Purškimo mašina Venjakob VEN SPRAY Perfect, 2018 m

Venjakob VEN SPRAY Perfect

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Dcsdpov I Akvefx An Hjh Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines Djdpfx Anjuiy Nyo Hech - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel

Būklė: naudotas, Gamybos metai: 2011, Technical Data: - Spraying Machine VEN SPRAY PERFECT - Year of manufacture: 2011 - Working width: 1,300 mm - Working height: 940 mm ±20 mm - Workpiece detection via light curtain - Control system: CNC 7000 - Control panel on the right side - Dual version Z16 gun drive - Water-sprayed extraction system - Extraction system in stainless steel design - Extraction connection diameter: 500 mm - Exhaust capacity: 10,000 m³/h - Paint recovery system via V-band - Continuously adjustable feed speed: 3–9 m/min - Installed spray circuits: 2 pcs. - Quick-change system for spray gun arms, 2 pcs. - Number of installed spray units: 4+4 pcs. - Number of material pumps: 2 pcs. - Supply air filter ceiling: G5 - Length: approx. 6,590 mm - Width: 3,666 mm (+1,152 mm) Dcodpfxeytuade An Hoh - Height: 2,500 mm - Total connected load: 22 kW - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Location: From 01/2025 in stock - Voltage fluctuations max. +/- 5% The photos show the spraying machine prior to refurbishment. _____ Optionally, we can provide you with an offer for installation and commissioning of the system, as well as training of your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Kantbandmaschine Hebrock K36 mit SPS-Steuerung, wartungsfreiem und beschichtetem Schnellheizleimbecken mit Vorbereitung für schnellen Leimtopfwechsel. - Touchscreen 10“ - Maximale Kantenstärke 3 mm - Minimale Werkstücklänge 200 mm - Minimale Werkstückbreite 80 mm - Vorschubgeschwindigkeit 10 m/min - Betriebsbereit in ca. 5 Minuten - Max. Anschlusswert 14 kW - Elektrischer Anschluss 400 V / 3 Ph / 50 Hz - Maschinenabmessungen 5250 x 1230 x 1430 mm - Gewicht ca. 1.700 kg Extras • Vorfräskopf Whispercut, Werkstückhöhe 60 mm • Beheizbarer Einlaufanschlag • Radius für Eckenrunder R = 2 mm • Schnellwechselvorrichtung für Motor Eckenrunder • Multi-Radiusziehklinge R2/R1 • 60 mm Werkstückhöhe – Eckenrunden • Trennmittel-Sprüheinrichtung • Reinigungsmittel-Sprüheinrichtung • Schutzsprühkante • Nesting-Vorrichtung • Pneumatische 3-Punkt-Verstellung • Multiwerkzeug (R2/R1/Fase) • LED-Innenbeleuchtung • Einrichtung für kurze Werkstücke • Vorbereitung für Rückführsystem (barbaric) • Achspaket / motorische Höhen-, Kanten- und Vorfräsverstellung Djdpfx Anewyu E Uj Hech • Zusätzliche Werkstück-Ein- und Auslaufunterstützung (je 450 mm)

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. Dodpfju R Szasx An Hech If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), Connected load: 4 kW, Weight: 1 t. Dcsdpfxjhlp Efj An Hsh

Būklė: naujas, Gamybos metai: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable drive Dcjdpeug Ty Hofx An Hoh Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Gamybos metai: 2023, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Mūsų kompaktiškas ekstruderis EX20-25d Gamintojas: PMH GmbH Sraigto skersmuo [mm]: 20 Sraigto ilgis [L/D]: 25 Sraigto sukimosi greitis [min-1]: 10-192 Sraigtas: nitriduotas Dedpfjq R Tkwsx An Hoch Sukimo momentas: 55 Nm Pavaros tipas: trifazis variklis su dažnio keitikliu Variklio galia [kW]: 1,1 kW Cilindro medžiaga: nitriduota Elektros prijungimo duomenys: 3 / N / PE Maitinimo įtampa [V]: 400V, 50 Hz Valdymo įtampa [V]: 24V Keraminės kaitinimo juostos [W]: 1200W Kaitinimo juostų skaičius: 3 Maks. našumas: apie 5 kg/h Maks. apdorojimo temperatūra [°C]: 300

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, Šis "BIESSE Selco WNT 630" plokščių pjūklas buvo pagamintas 2022 m. Jo didžiausias pjovimo ilgis - 3800 mm, pjūklo disko projekcija - 108 mm, o pakeliamo stalo keliamoji galia - 5 tonos. Idealiai tinka didelėms, iki 3660 x 2200 mm dydžio plokštėms pjauti. Jei norite gauti aukštos kokybės pjovimo galimybes, apsvarstykite mūsų parduodamą "BIESSE Selco WNT 630" stakles. Susisiekite su mumis ir gaukite daugiau informacijos. Dcedpeyf I U Sefx An Hoh

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: P 04-09-002, neu U05 10 001, Spray Automat Venjakob HGS-K All images for reference only. - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (expandable to 1000 mm) - Current condition: not refurbished - Offer price is for the refurbished condition - Operator side: right - Dual pistol drive system Dcodpfxsumvr Te An Hsh - Dry exhaust system: 4,000 m³/h - Exhaust connection diameter: 400 mm - Conveyor belt transport system - Feed rate continuously adjustable: 3 - 8 m/min - With paint recovery system - Gun control unit: LS 1 - Installed paint circuits: 1 - Airless spray system: 4 units of Krautzberger KAA 1300 - Number of paint pumps: 1 - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current consumption: 17 A, protection: 35 A - Location: in stock - Permissible voltage fluctuations: max. +/- 5% _____ Optionally, we can provide you with an offer for installation and commissioning of the system, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!