Centralizuotas tepimas

Vogel MAHO 122 049 306 MH 800C

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Ibodpeunt Eyjfx Abkof Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Space requirements approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Gamybos metai: 1969, Sąlyga: paruoštas naudoti (naudotas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, complete with documentation; on-site inspection is possible. Iodpsqzkdmjfx Abksbf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, bendras aukštis: 2 100 mm, bendras plotis: 2 100 mm, bendras ilgis: 2 300 mm, stalo plotis: 450 mm, stalo ilgis: 750 mm, sukimosi greitis (maks.): 4 500 aps./min, sukimosi greitis (min.): 1 aps./min, bendras svoris: 1 900 kg, ruošinio svoris (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, speeds 1 - 4500 rpm, motor 4.5 kW, spindle SK 40, Heidenhain TNC 320 control, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Ibedpfxswb Erzs Abksf

Gamybos metai: 1978, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Ibedobx Elispfx Abkof Table size: AT-F 205 x 345 mm Required space: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V: 1/3 power loss), accordingly 0.6 kW

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Ibedpfjfxyhfox Abksf Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naudotas, Gamybos metai: 2007, Grinding range: 600 x 450 mm Magnetic table size: 600 x 400 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Total power requirement: 11 kW Ijdjvy Ip Iepfx Abkobf Machine weight: approx. 2.1 t In our assessment, the machine is in good used condition and can be inspected under power by prior appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical specifications and details are subject to change and error. Prior sale reserved!

Sąlyga: geras (naudotas), Gamybos metai: 1988, šlifavimo ilgis: 1 000 mm, šlifavimo plotis: 550 mm, šlifavimo aukštis: 400 mm, šlifavimo disko skersmuo: 400 mm, šlifavimo ratuko plotis: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electronic straight dressing device with compensation Ibodpfxju Rqyns Abkjf Vertical digital readout Mounting for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW 1435 rpm Wedge-shaped leveling pads Coolant system with universal paper band filter Complete documentation

Sąlyga: labai geros būklės (naudotas), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has barely been used. TECHNICAL DATA Polishing wheel: 100 – 500 mm Ibedsu Hanyepfx Abkof Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table size: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2000 kg Isdpfx Ajfcw Apebkjbf Height: 2100 mm Width: 1100 mm Depth: 1500 mm

Sąlyga: naudotas, Gamybos metai: 2000, Grinding length: 800 mm Centre height: 150 mm CNC control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Iedpfx Aou Hag Nebkebf Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° degrees Workpiece spindle speed: 22-313 / 51-750 rpm Workpiece headstock swivel: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight: approx. 4.0 t Required space (LxWxH): approx. 3.7 x 2.2 x 1.9 m Includes: - Coolant system - Enclosed steady rest - Diamond dresser - Open steady rest - 3 grinding wheels - 3 flanges - Internal grinding spindle attachments