Langų frezavimo įrankis

VIVALDI Ø 190 x 90 mm

Sąlyga: naudotas, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm Ffsdpfxjvu Hghe Ab Set > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Sąlyga: geras (naudotas), Slotting discs, window milling tool, indexable inserts, window construction tool Ffjdpfxjb A Np Ne Ab Sst - Slotting discs, milling tool for: wooden windows - Dufix: No./Var 46616 - Bore: Ø 50 mm - Weight: 6.8 kg

Sąlyga: naudotas, Tenon and mortise machine, tenon cutting machine, tenoning machine, slotting rotor, tenon cutting and slotting machine, slot and tenon milling machine - Manufacturer: Festo, tenon cutting and slotting machine - Type: ZA 101/S - Technical data: see nameplates/photos - Dimensions: 1675/1545/H1330 mm - Weight: 546 kg Ffedpfsf D H E Nsx Ab Set

Sąlyga: labai geros būklės (naudotas), Tenoning and Mortising Machine WEINIG Type 51 Swiveling sashing window unit with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping Automatic counter timber changeover Cross-cut saw Pneumatically indexed 4-position turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slot spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Max. tool diameter 320 mm Length stop system Machine incl. operating tools Ffodpfx Aov Tb Hgob Sjt Installation dimensions (L x W) approx. 2,700 x 2,800 mm Weight approx. 2,000 kg Note on used machines: • Errors in technical specifications and intermediate sale reserved. • Prices stated are ex location – free loading! • Machines have been cleaned and function-tested. • All machines are bought as seen without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in writing. (Inquiries will only be answered when providing your address and telephone number!)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, CMB SFR 4500×200 Frame Press Working length: 4500 mm Working width: 200 mm Ffjdov Scz Ajpfx Ab Sst Working height: 1200 mm Number of vertical clamps: 9 Number of front clamps: 4 Operating pressure: 250 bar Hydraulic pump motor: 1.5 kW Weight: approx. 2500 kg

Sąlyga: geras (naudotas), Gold / Stehle / Fantacci / Leitz Fsdpfxeixtudo Ab Soft Window frame tools used various types available on request

Sąlyga: naujas, Werkzeuge für Zapfenschneidmaschine Ffjdpfx Aed Ezqusb Sot 4 Stück Werkzeuggruppen, Durchmesser 300 mm, Z=4, Bohrung 50 mm

Sąlyga: geras (naudotas), Pjovimo diskai, langų frezavimo įrankis, keičiamos plokštelės, langų gamybos įrankis - Pjovimo diskai, frezavimo įrankis mediniams langams - Gamintojas: OPPOLD - Tvirtinimas: Ø 40 mm - Kaina/Pardavimas: pilnas komplektas - Kiekis: 1 paletė įrankių, įvairių dydžių - Svoris: 46 kg Ffodpfx Abjb A I Hls Sst

Sąlyga: naudotas, Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm #2809 Weinig Unicontrol 6 Technical Data Overview (Please inquire for any additionally included accessories) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detection of saw sections CNC-controlled length stop ----- > Length: 3500 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and Grooving Spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (climb and counter-rotation) ----- > Position: vertical, right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical, right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 axially synchronized feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glazing bar components) Glazing bar guide comprises: Top glazing bar support rail in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal Profiling Unit, Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions by pneumatic turret > Radial adjustment: 110 mm, 8 positions by pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Ffsdpfxjxtvgkj Ab Sst Additional Features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Rebate device for splinter-free rebating > Double parts package > Return device for single-operator usage: swing conveyor belt > Screen control > Tilted window device > Electronic angle display for slanted windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Crosscut saw: 80 mm Grooving spindle: 140 mm Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Grooving device f...

Sąlyga: geras (naudotas), core drill, core drilling machine, diamond core bit, core bit Fedeb A I U Aspfx Ab Soft - Core drill: Ø 1x50/1x63/1x68/12x90/5x100/1x81/3x80/2x65/1x120/1x130 mm - Quick-change mount: SDS Max - Weight: 42 kg