Įrankiai, skirti paduodamos medienos dygiavimo mašinos

RESCO TENONE

Sąlyga: naudotas, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Fedpfx Ajvu Hghjb Sjft Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Sąlyga: naudotas, Gamybos metai: 1985, Svoris: apie 3000 kg Matmenys: apie 3700 x 2000 x 1600 mm Sandėliavimo vieta: Nattheim Ffjdpevvi Ttofx Ab Sst

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical data: Edge thickness, coil material: 0.4 - 3 mm (material-dependent) Edge thickness, strip material: 0.4 - 8 mm (material-dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (restrictions possible with certain units) Fedpfx Abjxymd To Seft Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - Three-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence, 1252 mm - I-Tronic package - Edge Control PPC 322 W control system - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy-saving mode - Prepared for RETURN connection (third-party products) - Guide system BS 501; ensures right-angled feeding for edge-banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing cutter unit FG201 with 2 milling heads, 64 mm high - Edge feeding unit MG 301 - GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via metering sleeve and sensor nozzle for compensation of panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional PUR adhesive processing; the vacuum pump extracts the reaction agent (water molecules) from the PUR and thus the adhesive can remain in the system without curing. The vacuum pump operates independently of the machine’s power supply and automatically compensates any vacuum loss. - Full control over PUR! - Pressure section DW 301 with motorized NC axis; first roller driven with pneumatic immersion control, 2 conical follow-up rollers - GM301 spray application unit after pressure section for high-gloss edges (lubricant) - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Form trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Flat scraper FK702 - Complete separating and cleaning agent spray system - GM 301 spray application unit after pressure section (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery Availability: short-term Stock location: Hochheim

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza Ffedpfx Absmgc I Ns Sjt - Profilio freza - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: geras (naudotas), Gamybos metai: 2002, Edge banding machine with jointing cutters, otherwise fully equipped. PU adhesive can be used. Fodsgmn H Aspfx Ab Sjft

Sąlyga: naujas, Holzkraft minimax t 45c spindle moulder (5502044) Affordable, with fixed spindle and cast iron worktable. - Robust steel and cast iron construction - Equipped with fixed spindle - 3 spindle speeds from 3500 to 10000 rpm - Spindle with forward/reverse rotation - Large dimension cast iron milling unit, mounted directly on the table - Extraction hood below the worktable for improved dust extraction - Solid and precise cast iron table - Fast and effortless speed change - Powerful 5.0 kW motor - Standard supplied curved guard cover - Quality Made in Italy Equipment Details Cast iron milling unit - Mounted directly to the table - Spindle supported high up with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3500 to 10000 rpm Powerful Motors - Fitted with high-performance three-phase motor Fjdpekyt Ulefx Ab Sjft Spindle Guard The standard spindle guard is equipped with a height-adjustable guide rail and protective plate for maximum safety as standard. Spindle Fence - Precise fence with quick adjustment and fine adjustment via scale on the fence jaw - Integrated extraction port ensures clear visibility Table Opening - Large table opening also allows the use of larger raised panel cutters and tenoning or slotting tools both above and below the table Curved Guard Cover - Included as standard Reversible Fence Jaws - Versatile fence for bridging the tool gap - Enables safe operation even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimal protection on any spindle moulder, individually adjustable for any task - Universal base elements for mounting AIGNER safety and work devices - Quick adjustment by simultaneous clamping of all individually movable bars - High-quality aluminium construction - Universally usable on all HOLZKRAFT spindle moulders - 500 mm: Art. No. 5851000 - 650 mm: Art. No. 5851650 TECHNICAL DATA Dimensions and Weights Weight (Net) approx.: 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Working Table Table length: 1000 mm Table width: 575 mm Table height: 900 mm Installation Details Required floor space length: 1945 mm Required floor space width/depth: 920 mm Note on required space: The dimensions take into account maximum working ranges or usable lengths. Machine body length: 1000 mm Machine body width/depth: 575 mm Working area length: 1600 mm Working area width/depth: 1600 mm Note on working area: Add the indicated measurements to the required floor space for the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Supply frequency: 50 Hz Main drive motor output: 5.0 kW Spindle Usable spindle length: 100 mm Max. spindle projection above table: 130 mm Spindle speed(s): 3500/7000/10000 rpm Spindle shaft diameter: 30 mm Milling Tool Max. Diameter Max. diameter (retractable): 180 mm Max. profiling diameter: 210 mm SCOPE OF DELIVERY - Curved guard cover - Aluminium fence jaws Holzkraft specialist dealer – accessories available on request!

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW Ffodpfxjrigxye Ab Sot - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Sąlyga: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Ffsdpfxsvu Hfqj Ab Set Option with surcharge: EUR 6,500.00 Note...

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, supplied with documentation, has been regularly maintained. Fjdpfx Aoi E Trpob Sjft

Sąlyga: naujas, Dimensions (LxWxH): 2480 x 1230 x 65 to 105 mm Width: 1230 mm Length: 2480 mm Approx. weight: 675 kg Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for machining heavy workpieces, handling electric power tools, or working with chemical or oily substances. Thanks to transport bars integrated into the base, the tables can be easily relocated using a pallet truck and can be quickly adjusted in height to match other work surfaces. Height adjustment ranges from 650 mm to 1,050 mm (lower heights available on request). The solid steel tabletop, up to 20 mm thick, withstands even heavy impacts or blows—such as those commonly encountered when working with heavy hand tools or handling very heavy metal workpieces or tools—without suffering lasting deformations or indentations. The metallic work surface enables unrestricted use of magnetic clamps for securing components. Due to its substantial deadweight, this versatile table provides excellent stability against tipping—even when loaded with heavy items or tools at its maximum height position. For accessories and further information, please follow this link: Fedpfefk Ah Nsx Ab Sjft