Juostų rišimo mašina

Cyklob XZE-3111- GL 2020 pallet conveyin

Gamybos metai: 2001, būklė: geras (naudotas),

Būklė: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: A1711012, Pos. 1 VEN CLEAN Smart Dust Extraction Unit Compressed air dust extraction system for cleaning workpieces to be painted, specifically for removing dust from profiled workpiece surfaces. Five rotating air-blast stars are installed, which remove dust from the surface. The loosened dust is extracted from both sides via extraction ducts. An external extraction system provided by the customer is required. Technical Data: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Overall width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization via nozzle bar (non-ATEX) with compressed air nozzles, Compressed air consumption: 840 Nl/min Pos. 2 VEN SPRAY Comfort Automatic Spraying Machine - Manufacturer: Venjakob Ppodpju U Ryyefx Adzjt - Model: VEN SPRAY Comfort CNC 7000 - Year of manufacture: 2017 - Length: 4,350 mm - Working height approx. 930 mm +/- 20 mm - Working width: 1,300 mm - Operator side: left - Price for overhauled machine - Current condition: machine not overhauled - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Feed speed continuously adjustable: approx. 2–6 m/min - With belt cleaning system with tungsten carbide scraper Complete pre-installation for retrofitting a second washer is provided. - Gun control, Touch Screen CNC7000 - 1 installed paint circuit (additional circuits optional) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Power supply: 400 V / 50 Hz - Colour: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer you assembly and commissioning of the system, as well as training for your staff. Upon request, we also provide regular maintenance and servicing for the machine. For further information, simply contact us!

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm • Spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH Ppjdpfx Ajfu Ivzedzst

Būklė: naudotas, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1,845 mm Podpfxebn Amfj Adzept Table Length / Clamping Length: 5,505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot pitch: 263 mm Overall Length: 6,230 mm Total Plate Height: 350 mm Weight: 11 t

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Pedovf E Avopfx Adzspt Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), ARTIKEL: A-QB1200, PULVERBLANDER FOODTECH Dissolver-blanderenhed PU133 Mærke: QB Food Tech. Type: QB 1200 Volumen: 1.200 liter. Ppsdpfepcg Haox Adzet Med kappe til køling/varme. Blandeomrører. Vægtceller.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2000, veikimo valandos: 25 000 h, X ašies eiga: 10 300 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 800 mm, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, frezos galvos padėtis: 2.5 x 2.5 °, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 60 aps./min, stalo plotis: 3 300 mm, stalo ilgis: 12 000 mm, tvirtinimo skersmuo: 50 mm, bendras aukštis: 48 750 mm, bendras plotis: 100 000 mm, bendras ilgis: 212 000 mm, bendras svoris: 100 000 kg, Duplexfräsen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann mit zwei Spindeln gleichzeitig bearbeitet werden. Produktionssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Steigerung der Teilegenauigkeit, da die Bearbeitung des Werkstücks in den meisten Fällen in nur einer Aufspannung erfolgen kann Bedienung durch nur einen einzigen Maschinenführer möglich Reduzierter Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation durch hohe Produktivität Duplex-Lösungen ermöglichen unterschiedliche Konfigurationen: einzelner Arbeitsbereich oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern folgender Hersteller: CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo Technische Daten: X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 – 3.000 U/min Spindelaufnahme: 50 ISO/BT/MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf mit automatischer Indexierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Pedpfxsrx Rxte Adzopt Gewicht: 100.000 kg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, 1 unit of used CONCRETE BATCHING PLANT In EXCELLENT condition! Manufacturer: EUROMECC Model: EURO 5 MIX Year of manufacture: 2019 Theoretical output: approx. 60–75 m³/h Total production to date: 95,000 m³ Aggregate storage – High silo / inline silo Capacity: 5 aggregate bins, each 45 m³ Inline silo loading via feeding conveyor Truck loading (hopper volume 25 m³) Plant supplied COMPLETE with WINTER ENCLOSURE Mixer: 1 planetary mixer with agitator 1x EUROMECC MEP 3000/2000 Dosing: Aggregates: Weigh belt (4 load cells, 5,000 kg) Water: 1 water scale (500 kg) Additive dosing: 1 additive scale, 2x12 l Cement: 1 cement scale (1,000 kg) Cement silos, 6 units: 2 x 150 m³ (D= 4.6 m) 1 x 90 m³ (D= 3.5 m) 1 x 45 m³ (D= 3.5 m) Control container / operator station included Control system: ElettronData Optional with warm air heating in container Optional with additive storage in container Optional with residual concrete recycling plant The plant is in very good and fully operational condition! AVAILABLE IMMEDIATELY Location: Denmark Price: on request Offer is net ex location. Subject to prior sale, errors and/or misrepresentations excepted, without warranty and/or guarantee, sold as seen, ex-situ and/or standing. Any reproduction, further use, publication and/or copying of this Ppjdpfoxn A Nbjx Adzet offer is strictly prohibited in its entirety!

Būklė: labai geros būklės (naudotas), Self-loading press for laminated wood Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Podpfx Aov Nhx Ujdzjpt Automatic material loading Glue application system Shelves heated by oil up to 130°C Upper pressure force: 57 t Side pressure force: 9 t Year of manufacture: 2001 CE certificate

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1993, mašinos/transporto priemonės numeris: 1590, Įranga: hidraulika, kabina, Zenith Maschinenfabrik GmbH Neunkirchen/Siegerland, Deutschland Gebraucht zur Herstellung von vibrogepresstem Betonpflaster und Bordsteinen. Die Maschine ist voll funktionsfähig und wird zusammen mit 2 Mischern, Zuschlagstoffbunkern, Aufgabewagen (Skipper), Verpackungsmaschine und 150 Fertigungspaletten geliefert. Außerdem sind Formen für verschiedene Pflastermodelle im Lieferumfang enthalten. Zum Verkauf steht ebenfalls eine mobile Zenith 941 II A aus dem Jahr 1978, die noch mit dem Typenschild versehen ist. Ppedpfxeucruus Adzet Die Maschine wird verkauft, da sie durch neuere Technologie ersetzt wurde.