Nerūdijančio plieno sraigtinis konvejeris

Waeschle DST 150 2960/300/H600 mm

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm • Spindle drive motor: 5.5 kW Itsdpfxjfu Ivze Abveg • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Klanke Supercut roll slitter for efficient shredding of reject rolls. Itjdpfx Aon I Rgpobvjg Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Made to order. Price and further information available on request. We will be happy to provide you with a non-binding offer.

Būklė: paruoštas naudoti (naudotas), Inkjet printer for frame bending machine Itodshzgtujpfx Abveg Length: 800 mm Width: 1000 mm Height: 1900 mm Weight: approx. 100 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram Itjdpfovf E Avsx Abveg - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Gamybos metai: 1994, būklė: geras (naudotas), Used M-Tec Ploughshare Mixer Itjdpoir E E Eofx Abvsg Model: MS-150 Batch Mixer Minimum mixing volume: 350 dm³ Maximum mixing volume: 1500 dm³ Motor: 37 kW, 115 rpm Includes Specicon sampling unit

Gamybos metai: 1997, būklė: geras (naudotas), Type: DDA:VP-370:A27097 Itedpfxst S Sxgj Abvjg Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via gear motor

Gamybos metai: 2004, būklė: geras (naudotas),

Būklė: labai geros būklės (naudotas), HAVER&BOECKER 1-žiočių maišų pakavimo įrenginys Itjdex H Nczepfx Abveg

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The ASCO® SD COMPACT trommel screen is built from a robust, foldable construction, and the machine is a semi-mobile unit. The trommel is used for screening coarse materials such as soil, gravel, wood chips, various types of waste, and bundles of shavings, making it ideal for the recycling industry. Iodpfxsr Aknds Abvjtg The trommel screen can be upgraded with a hopper and extension. This configuration creates a system with a feeder belt that can be operated in both directions, is quick to change over, and features a fully electric control system. With the extension, the screening surface is increased, and the option for a third fraction becomes available. It is important to note that both the main trommel and the extension allow for drum changes. There are seven different drums available for the main trommel and four different drums for the extension. Technical data: - Trommel length: 2.1 m - Usable trommel length: 1.7 m - Trommel outer diameter: 1.3 m - Usable screening area: 7 m² - Bucket width: 2.3 m - System throughput: 20–50 t/h - Mesh size: Ø6 – Ø100 mm - Hopper opening: 2.24 x 0.85 m - Speed (adjustable): 5–20 rpm - Drive power: 400V / 5.5 kW (optional 7.5 kW) - Feed height: 2.55 m - Weight: 1,500 kg - Length: 3.34 m - Width: 2.36 m - Height: 1.95 or 2.92 m (with support) Options: - Vibrator motors for hopper discharge - Bi-directional drum rotation - Six different drum variants - Cleaning brush - Simple drum exchange - Two-wheel drive - Operating hours counter

Gamybos metai: 2024, būklė: naujas, Overband Plate Magnet with Cleaning Mechanism Design in tightly welded stainless steel (VA 1.4301) Including cleaning drawer Dimensions: 800x500x180mm 4 pcs M16 eye bolts on the rear side These two lifting magnets were used by one of our customers as 'police magnets' in the meat processing industry. Both overband magnets are in excellent condition. The indicated price refers to one unit. Currently, 2 units are available for immediate delivery from stock! All information is provided without guarantee, offer valid while stocks last! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Our core competency lies in delivering exactly what the customer truly needs. Together with our customers, we develop customized, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone as well to find a suitable solution for your application. Overband Plate Magnet Design in tightly welded stainless steel (VA 1.4301) Including cleaning drawer 420 x 420 x 200mm 420 x 420 x 250mm 620 x 420 x 200mm 620 x 520 x 200mm 800 x 500 x 200mm 800 x 520 x 250mm Itsdohfwmdspfx Abvog Completely welded stainless steel housing for protection of the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of accumulated contaminants. Suitable for installation above all conveyor systems...