwdv Io Ijl 3rd Profiling spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with outboard bearing > Axial adjustment travel: 350 mm NC axis, infinitely variable > Radial adjustment travel: 80 mm NC axis, infinitely variable > Spindle speed: 6,000 rpm > Minimum tool circle: 140 mm > Maximum tool circle: ...

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, ilgio ribotuvas: 4 500 mm, įrankio skersmuo: 400 mm, veleno greitis (maks.): 6 000 aps./min, valdiklio modelis: Weinig Unicontrol 12, TECHNICAL DETAILS Crosscut Saw (electronic, horizontally adjustable, stepless) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment travel: 150 mm NC axis, electronically stepless Radial adjustment travel: pneumatic, 8 positions (e.g., edge rounding from above) Rounding Unit Position: horizontally at the bottom Axial adjustment travel: together with crosscut saw Electronic length stop Length: 4,500 mm 1st & 2nd Tenoning and Slotting Spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter bearing Axial adjustment travel: 580 mm NC axis, stepless Trailing counter (entire clamping length is countered) Kedpfexp U N Nex Af Iell 1st & 2nd Profiling Spindle Position: vertically right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter bearing Tool swing diameter (min.): 140 mm Tool swing diameter (max.): 232 mm Axial adjustment travel: 350 mm NC axis, stepless Radial adjustment travel: 80 mm NC axis, stepless Profile Milling Unit (Grooving device from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment travel: 30 mm NC axis, stepless Radial adjustment travel: 125 mm NC axis, stepless Spindle speed: 9,000 rpm Max. tool swing diameter: 130 mm 4th Profiling Spindle Position: vertically right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter bearing Axial adjustment travel: 350 mm NC axis, stepless Radial adjustment travel: 80 mm NC axis, stepless Spindle speed: 6,000 rpm Tool swing diameter (min.): 140 mm Tool swing diameter (max.): 232 mm 5th Profile Milling Unit (Hardware Spindle) Position: vertically right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment travel: 115 mm NC axis, stepless Radial adjustment travel: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Max. tool swing diameter: 210 mm 6th Profile Milling Unit (Grooving device from above), with auxiliary stand Position: vertically right, working from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment travel: 100 mm, 8 positions via pneumatic turret Radial adjustment travel: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Max. tool swing diameter: 180 mm 7th Profiling Spindle (Grooving device from below), with auxiliary stand Position: horizontally at the bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment travel: 100 mm NC axis, stepless Radial adjustment travel: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Max. tool swing diameter: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Control System: Weinig PC-Nexus, Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 Wood and Wood-Alu Further equipment details can be found in the attached document! Note: The machine has already been professionally dismantled.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Klodpfx Afemgc I Ne Ijl Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Unicontrol 12 Consisting of: cut-off saw unit (Pos. A), tenoning and slotting spindle (Pos. C), transfer belt (Pos. I), profiling spindle (Pos. L), profiling spindle (Pos. N), vertical profiling/router unit right (Pos. P). For manufacturing individual parts and elements in frame-based or series production. Comprises a cross-processing unit and a longitudinal-processing unit connected by a transfer belt. Working width: 40–140 mm (see pressure fence left 40–140 mm) Working height: 40–120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Kodpfxsumci Ss Af Isll Longitudinal processing: approx. 220 mm + 2 x end profile length Workpiece length max.: 3,500 mm The part dimensions depend on the machine configuration, production method, and tooling setup. A final definition of part dimensions is only possible after receipt, inspection, and approval of the complete and finalized setup drawings. Cross-processing: Table feed motor power: 0.3 kW (0.4 HP) Feed speed preset for sawing, profiling, and return: 3–25 m/min Vario table (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without tool-free clearance. Workpiece clamping by means of a clamp bridge. Actuated by a clamping cylinder installed under the table. Long stop: NC-controlled, mounted on the slotting table. Studio window feature, swiveling angle max.: +/- 75° The minimum workpiece length for angled windows depends on the angle and the wood width. Possible part dimensions for studio window (angled) production: Angle Max. working width Min. workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter-processing Commissioning not documented 1) NC angle adjustment automatic for processing angled parts Splinter guard by follow-up counter along the entire spindle length of the tenoning and slotting spindle for 90° machining. Manually adjustable counter wood strip for processing angled parts 2) Additional counter wood pieces