Apdirbimas

WEIMA WL 4

Infeed opening: 800x600 mm
Motor power: 18.5 kW
Hopper volume: 0.6 m³
Rotor diameter: 252 mm
Dimensions (L/W/H): 1700x1130x1595 mm
Weight: 1,300 kg
Operating hours: 1,741 h
WEIMA Shredder WL 4, machine thoroughly inspected
-----
Note:
The machine has been comprehensively inspected by us and runs flawlessly, see video.
Knives and slide plate were already replaced by the previous owner.
V-belt was replaced during our inspection.
1,741 operating hours

Description:
Weima high-performance shredders offer versatile applications and can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction even for bulky materials.

Mode of operation:
The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. The hopper can be adapted to individual requirements and ensures continuous and cost-effective feeding without the need for manual intervention.

The hydraulically controlled pusher automatically and load-dependently feeds wood waste into the rotor’s cutting area. The internal guide rails for the pusher are made from highly wear-resistant plastic (polyamide) and can be adjusted as needed. Hydraulic cylinders are mounted on universal joints to avoid lateral forces on the piston seals.

Dwjdpfevvx Dzex Af Hsc
The patented, profiled V-rotor made from solid steel has a diameter of 252 mm and operates at 80–120 rpm. The concave-sharpened, aggressive, and four-way reversible cutting crowns/knives are set into milled knife pockets on special holders. This patented system allows, for the first time, a reduced cutting gap between counter-knife and rotor, ensuring high throughput, low energy consumption, and optimal discharge of processed material.

The screen mounted beneath the rotor determines chip size (10–100 mm). A hydraulically opening screen basket is available upon request.

Power transmission from the electric motors is via V-belts to a robust gearbox mounted on one end of the rotor shaft.

Technical Specifications WL 4 / 18.5 kW
-----
Infeed opening: 600 x 800 mm
Standard hopper volume: 0.6 m³
Working width of rotor: 600 mm
Rotor diameter: 252 mm
Power: 18.5 kW
Rotor speed: approx. 90 rpm
Screen diameter: 15 mm
Paint finish: Weima standard
RAL 2002 / 7016
Connection rating: 400 V +/- 5% / 50 Hz
Weight: approx. 1,300 kg

Including:
Electrical control (Moeller / Siemens / Allen-Bradley)
Control cabinet (Rittal / Sarell)
Concave-ground reversible cutting crowns (40 x 40 mm)
Star-delta start
Vibration-damping base
V-rotor (Patented) with profiled milled knife pockets

(Technical data according to manufacturer – no guarantee!)

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.